Mechanized Operations
Mostrando 1-12 de 23 artigos, teses e dissertações.
-
1. COST OF AERIAL AND GROUND SPRAYINGS AND TECHNOLOGICAL REPLACEMENT POINT: A CASE STUDY IN THE REGION OF MINEIROS, GO, BRAZIL
ABSTRACT One of the main costs in agriculture is related to mechanized operations, which, in turn, are associated with the capital invested in machinery and equipment, the scale of production, and the operating efficiency. Thus, the choice of technology to carry out these operations must take these factors into account to minimize the production cost. In thi
Eng. Agríc.. Publicado em: 2021-05
-
2. Modeling residual biomass from mechanized wood harvesting with data measured by forest harvester
Abstract: The lack of accurate models for estimating residual biomass in wood harvesting operations results in underutilization of this co-product by forestry companies. Due to the lack of this information, forestry operations planning, such as chipping and transport logistics, are influenced, with a consequent increase in costs. Thereby, the aim of this stu
An. Acad. Bras. Ciênc.. Publicado em: 02/12/2019
-
3. Energy balance and CO2 emission in mechanized biomass harvesting in pine stands under thinning
Abstract: Biomass is an important component of the Brazilian energy matrix, with a potential contribution of co-products from thinned forests. The aim of this work was to evaluate the energy balance and CO2 potential emission in mechanized biomass harvesting operations in Pinus taeda stands at 9 and 10 years-old and under thinning, searching to support the
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
4. REPETITIVE MOTION AND POSTURAL ANALYSIS OF MACHINE OPERATORS IN MECHANIZED WOOD HARVESTING OPERATIONS
ABSTRACT The objective of this study was to evaluate operators’ posture and repetitive motions in the mechanized wood harvesting operations, aiming comfort, safety, and health of forest operators. The study was carried out in the clearcutting of pine stands located in Paraná State, Brazil. Data were obtained in tree cutting operations with feller buncher
CERNE. Publicado em: 09/09/2019
-
5. Quality of mechanical peanut sowing and digging using autopilot
RESUMO O direcionamento automático de máquinas agrícolas via sinal GNSS (Global Navigation Satellite System) tem sido adotado cada vez mais pela comunidade agrícola na última década. Produtores de amendoim estão adotando tal tecnologia a fim de melhorar o paralelismo das operações face às dificuldades principalmente encontradas no arranquio mecaniz
Rev. bras. eng. agríc. ambient.. Publicado em: 15/07/2019
-
6. TIME AVAILABLE FOR SPRAYING AND MECHANIZED SOWING IN THE NORTHEAST OF THE STATE OF MATO GROSSO DO SUL AND SOUTH OF GOIÁS
ABSTRACT The sizing of mechanized agricultural systems depends on the soil and climatic conditions, the crop and the work regime. The aim of this study was to determine the probabilities of time available during an agricultural year for mechanized spraying and sowing in the northeast region of the State of Mato Grosso do Sul and south of Goiás. The meteorol
Eng. Agríc.. Publicado em: 2018-06
-
7. Failure mode and effect analysis (FMEA) in mechanized harvest of sugarcane billets
ABSTRACT The quality control is used for the evaluation of processes and products, and it is important to detect and reduce variability and in operations management can be applied in mechanized harvesting of sugarcane billets. In this sense, this study aimed to identify critical quality indicators and, if necessary, to develop a continuous improvement plan f
Eng. Agríc.. Publicado em: 2018-01
-
8. MECHANIZED AND INDIVIDUALIZED APPLICATION OF N-P-K IN COMBINED OPERATIONS IN SUGARCANE
ABSTRACT: A new concept of fertilizer machine is under development and shows as differential individually fertilizer application, that is sources of N, P and K are applied separately for the purpose of improving the distribution efficiency of the quantities applied. The aim was to compare the quality of the individualized mechanized distribution of N, P and
Eng. Agríc.. Publicado em: 2017-08
-
9. Least limiting water range for oil palm production in Amazon region, Brazil
ABSTRACT In areas cultivated with oil palm, typically mechanized field operations using heavy vehicles may negatively affect soil physical properties and productivity. The aim of this study was to evaluate soil physical quality in an area cultivated with oil palm by monitoring the temporal variation of the soil water content and relating it to the critical l
Sci. agric. (Piracicaba, Braz.). Publicado em: 2017-04
-
10. ESTIMATION OF FUEL CONSUMPTION IN AGRICULTURAL MECHANIZED OPERATIONS USING ARTIFICIAL NEURAL NETWORKS
ABSTRACT This study aimed to develop artificial neural networks for the estimation of tractor fuel consumption during soil preparation, according to the adopted system. The multilayer perceptron network was chosen. As input data: the soil mechanical penetration resistance, the mobilized area by implements, the working gear and the tractor engine speed. The n
Eng. Agríc.. Publicado em: 2017-02
-
11. Pine Harvest Impact on Soil Structure of a Dystric Cambisol (Humic)
ABSTRACT Traffic of heavy machinery at harvest and log extraction causes structural degradation of the soil, but studies on the effects of forest harvesting on soils with high organic matter content and exchangeable Al are scarce. The objective of this study was to evaluate the effect of mechanized forest harvesting operations on a Dystric Cambisol (Humic) w
Rev. Bras. Ciênc. Solo. Publicado em: 23/06/2016
-
12. Mechanized methods for harvesting residual biomass from Mediterranean fruit tree cultivations
This study evaluates the technology and work systems used in order to harvest residual biomass from pruning in the specific conditions of Mediterranean fruit orchards (narrow distances between crop-rows). Harvesting has been divided into several types of operations - pruning, biomass alignment between crop tracks, biomass concentration in piles, chipping and
Scientia Agricola. Publicado em: 2012-06