Optimization And Simulation
Mostrando 1-12 de 268 artigos, teses e dissertações.
-
1. Optimization Techniques and Mathematical Modeling Applied to Reluctance Motors
Abstract The present work aims at the application of different optimization strategies in the electromagnetic analysis of the Variable Reluctance Motor (VRM) through Finite Element (FE) simulation. Two case studies are investigated: the first one aims to optimize the geometry and electrical characteristics of windings of a single-phase VRM 6/6, minimizing co
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Efficient Low-Complexity Optimized Channel Estimating Methods for OFDM-Based Low-Voltage Broadband Power Line Communication Systems
Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonlinear time-variant impulse response and noise interference effects introduced by the BB-PLC channel. In this paper, we append the Particle S
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Synthesis of Sparse Arrays Based On CIGA (Convex Improved Genetic Algorithm)
Abstract In this paper, a novel hybrid algorithm on beam pattern synthesis of sparse arrays is proposed, which aims at minimizing the peak sidelobe level (PSLL). Sparse arrays can provide higher spatial resolution and relatively lower sidelobe than general arrays, but it is necessary to solve the multi-constraint problem of nonconvex nonlinear. Thus, we prop
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-12
-
5. Análisis de materiales didácticos digitales ofertados desde un portal de contenidos abiertos: el caso de Canarias
RESUMO Apresenta os resultados de análise de uma amostra dos conteúdos e materiais didáticos digitais para a Escola Primária, disponibilizados em um portal web denominado Eco Escuela 2.0, desenvolvido pela administração educacional do Governo das Ilhas Canárias, caracterizado pelo acesso e uso livre por professores. O objetivo principal é realizar a
Educ. rev.. Publicado em: 31/10/2019
-
6. A Note on Parameter Identification of the AISI 304 Stainless Steel Using Micromechanical-Based Phenomenological Approaches
Austenitic stainless steels have largely been used in industrial equipment, architectural components and consumer items amongst others. Numerical simulation of manufacturing processes of such components and parts requires adequate hardening descriptions and accurate inelastic parameters. This work addresses these issues for the AISI 304 stainless steels base
Mat. Res.. Publicado em: 19/08/2019
-
7. Design and Analysis of Flexible Hinge Used for Unfolding Spacecraft Solar Panels
ABSTRACT: Two stiffness models for a flexible hinge with large rotation angle are established based on the pseudo-rigid body method and the series or parallel relationship of flexible units. Finite element simulation of the flexible hinge is conducted in ANSYS to verify the two stiffness models of the flexible hinge. A multi-objective optimization method is
J. Aerosp. Technol. Manag.. Publicado em: 18/07/2019
-
8. Synthesis of New Reconfigurable Limited Size FSS Structures Using an Improved Hybrid Particle Swarm Optimization
Abstract This paper describes a new design methodology for reconfigurable printed circuits with limited size, using an improved hybrid particle swarm optimization (HPSO) algorithm, reducing the search space by the definition of negative zones (NZ), regions where the swarm of particles should not travel. The proposed design methodology (HPSO-NZ) is used in th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
9. Developing a stepwise approach to simulate a hammer mill through the Whiten model - the adherence for a gold ore
Abstract Comminution represents a large portion of the capital and operating cost of a mineral processing plant. In 1983, Cohen estimated that comminution processes could account for 30% to 50% of the power consumption of the mill, and typically represents 50% of the operating costs of a mine. Therefore, its optimization is directly related to reduction of t
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
10. Sensitivity Analysis of Flexible Rotor Subjected to Interval Uncertainties
Abstract This paper aims at analyzing the sensitivity of the structural response of flexible rotors subjected to uncertain interval parameters. The interval approach encompasses both an uncertainty and sensitivity analyses. The uncertainty analysis consists in computing the interval uncertain structural responses by using the global optimization method. The
Lat. Am. j. solids struct.. Publicado em: 13/05/2019
-
11. Optimal Simulation of the Land-Use Structure Based on the Local Ecological Environment: the Case of Huanghua City in Hebei Province, China
ABSTRACT The overuse of land has resulted in a sharp decline in ecological functions, affecting the environment as it relates to the existence and sustainable development of the whole biosphere. This work aims to evaluate the ecological and economic efficiencies of the land-use structure. A simulation model, CLUE-S (Conversion of Land-Use and its Effects at
Rev. Bras. Ciênc. Solo. Publicado em: 15/04/2019
-
12. Scenario reduction using machine learning techniques applied to conditional geostatistical simulation
Abstract One of the basic factors in mine operational optimization is knowledge regarding mineral deposit features, which allows to predict its behavior. This could be achieved by conditional geostatistical simulation, which allows to evaluate deposit variability (uncertainty band) and its impacts on project economics. However, a large number of realizations
REM, Int. Eng. J.. Publicado em: 2019-03