Metallic Substrate
Mostrando 1-12 de 63 artigos, teses e dissertações.
-
1. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Radiation Efficiency of an Electrically Small Dual-band UHF Microstrip Patch Antenna Using Wheeler Cap Method
Abstract Determining the radiation efficiency of an antenna is a difficult task that becomes challenging when it is about electrically small antennas. This work investigates the applicability of the Wheeler cap method to measure the radiation efficiency of a UHF dual-band compact microstrip patch antenna. An overview of Wheeler method is presented. An adapta
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Morphology, Crystalline Structure and Chemical Composition Of MAO Treated Ti-15Zr-Mo Surfaces Enriched with Bioactive Ions
In this study, MAO treatment was used to enrich, with bioactive Ca, Mg and P atoms, as-casted and heat-treated Ti-15Zr-xMo (x = 0, 5, 10 and 15 wt%) alloys, for potential use as advanced metallic biomaterials. The chemical composition of the surface was evaluated by EDS and XPS measurements. The morphology and microstructure was analyzed by OM and SEM images
Mat. Res.. Publicado em: 09/12/2019
-
4. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. Produção e caracterização de revestimentos de ligas metálicas Cu-Sn em banho eletrolítico contendo glicina: ensaios preliminares
RESUMO Os problemas relacionados à corrosão são frequentes, podendo ocorrer nas mais variadas áreas, tais como, nas indústrias química, petroquímica, naval, de construção civil e automobilística, dentre outros setores produtivos. Portanto, métodos para prevenir a corrosão devem ser empregados para evitar a perda de materiais e o uso de revestimen
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Simulation and Design of a Bandpass Filter Based on Substrate Integrated E-Plane Waveguide
Abstract This paper presents a bandpass filter based on a substrate integrated E-plane waveguide (SIEW) structure for wireless applications, at X-band. The SIEW geometry allows the development of new horizontally polarized filter topologies, unlike filter structures based on substrate integrated waveguide (SIW), which present vertical polarization (perpendic
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
7. A Novel Fractal Multi-band Frequency Selective Surface
Abstract In this paper, a new multiband fractal frequency selective surface (MF-FSS) is proposed. The work presents a new fractal design methodology for FSSs with Swastika fractal patch elements. The proposed MF-FSS includes periodic arrays of metallic patches, printed on a single layer substrate. The structure parametric analysis is carried out in terms of
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
8. Fabricación de recubrimientos compuestos de Bioglass®/poli(ɛ-capro-lactona) obtenidos por co-deposición electroforética sobre acero inoxidable
ABSTRACT In this work two kinds of "soft coatings" were obtained by co-electrophoretic deposition technique (co-EPD). In all cases a bioglass was used as inorganic phase, and a commercial poly(ɛ-caprolactone), (PCLC), and an anionic synthesized PCL modified with maleic anhydride (PCLS) were used as organic phase. To ensure an adequate coating over the metal
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Efecto de la concentración del silano MTMO sobre la protección contra la corrosión de acero electrocincado
ABSTRACT Superficial pretreatments based on silanes are one of the prominent alternatives to replace chromates as temporary protectors from the action of aggressive environments to metallic substrates. The barrier effect afforded by the silane film makes porosity, thickness and film homogeneity important issues in the protective effect. In the present work,
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Laser Cladding of Fe-based Metallic Glass/MoS2 Self-lubricating Composites: Effect of Power and Scanning Speed
MoS2 powder has been used to form "self-lubricating" composite coatings, which are very useful to increase the lifetime of machines where liquid lubricants cannot be used. In this work, amorphous overspray powder of Fe60Cr8Nb8B24 (at%) alloy was mixed with 5wt.% MoS2 powder and it was used to produce single tracks on AISI 1020 steel substrates by laser cladd
Mat. Res.. Publicado em: 01/02/2018
-
11. Corrosion Resistance Evaluation of HVOF Produced Hydroxyapatite and TiO2-hydroxyapatite Coatings in Hanks' Solution
The electrochemical behavior of HVOF produced hydroxyapatite (HA) and 80HA-20TiO2 coatings were investigated using electrochemical techniques in natural aerated Hanks' solution in the presence and absence of bovine serum albumin (BSA) for 30 days. All samples presented open circuit potential oscillations, which were associated to the porous nature of the coa
Mat. Res.. Publicado em: 22/01/2018
-
12. Evaluation of the anticorrosion performance of peel garlic extract as corrosion inhibitor for ASTM 1020 carbon steel in acidic solution
ABSTRACT Metallic corrosion can be delayed using corrosion inhibitors. However, several industrial corrosion inhibitors are toxic and harmful to the environment and to the human health. In this context, in the last decades, research has been developed to investigate the performance of low toxicity corrosion inhibitors as green inhibitors obtained from vegeta
Matéria (Rio J.). Publicado em: 10/08/2017