Overhead Transmission Lines
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Determination of Electric and Magnetic Field Calculation Uncertainty in the Vicinity of Overhead Transmission Lines
Abstract This paper presents a new approach for uncertainty determination of the electric field intensity and magnetic flux density calculation in the vicinity of overhead transmission lines. The proposed method is based on the law of propagation of uncertainty as defined in the Guide to the expression of Uncertainty in Measurement. A mathematical model is d
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Meshless Methods for Computation of Overhead Transmission Lines Electromagnetic Fields
Abstract The meshless element-free Galerkin method (EFGM) is used to solve partial differential equations responsible for obtaining the electromagnetic fields generated by a transmission line. For this purpose, a 2D model based in a real transmission line is constructed and simulated. The results obtained by EFGM have good accuracy and they are compared agai
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
3. The Smart Grid Concept in Oil & Gas Industries by a Field Trial of Data Communication in MV Power Lines
Abstract Nowadays, communication and networking technologies are essential for Oil & Gas industries in order to guarantee reliability, safety and low costs in the producing process. Information access and commands and set-points transmission from/to automation systems are challenging tasks mainly due to distributed production areas and hostile environments.
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2016-06
-
4. Influência da condutividade e permissividade do solo em função da frequência no cálculo da impedância longitudinal e admitância transversal de linhas aéreas de transmissão / Influence of earth´s conductivity and permittivity frequency dependence on longitudinal impedance and transversal admittance transmission line´s parameters calculation
This thesis aims to propose more accurate models for calculating the electrical parameters of overhead power transmission lines. The influence of earth s conductivity and permittivity frequency dependence is evaluated when calculating transversal and longitudinal transmission lines parameters in the frequency range 0 to 2 MHz. This frequency range covers the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/04/2010
-
5. Calculo dos parametros de linhas de transmissão trifasicas atraves das tensões e correntes em seus terminais / Calculation of parameters of thress-phase transmission lines through voltages and currents in their terminals
The objective of this work is to calculate the longitudinal and transversal transmission line parameters using phase currents and voltages. Developed equations are used, in the modal domain, considering current and voltages found between a line terminal and an open line terminal, and a short-circuit terminal. . Initially, the basic transmission line theory i
Publicado em: 2009
-
6. MÉTODOS ESTATÍSTICOS APLICADOS AO CÁLCULO DA AMPACIDADE E RISCO TÉRMICO DE LINHAS AÉREAS DE TRANSMISSÃO / STATISTICAL METHODS APPLIED TO AMPACITY AND THERMAL RISK CALCULATION OF OVERHEAD TRANSMISSION LINES
This work presents a new proposition for calculation of statistical ampacity and thermal risks associated to ampacity values by using simulation methods that employ intensive computation. The proposed approach uses Bootstrap and Monte Carlo simulation methods in order to calculate and infer information of statistical ampacity drawn from meteorological variab
Publicado em: 2008
-
7. Optical detection system of partial discharges on insulator strings of high voltage transmission lines / Sistema de detecÃÃo Ãptica de descargas parciais em cadeias de isoladores de linhas de transmissÃo de alta tensÃo
Leakage current monitoring is frequently used to evaluate the degradation in the insulation capacity of insulator strings of overhead transmission lines, due to pollution. The pollutants accumulation over the surface of the insulators strings, together with humidity, lead to an increase in the current leak over the insulatorâs surface, in turn producing the
Publicado em: 2008
-
8. AVALIAÇÃO METROLÓGICA DE ACELERÔMETRO ÓPTICO UTILIZANDO REDE DE BRAGG: APLICAÇÃO EM LINHAS DE TRANSMISSÃO DE ENERGIA ELÉTRICA / METROLOGICAL EVALUATION OF AN OPTICAL FIBER BRAGG GRATING ACCELEROMETER: APPLICATION IN OVERHEAD TRANSMISSION LINES
Overhead transmission lines play an important role on electric systems. Due to the high energy carried through those networks, failures on overhead lines can bring severe constraints on consumers supply, occasionally taking the form of blackouts in large geographic regions. Among the reasons of such failures is the breaking of electric cables caused by the f
Publicado em: 2005
-
9. Condensed transmission line model to electromagnetic transient phenomena : use of complex properties / Modelo reduzido de linhas de transmissão para transitorios eletromagneticos : aplicação de propriedades complexas
O objetivo deste trabalho é contribuir para o estudo de linhas de transmissão e o desenvolvimento de modelos de linhas voltados a programas do tipo EMTP. O trabalho desenvolvido consiste em aproveitar as propriedades e semelhanças dos modos não homopolares de propagação das linhas de transmissão, sejam elas idealmente transpostas ou que apresentem pla
Publicado em: 2005
-
10. Identification of Flexural Stiffness Parameters of Beams
A three degree of freedom model of the dynamic mass at the middle of a test sample, resembling a Stockbridge neutraliser, is introduced. This model is used to identify the hereby called equivalent complex cross section flexural stiffness (ECFS) of the beam element which is part of the whole test sample. This ECFS, once identified, gives the effective cross s
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2001
-
11. Identification of flexural stiffness parameters of beams
A three degree of freedom model of the dynamic mass at the middle of a test sample, resembling a Stockbridge neutraliser, is introduced. This model is used to identify the hereby called equivalent complex cross section flexural stiffness (ECFS) of the beam element which is part of the whole test sample. This ECFS, once identified, gives the effective cross s
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2001
-
12. INCREASE CAPABILITY IN EXISTENT TRANSMISSION LINES / RECAPACITAÇÃO DE LINHAS DE TRANSMISSÃO
A transmissão de energia elétrica através de linhas de transmissão aéreas encontra um grau de dificuldade muito grande na constituição de novas faixas de passagem e licenciamento de obras, devido, principalmente, à questão ambiental. Por outro lado, a crescente demanda de energia do sistema elétrico leva o sistema de transmissão a uma progressiva
Publicado em: 2000