Microscopy
Mostrando 13-24 de 15344 artigos, teses e dissertações.
-
13. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
14. X-ray line profile analysis and magnetic and optical properties of FexZn0.95-xCr0.05O nanoparticles fabricated by sol-gel route
Abstract FexZn0.95-xCr0.05O nanoparticles have been obtained for the different concentrations of Fe ions by using the sol-gel method. The hexagonal wurtzite structure of all the samples was confirmed by Rietveld refined X-ray diffraction patterns. The addition of Fe ions decreased lattice constants a and c from 3.2487 to 3.2474 Å and 5.2043 to 5.2029 Å, re
Cerâmica. Publicado em: 2022
-
15. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022
-
16. Graphite-Polyurethane Composite Electrode Modified with Molecularly Imprinted Polymer for Determination of Diclofenac
A molecularly imprinted polymer (MIP) was prepared using the anti-inflammatory diclofenac (DCF) as a template. A non-imprinted polymer (NIP) was also prepared as a control. These MIP and NIP were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET), revealing a higher porosity in the fir
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
17. Scanning electron microscopy of panitumumab-induced eyelash and hair alterations - Pili canaliculi
Abstract Panitumumab is a monoclonal antibody against the epidermal growth factor receptor used in metastatic colorectal cancer; in addition to tumor cells, it acts on epidermal keratinocytes and on the outer root sheath and presents skin toxicity in up to 90% of cases. A scanning electron microscope was used to examine the eyelashes and hairs of a 65-year-o
Anais Brasileiros de Dermatologia. Publicado em: 2022
-
18. Characterization of micaceous minerals occurring in phosphate ores in Brazil: emphasis on the interstratified phyllosilicates
Abstract Micaceous minerals were characterized in three phosphatic ores from mines in Western Minas Gerais State, Brazil, all having complex chemical and mineralogical compositions, with emphasis on interstratified phyllosilicates. Knowledge of the relationship between the physical and chemical characteristics of the phyllosilicates contributed to a better u
REM - International Engineering Journal. Publicado em: 2022
-
19. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
20. Phase transformation of kaolinite to hexagonal kalsilite using K2CO3
Abstract Hydrothermal synthesis of kalsilite was facilitated by the inclusion of potassium carbonate (K2CO3) as the source of the potassium ion. After a 24 h reaction at 220 °C, kaolin clay treated with 1.25 M K2CO3 showed the most significant peaks at 2θ of 28.5° and 34.7° by X-ray diffraction corresponding to the hexagonal kalsilite. In addition, field
Cerâmica. Publicado em: 2022
-
21. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
22. Per-Aqueous Liquid Chromatography for the Separation of Polar Compounds Preparation and Characterization of Poly(ethylene oxide co dimethylsiloxane) Based Stationary Phase
Poly(ethylene oxide-co-dimethylsiloxane) was thermally immobilized on silica particles-Si(PEO)-to separate small polar compounds with water-rich mobile phases. Poly(ethylene oxide-co-dimethylsiloxane) content on Si(PEO) stationary phase was optimized using a central composite design. Infrared spectroscopy, scanning electron microscopy, and thermogravimetric
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
23. Chemometric Evaluation of Poly(3-hexylthiophene) Electrochemical Aging Path as a Function of Electrochemical Synthesis Variables
Conductive polymers are versatile materials that can be applied in many different technology fields, especially green energy. They have several advantages, such as easy synthesis, low density, and cost. However, its electric conduction property is also related to material aging with great loss of their characteristics, limiting their applicability. The in-de
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
24. A química analítica aplicada aos estudos de pigmentos rupestres: uma revisão
Instrumental advances have been employed in the study of archeological remains such as prehistoric rupestrians paintings with the objective of chemically characterizing them in order to reconstruct the cultural technologies of a prehistoric human group and/or to support conservation science studies. The analytical techniques most commonly used in archaeometr
Química Nova. Publicado em: 2022