Naoh
Mostrando 1-12 de 904 artigos, teses e dissertações.
-
1. Structural characterization of the stem cell wall lignin of Euterpe oleracea
Resumo Este trabalho teve como objetivo caracterizar a lignina na parede celular de Euterpe oleracea Mart. Foram adquiridas amostras de duas regiões da base da palmeira: região externa e região interna (OR e IR, respectivamente). A extração com solventes orgânicos e o tratamento com NaOH 1% foram realizados. O conteúdo de holocelulose, α-celulose e l
Ciência Florestal. Publicado em: 2022
-
2. Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants
Additive manufacturing is an emerging tool that has contributed to the sustainable fabrication of devices in several areas based on the concept of “zero waste”. Considering extrusion-based manufacturing (or 3D printing), polylactic acid (PLA) has been highlighted due to its biodegradability, obtention from renewable sources, and compatibility for 3D prin
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Otimização da extração de antocianinas presentes no feijão-preto e impregnação do extrato em matriz polimérica natural para uso como indicador de pH
OPTIMIZATION OF THE EXTRACTION OF ANTHOCYANINS PRESENT IN BLACK BEANS AND IMPREGNATION OF THE EXTRACT IN NATURAL POLYMERIC MATRIX FOR USE AS A pH INDICATOR. In this work, a method of extracting natural indicators, anthocyanins, present in black beans was optimized. The best extraction condition was obtained with 50 g of beans and 93 g of water, under agitati
Química Nova. Publicado em: 2022
-
4. Characterization and mechanical properties of one-part geopolymer based on a pure metakaolin
Abstract Geopolymers are amorphous silicate polymers that have been extensively studied due to their applications, scientific and technical relevance, and their potential as cement in substitution to Portland. Much of the focus has been in the use of precursors and aggregates that are rarely pure and homogeneous with the use of tailings being very common. Th
REM - International Engineering Journal. Publicado em: 2022
-
5. Processamento de catalisadores gastos de unidade de hidrodessulfurização profunda (ultra-deep HDS)
PROCESSING OF SPENT ULTRA-DEEP HYDRODESULFURIZATION CATALYSTS. This work discusses the recycling of spent NiMo/Al2O3 catalysts from ultra-deep hydrodesulfurization (HDS) units. They contain a refractory coke and fouling elements from the processed feedstocks. Samples were preoxidized (600 ºC) for 12 h using a very slow heating rate to eliminate coke and vol
Química Nova. Publicado em: 2022
-
6. Kinetic study and thermodynamic equilibrium modeling of the Co(II) and Mn(II) bioadsorption using the Rhodococcus opacus strain
Abstract Microbial biomass is considered a renewable and environmentally friendly resource. Thus, the research conducted a kinetic study and thermodynamic equilibrium modeling of the cobalt (Co) and manganese (Mn) bioadsorption process using the Rhodococcus opacus (RO) strain as a biosorbent. The inactive biomass subjected to 0.1 M NaOH pretreatment was brou
REM - International Engineering Journal. Publicado em: 2022
-
7. Comparação do processo de adsorção em batelada e em leito fixo do ácido naftênico 1,4-ciclohexanodicarboxílico em carvão ativado de osso de boi
RESUMO O ácido naftênico 1,4-ciclohexanodicarboxílico é um dos principais contaminantes do petróleo e das águas residuais de petroquímicas, podendo causar consideráveis danos às operações industriais bem como ao meio ambiente, devido ao seu caráter corrosivo e sua toxicidade. Uma operação que pode ser realizada para a separação deste contamin
Engenharia Sanitaria e Ambiental. Publicado em: 2022
-
8. Physical-mechanical behavior of alkali-activated materials produced by the one-part method based on fly ash and rice husk ash
Abstract The study on the physical-mechanical properties of alkali-activated materials (AAM) produced by the ‘one-part’ method was carried out. For this, residues such as fly ash and rice husk ash (RHA) were used. The alkaline activator (NaOH) was calcined together with RHA for 2 h at 750 °C. Dry mixes were prepared by replacing fly ash with 10%, 20%, a
Cerâmica. Publicado em: 2022
-
9. Tipo de auxina e veículos de diluição para a propagação vegetativa de Varronia curassavica Jacq e Melaleuca alternifolia Cheel
Resumo Estudos sobre propagação de espécies vegetais medicinais e ornamentais são de grande relevância por contribuírem para a sua domesticação, cultivo e produção. Entretanto, ainda há escassez de informações acerca da interação dos diferentes reguladores vegetais e veículos de diluição recomendados. Este trabalho objetivou avaliar os efei
Ornam. Hortic.. Publicado em: 2021-06
-
10. Optimization and Study of the Response Surface of Properties for the Synthesis of ZSM-5 Zeolites with Hierarchical Pore Structure Obtained by Desilication
Hierarchical ZSM-5 zeolites were prepared by alkali treatment (desilication) at two temperatures, two reaction times, and two NaOH concentrations. A 23 factorial design was used to study the effect of these variables on the crystallinity, microporosity, and mesoporosity of the zeolite due to the desilication treatment. The factorial design analysis showed th
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
11. Evaluation of the properties of a foamed geopolymer developed with different types of metakaolin
Abstract The physical and mechanical properties of foamed geopolymers were determined. The geopolymers were made with two different metakaolins (from Metacaulim do Brasil - MB, and Pantano Grande/RS - MPG) as precursors, with NaOH and Na2SiO3 as activators, and with the addition of foam, which was produced with the foaming agent diethanolamide of coconut fat
Cerâmica. Publicado em: 2021-06
-
12. MACROALGAE Fucus vesiculosus OIL: BIODIESEL PRODUCTION USING ALKALINE TRANSESTERIFICATION
This work studied the obtaining of methyl biodiesel and ethyl biodiesel using alkaline transesterification from macroalgae Fucus vesiculosos oil (FVO). FVO has 86.59% of its composition in unsaturated fatty acids, with a greater quantity of linoleic acid and oleic acid, a chemical composition near the soybean oil, the most used raw material for the productio
Quím. Nova. Publicado em: 2021-04