Mechanical Tests
Mostrando 1-12 de 1122 artigos, teses e dissertações.
-
1. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
2. SYNTHESIS OF TOLUENE DIISOCYANATE URETHANE PREPOLYMER USING CASTOR OIL AND EVALUATION OF MECHANICAL PROPERTIES
This research is the synthesis of urethane prepolymer cast elastomer which had been produced using toluene diisocyanate and castor oil to replace the synthetic polyol, from petroleum origin, and the evaluation of mechanical properties of the polyurethane. The focus was to replace polyol from petroleum to vegetable material looking for renewable resources. Th
Química Nova. Publicado em: 2022
-
3. Finite element computational development for thermo-mechanical analysis of plane steel structures exposed to fire
Abstract This article presents a numerical formulation based on finite element procedures for application in nonlinear thermo-mechanical analyses of steel planar structures under fire condition. The mechanical properties of structural elements degrade when subjected to high temperatures, resulting in significant reductions in strength and stiffness. Under th
REM - International Engineering Journal. Publicado em: 2022
-
4. BIODEGRADABLE SODIUM CARBOXYMETHYL CELLULOSE MEMBRANES CONTAINING MELALEUCA ESSENTIAL OILS FOR WOUND CARE MATERIAL
NaCMC is a biocompatible polymer that can be crosslinked with citric acid to form a gel matrix. Melaleuca oils have antimicrobial and anti-inflammatory properties with potential for wound healing. The goal of this work was to investigate the characteristics of NaCMC-Melaleuca oils gels. The gels were characterized by FTIR, TGA, mechanical analysis, and in vi
Química Nova. Publicado em: 2022
-
5. Percutaneous tracheostomy in COVID-19 patients: a new apneic approach
Abstract Background: Percutaneous dilation tracheostomy is an aerosol-generating procedure carrying a documented infectious risk during respiratory virus pandemics. For this reason, during the COVID-19 outbreak, surgical tracheostomy was preferred to the percutaneous one, despite the technique related complications increased risk. Methods: We describe a ne
Brazilian Journal of Anesthesiology. Publicado em: 2022
-
6. Effect of sintering temperature on mechanical and bioactivity properties of bioactive glass and cordierite composite
Abstract In this study, a composite of bioactive glass (BG) and cordierite (BG-cord) was proposed to increase the strength and bioactivity of BG. Both BG and cordierite were separately synthesized with the method of glass melting, then, they were used to fabricate BG-cord with a variation of sintering temperature (600 to 1000 °C). The highest diametral tens
Cerâmica. Publicado em: 2022
-
7. Evaluation of the self-healing capacity of ceramics produced with alumina and silicon carbide
Abstract The self-healing capacity of a ceramic material produced by uniaxial pressing with alumina (Al2O3), silicon carbide (SiC), and magnesium oxide (MgO) was evaluated. To assess self-healing, a discontinuity was generated on the surface of the specimens. The healing time in the oven, at a temperature of 1000 ºC, was 1, 30, and 60 min. The specimens wer
Cerâmica. Publicado em: 2022
-
8. Evaluation of moisture content variation on strength and stiffness properties of Cedrella sp. wood specie
Abstract In order to evaluate the influence of moisture content on wood physical and mechanical properties, the present research analyzed the influence of moisture content variation on Cedrella sp. on 12 strength and stiffness properties, considering 12% moisture content up to Fiber Saturation Point (FSP) were considered. Brazilian Standard consider a correc
REM - International Engineering Journal. Publicado em: 2022
-
9. Soil stabilization with lime for erosion control in solar plants
Abstract The installation of solar parks requires extensive areas and results in soil erosion in many cases. One suitable solution is applying lime to improve soil characteristics, such as mechanical strength, stability, workability, durability, and internal and surface erosion resistance. This soil treatment is of particular importance when dealing with hyd
REM, Int. Eng. J.. Publicado em: 2021-09
-
10. Polyacrylamides in reverse cationic iron ore flotation: bench scale study
Abstract A bench scale study was carried out to investigate the influence of polyacrylamides as co-depressant in a blend with starch depressant on the reverse cationic iron ore flotation. The results indicated that the use of polyacrylamides as dual function polymer should be an alternative to improve the flotation process. These polymers act as a depressant
REM, Int. Eng. J.. Publicado em: 2021-09
-
11. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
12. Hymenaea parvifolia Huber: dormancy breaking, morphology of fruit, seed and seedling
ABSTRACT The successful use of native species in conservation actions depends on basic knowledge of their biology, beginning with the identification of regenerating individuals in the field, up to the behavior and development of the species from the early stages of germination. Moreover, seed propagation and germination may be limited by the occurrence of do
Rev. Ceres. Publicado em: 2021-04