Magnetic Losses
Mostrando 1-12 de 49 artigos, teses e dissertações.
-
1. Radially Periodic Metasurface Lenses for Magnetic Field Collimation in Resonant Wireless Power Transfer Applications
Abstract In this paper, a new procedure and topology of magnetic metasurface lens are proposed for improving the performance of Resonant Wireless Power Transfer systems. Firstly, three subwave-length unit cells are optimized in order to get negative magnetic permeability in the same frequency, each one with a different refractive index, and they are experime
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Optimization Techniques and Mathematical Modeling Applied to Reluctance Motors
Abstract The present work aims at the application of different optimization strategies in the electromagnetic analysis of the Variable Reluctance Motor (VRM) through Finite Element (FE) simulation. Two case studies are investigated: the first one aims to optimize the geometry and electrical characteristics of windings of a single-phase VRM 6/6, minimizing co
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Evaluation of Mass Loss in Different Stages of Printed Circuit Boards Recycling Employed in Temperature Controllers
The aim of this work was to evaluate mass loss in each stage of the recycling process for metal recovery from PCBs of controllers and temperature indicators of cold chambers. The stages of process consists of grinding, particle size classification, magnetic and electrostatic separation. It was analyzed 13 kg of PCBs. These PCBs were crushed and ground. The g
Mat. Res.. Publicado em: 02/12/2019
-
4. Comparison and Combination of Techniques for Determining the Parameters of a Magnetic Hysteresis Model
Abstract The Jiles-Atherton scalar hysteresis model presents five parameters used to represent the material tested and used to calculate the magnetic losses. This article presents a comparative analysis of the performance of two methods of identifying these parameters. In the first method, the equations of Jiles-Atherton were assembled into a single non-line
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
5. Magnetic Aging, Anomalous and Hysteresis Losses
In this study the magnetic aging effect on anomalous and hysteresis loss was investigated, as well as its effect on domain morphology. For this purpose, non-oriented fully processed electrical steel with 2.3 wt.%Si - 79 ppm C and non-oriented semi-processed electrical steel annealed at 750 °C for 5 hours with 0.4 wt.%Si - 340 ppm C were aged at 150 °C. The
Mat. Res.. Publicado em: 21/03/2019
-
6. Effect of Cross-Rolling on Microstructure, Texture and Magnetic Properties of Non-Oriented Electrical Steels
Hot rolled non-oriented electrical steel samples were subjected to cold cross-rolling of 80 % reduction in thickness. The cross-rolled samples were then annealed at 650, 750 and 850 ºC for 1 hr, 2 hrs and 4 hrs respectively. The role of cross-rolling on microstructure, texture and magnetic properties of the samples after annealing has been investigated. Two
Mat. Res.. Publicado em: 16/12/2016
-
7. Properties of NGO 3% Silicon Steel Asymmetrically Cold Rolled
The effects of asymmetric and conventional deformations and annealing on the microstructure of non-grain-oriented (NGO) 3 wt% silicon steel were analyzed by x-ray diffraction, optical microscopy and magnetometry. The results suggest that pure asymmetric rolling tends to lessen magnetic losses. However, intermediate annealing resulted in lower planar anisotro
Mat. Res.. Publicado em: 23/10/2015
-
8. An analysis on electric and magnetic behaviour on an induction planar actuator
The induction planar actuator, i.e. IPA, proposed in this study presents an electromagnetic structure formed by a static ferromagnetic core with an aluminium plate that corresponds to the secondary, and a mover, also called primary. The latter comprehends two three-phase windings, mounted in an armature core, which are orthogonal to each other. When they are
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-06
-
9. ANALISE E PROJETO DO CONVERSOR BUCK INTERCALADO PARA ALIMENTAÇÃO DE LÂMPADAS DE DESCARGA EM ALTA PRESSÃO DE ALTA POTÊNCIA / INTERLEAVED BUCK CONVERTER ANALYSIS FOR HIGH POWER HIGH INTENSITY DISCHARGE LAMPS SUPPLYING
This work presents a detailed analysis about the interleaved buck converter applied to electronic ballasts to supply high power HID lamps, assuming the input voltage as a PFC stage output. As the output capacitor has a maximum value to be applied in parallel with the lamp, parallel operated converters are a suitable choice because the output current ripple c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
10. Performance of single wire earth return transformers with amorphous alloy core in a rural electric energy distribution system
In this paper are presented some considerations about the performance of single wire earth return amorphous alloy core transformers in comparison with conventional silicon steel sheets cores transformers used in rural electric energy distribution network. It has been recognized that amorphous metal core transformers improve electrical power distribution effi
Mat. Res.. Publicado em: 08/05/2012
-
11. Caracterização de ligas magnéticas sinterizadas para aplicação em núcleos de máquinas elétricas rotativas
The purpose of this work is to study the properties of ferromagnetic alloys obtained by Powder Metallurgy to construct cores of Rotary Electric Machines, usually mounted on rolled steel sheets. To perform these activities, iron power and their alloys obtained by a mixture with different percentages of phosphorus (1, 2 and 3%), silicon (1, 3 and 5%) and nicke
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
12. InfluÃncia da RecristalizaÃÃo no Comportamento da Textura CristalogrÃfica e nas Perdas MagnÃticas por Histerese de um AÃo ElÃtrico de GrÃo nÃo Orientado (GNO) / Influence of recrystallization on the evolution of crystallographic texture and hysteresis magnetic losses by in non-oriented grain electrical steel
AÃos elÃtricos de grÃo nÃo orientado sÃo amplamente utilizados na fabricaÃÃo de nÃcleos para motores elÃtricos, sendo o desempenho destes equipamentos afetado pela textura cristalogrÃfica presente nesses materiais. JÃ o tamanho de grÃo interfere consideravelmente nas perdas magnÃticas. A textura cristalogrÃfica e o tamanho de grÃo sÃo extrema
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011