Method Engineering
Mostrando 25-36 de 603 artigos, teses e dissertações.
-
25. An Extended Linear Discontinuous Method for One-group Fixed Source Discrete Ordinates Problems with Isotropic Scattering in Slab Geometry
RESUMO Atualmente, a obtenção de uma solução numérica precisa para problemas de fonte fixa em ordenadas discretas é relevante em muitas áreas da engenharia e das ciências. Neste trabalho, estendemos o método híbrido Elementos Finitos-Espectro Nodal (FEM-SGF), que foi originalmente desenvolvido para resolver problemas de autovalores de difusão, par
TEMA (São Carlos). Publicado em: 30/05/2019
-
26. Estimating design hydrographs at the basin scale: from event-based to continuous hydrological simulation
RESUMO Hidrogramas de projeto são amplamente utilizados em engenharia hidrológica. Típicas aplicações adotam métodos baseados em eventos (EB), utilizando modelos chuva-vazão para converter hietogramas de projeto em hidrogramas. Incertezas incluem a definição de condições antecedentes e a premissa de equivalência entre tempos de retorno da chuva
RBRH. Publicado em: 18/02/2019
-
27. Venturino: análise da variação de pressão em um tubo de Venturi utilizando Arduino e sensor de pressão
Resumo Geralmente os laboratórios didáticos das escolas de ensino médio e das instituições de ensino que ofertam graduações em Física e áreas correlatas não possuem equipamentos e/ou práticas experimentais sobre hidrodinâmica. Aplicações de relevância tecnológica tais como o tubo de Pitot ou o tubo de Venturi são estudados, geralmente, como
Rev. Bras. Ensino Fís.. Publicado em: 18/02/2019
-
28. XFEM Modelling in Multi-bolted Joints Using a Unified Bolt Preload
Abstract Multi-bolted joints are adopted and designed to provide efficient load transfer within assembled engineering parts. Bearing failure is favorable during design phase due to more progressive failure mode, however, ability of by-pass stress to be transferred to adjacent bolts in multi-bolted joints prone to catastrophic net-tension failure. Former appr
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
29. Effectiveness of track stiffness reduction in attenuation of metro induced vibrations received by historical buildings
Abstract Preservation of historical buildings is a main challenge in civil engineering field. One of the main concerns in this regard is metro induced vibration received by historical structures. There is a need to evaluate effectiveness of vibration mitigation measures in preservation of monumental buildings. The most widely used method of reducing metro vi
Lat. Am. j. solids struct.. Publicado em: 03/12/2018
-
30. Isolation and Identification of Novel IndigenousBacterial Strain as a Low Cost Pectinase Source
ABSTRACT The present study was concerned with the searching of novel bacterial cultures from different samples for the lab scale production of pectinase. Keeping in view the increasing demand of pectinase specially in Faisalabad, an industrial city of Pakistan, isolation of new hyper producer bacterial strains locally is an easy and cheap way of getting the
Braz. arch. biol. technol.. Publicado em: 14/11/2018
-
31. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
32. Calibration and evaluation of the Lemaitre damage model using axial- torsion fatigue tests on five engineering alloys
Abstract The Lemaitre damage model is evaluated using fatigue test data from five engineering alloys: 1045 steel, 16MnR steel, 7075-T651 Al alloy, extruded AZ61A Mg alloy, and extruded AZ31B Mg alloy. Tension-compression, torsion, proportional axial-torsion, and 90° out-of-phase axial-torsion loadings were investigated. The results show that the overall acc
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
33. A Model Updating Method for Plate Elements Using Particle Swarm Optimization (PSO), Modeling the Boundary Flexibility, Including Uncertainties on Material and Dimensional Properties
Abstract It is a well-known fact that, in a real engineering situation, fixtures are not ideally stiff, so numerical simulations using them are unlikely to present results that are consistent with the experimental ones. The present paper intends to describe a model updating methodology inserting translational and rotational springs in order to better represe
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
34. Evaluation of Fracture Toughness of Ultraviolet-Irradiated Polycarbonate Using the Essential Work of Fracture Method
The essential work of fracture (EWF) method provides useful parameters to characterize the fracture toughness of polymers exposed to degrading environments under conditions associated with plane-stress state of failure. Exposure of polymeric engineering materials to ultraviolet (UV) radiation may produce macromolecular changes that impair their fracture toug
Mat. Res.. Publicado em: 26/07/2018
-
35. Lecture capture and learner engagement strategies for industrial engineering distance education: results of a pilot program
Abstract Paper aims This study examines issues affecting the efficacy of online course delivery using lecture capture technology. This form of instruction presents particular challenges when classes are comprised of a mix of students who participate synchronously and asynchronously. Originality The study examines a pilot program focused on improving the
Prod.. Publicado em: 23/07/2018
-
36. Estimación de propiedades mecánicas de chapa de acero inoxidable 304L mediante ensayos SPT
ABSTRACT The mechanical characterization of materials by small specimen testing has growing interest in Structural Engineering. Small Punch Test (SPT) is applied to estimate mechanical properties of samples that can be extracted from components or structures without affecting service operation. In this paper the development of the test device is reported, co
Matéria (Rio J.). Publicado em: 19/07/2018