Mechanical Tests
Mostrando 13-24 de 1122 artigos, teses e dissertações.
-
13. Characterization of sugarcane bagasse ash (SBA) and its evaluation for use in alkali-activated slag mixtures
Abstract This work proposed to incorporate the sugarcane bagasse ash (SBA) with a high content of organic matter (loss on ignition of 35.87%) in alkali-activated mixtures with blast furnace slag. After grinding SBA, replacement ratios of 10%, 20%, and 30% of the ground ash were used for the flowability evaluation. The mixtures containing 20% and 30% showed a
Cerâmica. Publicado em: 2021-03
-
14. Maximization of the use of casting sand residue in the production of fired ceramic bricks
Abstract In this study, a red ceramic was developed with the addition of sand residue from deburring and finishing processing of cast iron molds, replacing a variable fraction of the clay. The formulated masses were shaped by pressing and firing at different temperatures (850, 900 and 1000 ºC) at a heating rate of 180 ºC/h and 2-hour level. The bodies were
REM, Int. Eng. J.. Publicado em: 2020-09
-
15. The Covid-19 pandemic seen from the frontline
ABSTRACT COVID-19 disease caused by infection with the SARS-CoV-2 virus produces respiratory symptoms, predominantly of the upper airways, which can progress to pneumonia after 7 days with persistent fever, cough and dyspnea, and even develop a syndrome of acute respiratory distress (ARDS), multi-organ failure and death. Since COVID-19 disease was declared b
Int. braz j urol.. Publicado em: 2020-07
-
16. STUDY OF THERMAL EXPANSION AND COMPRESSION STRENGTH OF THREE WOOD SPECIES FROM PLANTATIONS
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
CERNE. Publicado em: 2020-06
-
17. Inflammatory segmental vitiligo during oral isotretinoin use: a casual association?,
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
An. Bras. Dermatol.. Publicado em: 2020-06
-
18. CONSTRUCTION AND TESTING OF GLUED LAMINATED TIMBER FRAMES FOR USE IN LAYING POULTRY HOUSES
ABSTRACT This study aimed to present a solution in glued laminated timber to replace frame structures built in reinforced concrete and metallic structure, which are common in agricultural buildings in western Paraná such as those destined to laying poultry house building by agricultural cooperatives. Structural behavior of frames build from Araucaria angust
Eng. Agríc.. Publicado em: 2020-04
-
19. INFLUENCE OF FATIGUE ON BENDING OF Pinus caribaea WOOD
ABSTRACT This research aimed to evaluate the effect of the number of fatigue cycles (NC, 0 – reference, 450, 4500, 45000, and 90000) for frequencies (Fr) of oscillation equal to 0.5 and 1.0 Hz on the modulus of elasticity (Em) and operating stress (σm) in the static bending of Pinus caribaea wood. Em and σm were determined taking into account three speci
Eng. Agríc.. Publicado em: 2020-04
-
20. Effect of titanium and nitrogen inoculation on the microstructure, mechanical properties and abrasive wear resistance of Hadfield Steels
Abstract The effect of titanium and nitrogen addition on Hadfield steels was investigated. In order to do this, two grades of steels were produced in terms of titanium and nitrogen addition. The final samples had their microstructure characterized and their mechanical properties were evaluated by uniaxial tensile and Charpy impact tests. Furthermore, the wea
REM, Int. Eng. J.. Publicado em: 2020-03
-
21. Geomechanical characterization of carbonates of the Sete Lagoas Formation (Bambuí Group)
Abstract The geomechanical properties of rock masses must be identified to assess their quality and employability; however, the methodologies may differ depending on the lithotype and analytical purposes. The present study aimed to estimate the not-well-known physical-mechanical properties of three types of carbonate rocks (calcarenite, calcilutite, and marb
REM, Int. Eng. J.. Publicado em: 2020-03
-
22. Bioprosthesis versus Mechanical Valve Heart Prosthesis: Assessment of Quality of Life
Abstract Background: The aim of this study was to evaluate the QoL of patients undergoing heart valve replacement using the SF-36 questionnaire, compare it between patients with mechanical prosthesis and patients with bioprosthesis, and correlate the results with sociodemographic variables. Objective: To assess the QoL of patients undergoing heart valve re
Int. J. Cardiovasc. Sci.. Publicado em: 2020-02
-
23. Prediction of Mechanical and Functional Features of Aged Rubber Composites Based on BR/SBR; Structure-Properties Correlation
In this study, the structure-properties relationship between the thermal factors of BR/SBR blends [normalize factor h BR 100 hBR 100 − hBR x, and the maximum peak temperature difference of thermal decomposition of BR and SBR Δ T max = T max BR − T max SBR ] with their aging time (1 to 40 days) was demonstrated using DTG profile of uncu
Mat. Res.. Publicado em: 20/01/2020
-
24. Post-elastic Deformation Characteristics of Hybrid Fibre Reinforced Concrete Composites
Abstract The present study was focused on evaluating the strength and failure properties of hybrid micro-fibre concretes containing micro brass and steel fibre additions. Experimental tests were conducted on different hybrid fibre concretes containing aligned fibres in the direction of beam axis and the relative mechanical performance was compared to randoml
Lat. Am. j. solids struct.. Publicado em: 10/01/2020