Microstructure Parameters
Mostrando 1-12 de 210 artigos, teses e dissertações.
-
1. Characteristics and utilization prospects of red ceramic waste in lightweight aggregates: a systematic review
Abstract Red ceramic waste (RCW) is one of the main by-products generated by the production of ceramic materials. Its application in lightweight aggregates (LWAs) has not yet been tested. Thus, this review intends to evaluate the perspectives of using RCW in the manufacture of LWAs. The search was carried out in the ScienceDirect database. 47 articles were s
Cerâmica. Publicado em: 2022
-
2. Editorial Comment: Vasectomy re-reversal: effectiveness and parameters associated with its success
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
3. Influence of sintering parameters on the microstructure and mechanical properties of nanosized 3Y-TZP ceramics
Abstract The fracture toughness of 3Y-TZP ceramics obtained from a nanocrystalline powder with an optimized microstructure and highly transformable tetragonal grains was investigated. Samples of ZrO2-3 mol% Y2O3 were sintered at temperatures between 1250 and 1400 °C, with isothermal holding times of up to 16 h. Samples sintered at 1250 °C exhibited relativ
Cerâmica. Publicado em: 2021-03
-
4. THEORETICAL UNDERSTANDING OF MORPHOLOGICAL DISTRIBUTION OF HYDROGEN IN AMORPHOUS CALCIUM SILICATE HYDRATE
Determining the morphological distribution of hydrogen atoms in calcium silicate hydrate phase (C-S-H) is of great concern but challenging. In this work, based on the stoichiometric composition of (CaO)1.7(SiO2)(H2O)1.8, a series of amorphous Ca1.7•Si•(O)3.7-x•(OH)2x•(H2O)1.8-x models are constructed using Monte Carlo method, where x represents the m
Quím. Nova. Publicado em: 20/07/2020
-
5. Snack bars enriched with Spirulina for schoolchildren nutrition
Abstract The aim of this study was to develop snack bars nutritionally enriched with Spirulina and evaluate if there was acceptance of the sensorial attributes by schoolchildren. Snack bars enriched with Spirulina (2% and 6%) and a control formulation (0% Spirulina) were prepared. The samples were evaluated regarding nutritional content, microstructure, and
Food Sci. Technol. Publicado em: 2020-06
-
6. Experimental and Theoretical Study of LiMn2O4 Synthesized by the Solution Combustion Method Using Corn Starch as Fuel
Lithium manganese oxide, LiMn2O4, was synthesized in two temperature stages, where the first consisted by an ecofriendly solution combustion method at 300 °C. Finally, the as-burned powders were thermal treated at 500 and 700 °C. The structural and morphological changes were evaluated by the Rietveld method and density functional theory (DFT) calculations.
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
7. Effects of Geometrical Feature on Microstructures and Mechanical Properties of Refill Friction Stir Spot Welding 6061 Aluminum Alloy
Refill friction stir spot welding (refill FSSW) is a solid state joining technology developed and patented by Helmholtz-Zentrum Geesthacht. Refill FSSW is a welding process suitable for spot joining lightweight materials in similar and dissimilar joint configuration. The result is a spot welded in lap configuration with minimal material loss and a flat surfa
Mat. Res.. Publicado em: 17/01/2020
-
8. Snack bars enriched with Spirulina for schoolchildren nutrition
Abstract The aim of this study was to develop snack bars nutritionally enriched with Spirulina and evaluate if there was acceptance of the sensorial attributes by schoolchildren. Snack bars enriched with Spirulina (2% and 6%) and a control formulation (0% Spirulina) were prepared. The samples were evaluated regarding nutritional content, microstructure, and
Food Sci. Technol. Publicado em: 20/12/2019
-
9. Microstructural Analysis of AgIn5VI8 (VI: S, Se, Te) Ternary Semiconductors by X-Ray Diffraction
This work is a study of the microstructural properties of the polycrystalline ternary compounds AgIn5S8, AgIn5Se8, and AgIn5Te8 by X-ray diffraction technique (XRD). The full-width-half-maximum (FWHM) of the XRD profile is measured as function of the diffraction angle and used to estimate the microstructural parameters. In general, a microstructural characte
Mat. Res.. Publicado em: 14/11/2019
-
10. Effect of Rolling Temperature on Microstructure and Mechanical Properties of a Nb-Mo Microalloyed Medium Mn Steel
Warm rolling of medium Mn steel is a promising technology to meet the needs of vehicle weight reduction and energy conservation while ensuring the safety for passengers. In this study, a novel Nb-Mo microalloyed 6.6Mn steel was subjected to a series of warm rolling tests at temperatures ranging from 630 to 690 ºC, based on the thermodynamic-based prediction
Mat. Res.. Publicado em: 11/11/2019
-
11. High-Frequency Induction Heating of Al-Si-Cu-Mg aluminum alloy in Thixoforming
Thixoforming is the process of shaping near net shape metal components in a semisolid state. The process consists of preparing feedstock, reheating and shaping. Reheating the billet is the most critical step in thixoforming. Induction heating requires precise temperature control to obtain globular microstructure and prevent process defects, such as insuffici
Mat. Res.. Publicado em: 28/10/2019
-
12. Intermittent vibrations accelerate fracture healing in sheep
Abstract Purpose: To investigate the effect of intermittent vibration at different intervals on bone fracture healing and optimize the vibration interval. Methods: Ninety sheep were randomized to receive no treatment (the control group), incision only (the sham control group), internal fixation with or without metatarsal fracture (the internal fixation gro
Acta Cir. Bras.. Publicado em: 12/09/2019