Calibration and evaluation of the Lemaitre damage model using axial- torsion fatigue tests on five engineering alloys
AUTOR(ES)
Castro, Fábio, Bemfica, Cainã
FONTE
Lat. Am. j. solids struct.
DATA DE PUBLICAÇÃO
22/10/2018
RESUMO
Abstract The Lemaitre damage model is evaluated using fatigue test data from five engineering alloys: 1045 steel, 16MnR steel, 7075-T651 Al alloy, extruded AZ61A Mg alloy, and extruded AZ31B Mg alloy. Tension-compression, torsion, proportional axial-torsion, and 90° out-of-phase axial-torsion loadings were investigated. The results show that the overall accuracy of the fatigue life estimates made by using the Lemaitre model is comparable to those obtained by fatigue models that require the definition of a loading cycle. A simple and effective method is described for determining the material constants of the Lemaitre model.
Documentos Relacionados
- Simple extension of Lemaitre's elastoplastic damage model to account for hydrolytic degradation
- A New Model to Determine the Dispersion of Fatigue Damage Evaluations
- Evaluation of a rat model of exercise-induced fatigue using treadmill running with progressively increasing load
- A comparison of two reciprocating instruments using bending stress and cyclic fatigue tests
- Effect of salt-water fog on fatigue crack nucleation of Al and Al-Li alloys
