Mesh Generation
Mostrando 1-12 de 43 artigos, teses e dissertações.
-
1. Two-dimensional beams in rectangular coordinates using the radial point interpolation method
Abstract The three-dimensional Theory of Elasticity equations lead to a complex solution for most problems in engineering. Therefore, the solutions are typically developed for reduced systems, usually symmetrical or two-dimensional. In this context, computational resources allow the reduction of these simplifications. The most recognized methods of algebraic
REM, Int. Eng. J.. Publicado em: 2020-03
-
2. Numerical Study on Response Characteristics of Solid Rocket Pintle Motor
ABSTRACT: Pintle technology is currently a versatile technology used in a solid rocket motor (SRM) to control the desired thrust by changing the nozzle throat area, while effectively controlling the chamber pressure at the same time. The sudden movement of the pintle can induce rapid changes in the flow field and the occurrence of pressure oscillations insid
J. Aerosp. Technol. Manag.. Publicado em: 26/08/2019
-
3. Application of an alternative mesh morphing method on the numerical modeling of oscillating wave surge converters
RESUMO Uma das tecnologias capazes de explorar a energia das ondas, baseada na captação das componentes horizontais do movimento destas, aliada a um sistema placa-pistão, vem experimentando um notável desenvolvimento ao longo dos últimos anos, tal dispositivo é conhecido como conversor oscilante por translação de ondas. Este possui um grande potencia
RBRH. Publicado em: 29/07/2019
-
4. Free Vibration Analysis of Functionally Graded Nanocomposite Beams on Elastic Foundation Using a Mesh-Free Method
Abstract The use of Carbon Nanotubes as the reinforcing constituent for polymer matrix composites in place of conventional fibers has led to the emergence of a new generation of advanced composite materials. In this paper, the free vibration of functionally graded nanocomposite beams on elastic foundations are studied. Three different types of Carbon Nanotub
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
5. Further Development and Application of High-Order Spectral Volume Methods for Compressible Flows
Abstract: The present paper investigates the high-order spectral finite volume method with emphasis on applicability aspects for compressible flows. The intent is to improve the understanding and implementation of numerical techniques related to high-order unstructured grid schemes. In that regard, a hierarchical moment limiter and high-order mesh capability
J. Aerosp. Technol. Manag.. Publicado em: 20/07/2017
-
6. Numerical methodology for analyses of tubular KK multiplanar steel joints
Abstract Herein is presented a numerical methodology for a static resistance analysis of symmetrically loaded multiplanar KK joints in circular hollow steel sections. This methodology addresses factors related to the simulation of KK joints such as the material properties, the boundary conditions, mesh generation and refinement, incremental load steps and fa
REM, Int. Eng. J.. Publicado em: 2017-06
-
7. Aerodynamics of Harmonically Oscillating Aerofoil at Low Reynolds Number
ABSTRACT: Two-dimensional flows over harmonically oscillating symmetrical aerofoil at reduced frequency of 0.1 were investigated for a Reynolds number of 135,000, with focus on the unsteady aerodynamic forces, pressure and vortex dynamics at post-stall angles of attack. Numerical simulations using ANSYS® FLUENT CFD solver, validated by wind tunnel experimen
J. Aerosp. Technol. Manag.. Publicado em: 2017-03
-
8. One-Stage Power Turbine Preliminary Design and Analysis
ABSTRACT: Design and development of gas turbine components are a complex multidisciplinary process. At the beginning of the power class definition and engine configuration it is necessary to conduct a market study. The results obtained are used in gas turbine thermodynamic cycle calculations and analysis in order to define the gas turbine design point. Sever
J. Aerosp. Technol. Manag.. Publicado em: 2015-06
-
9. Simulação da propagação de ondas ultrassônicas longitudinais em materiais estruturais aeroespaciais / Simulating the propagation of longitudinal ultrasonic waves in aerospace structural materials
The use of composite materials in the aerospace industry is increasing due to its low ratio between density and mechanical strength. To perform non-destructive testing using ultrasound, it is necessary to know the sound velocity in these materials. It is not always possible to manufacture physical prototypes during the development of a project because of tim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
10. TÃcnicas para geraÃÃo de malhas de quadrilÃteros convexos e sua aplicaÃÃo em reservatÃrios naturais / Techniques for generating convex quadrilateral meshes and its application in natural reservoirs
Esta dissertaÃÃo descreve quatro mÃtodos implementados para realizar uma quadrilaterizaÃÃo convexa do espaÃo bidimensional que pode conter linhas poligonais ou buracos. Dois destes mÃtodos, ponto mÃdio e ortoquad, utilizam de elementos guia, o baricentro de uma regiÃo ou o locus de cÃrculos mÃximos tangentes e internos a geometria, para produzir u
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/02/2011
-
11. A high-fault-coverage approach for the test of data, control, and handshake interconnects in mesh networks-on-chip
A novel strategy for detecting interconnect faults between distinct channels in networks-on-chip is proposed. Short faults between distinct channels in the data, control, and communication handshake wires are considered in a cost-effective test sequence for mesh NoC topologies based on XY routing.
Publicado em: 2011
-
12. Simulação computacional da interação fluido-estrutura em bombas de cavidades progressivas
O sistema de bombeamento por cavidades progressivas está sendo cada vez mais empregado na indústria do petróleo, devido à sua capacidade de elevação de óleos altamente viscosos ou de fluidos com grandes concentrações de areia ou outras partículas sólidas. Uma Bomba de Cavidades Progressivas (BCP) é composta, basicamente, por um rotor - uma peça
Publicado em: 2010