Energy balance and CO2 emission in mechanized biomass harvesting in pine stands under thinning

AUTOR(ES)
FONTE

An. Acad. Bras. Ciênc.

DATA DE PUBLICAÇÃO

25/11/2019

RESUMO

Abstract: Biomass is an important component of the Brazilian energy matrix, with a potential contribution of co-products from thinned forests. The aim of this work was to evaluate the energy balance and CO2 potential emission in mechanized biomass harvesting operations in Pinus taeda stands at 9 and 10 years-old and under thinning, searching to support the use of co-product biomass from thinning as a renewable energy source. Thinning was carried out through cut-to-length harvesting method, in which large logs for sawmill and small logs for energy were produced. In addition, tops, needles, barks, and branches were considered as co-products. The balance between consumed energy and emitted CO2 by machines for thinning in relationship to the energy and CO2 in thinned biomass was estimated. Thus, dry matter, energy potential, and CO2 potential emission were evaluated and compared considering thinning stand ages as treatments. Mechanized thinning consumes a large energy and produces CO2, however, the energy consumed by machines is lower than 1% of the estimated energy potential in thinned biomass, while the CO2 emission is lower than 0.5% of the biomass. Therefore, the use of co-product biomass of thinning is an important way to mitigate greenhouse gas emission.

Documentos Relacionados