Lightweight Aggregate
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Technological properties of a self-bloating clay and expanded-clay aggregate for the production of lightweight concrete
Abstract The global interest in an increasingly sustainable economy, with a reduction in the consumption of raw materials and energy, can be supported by the growth in the use of lightweight concrete (LC) produced with expanded-clay aggregates (EA). The main qualities of natural self-bloating clay for the production of EA were studied, analyzing the paramete
Cerâmica. Publicado em: 2023
-
2. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
RESUMO Cenosfera é um sub-produto da combustão do carvão que apresenta interessantes propriedades para ser usado na produção de materiais cimentícios, tais como estrutura oca, baixa densidade, baixa térmica condutividade e notável estabilidade térmica. Além disso, ela mostra reatividade pozolânica na cura térmica. Entretanto, o potencial da cenos
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Application of Support Vector Machine and Finite Element Method to predict the mechanical properties of concrete
Abstract Compressive strength and Young’s modulus are the main properties used in the design of concrete structures. They are responsible for the cost, safety and dimensioning of the structure, and are generally measured in expensive and time-demanding tests. This fact encourages researches for fast and cost-effective methods to investigate the concrete’
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
4. Effects of pre-wetting aggregate on the properties of mortars made with recycled concrete and lightweight aggregates
RESUMO Este artigo buscou verificar a substituição parcial do agregado natural, areia (NA) por agregado de concreto reciclado (RCA) ou agregado leve (LWA) em argamassas, sob a hipótese que agregados pré-molhados produziriam melhoras nas propriedades da argamassa. Para isso, avaliou-se as propriedades das argamassas no estado fresco, como massa específic
Matéria (Rio J.). Publicado em: 10/06/2019
-
5. Produção de agregado sintético de argila com reaproveitamento de resíduo de vidro
RESUMO É objetivo da construção civil, reduzir o peso das estruturas e consequentemente os custos com as fundações. A substituição de britas por agregados leves é a alternativa mais utilizada. No entanto, sobretudo no Brasil, só existe uma única fábrica de agregados leves localizada em São Paulo, sendo oportuna a pesquisa de matériasprimas para
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Experimental Investigation on Self-Compacting Self-Curing Concrete Incorporated with the Light Weight Aggregates
ABSTRACT Self-Compacting Concrete (SCC) flows around obstructions by its self-weight to fill entirely and self-consolidate (without any need for vibration), without any part of disconnection and chunking. The eradication of the need for consolidation leads to better quality concrete and substantial improvement of running conditions. The fresh state of SCC mi
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
7. Agregado leve de argila calcinada para uso em concreto estrutural: viabilidade de cerâmica vermelha do Estado de São Paulo / Calcined clay lightweight aggregate for use in structural concrete: viability of the red ceramic from the state of São Paulo
Este trabalho tem por objetivo o estudo da viabilidade da utilização de cerâmica vermelha para a confecção de agregados leves de argila calcinada para utilização em concretos estruturais. Inicialmente, foram coletadas amostras de solo de cinco diferentes empresas produtoras de cerâmica vermelha do estado de São Paulo. As massas cerâmicas foram cara
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/11/2012
-
8. Influence of surface roughness and the use of new types of fiber in bearing pads of cement-based material for precast concrete connections / Influência da rugosidade superficial e o uso de novos tipos de fibras em almofadas de argamassa para ligações de concreto pré-moldado
This paper presents the study of a mortar modified to be used as a bearing pad connections between precast concrete elements. This mortar is composed of cement and sand, with the addition of styrene-butadiene latex (SB), lightweight aggregate (vermiculite) and short fibers (polypropylene, glass and PVA). Previous research showed that this composite presents
Publicado em: 2010
-
9. Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo
This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and
Publicado em: 2009
-
10. Avaliação do desempenho mecânico de protótipo executado com blocos EVA: estudo de impactos horizontais em alvenarias e suas interações com outros elementos da construção.
The utilization of residues of the footwears industry, especially E.V.A. residues(Ethilene Vinil Acetate) in the Civil Construction Industry has been the focus of the researches. It is known that such residues can be used as artificial aggregates instead of natural aggregates in the production of lightweight cement composites. The focus of this research is t
Publicado em: 2008
-
11. Influência de parâmetros microestruturais na durabilidade de concretos leves produzidos com argila expandida
The low relation strength-weight of concrete, when compared to steel, constitutes a disadvantage of that material when applied in the construction. To improve this relation we can reduce the specific gravity of the concrete or increase its strength. Nowadays,lightweight concrete has been used in a larger scale for structural purposes and for reduction of the
Publicado em: 2007
-
12. APPLICATION OF ALUMINUM SLAG INCORPORATED IN LIGTHWEIGHT AGGREGATE / "Utilização da escória de alumínio na fabricação de argila expandida"
O presente trabalho estuda a viabilidade de utilização da escória de alumínio, que é um rejeito da indústria recicladora de alumínio, atualmente sem valor agregado, como elemento integrante na fabricação de argila expandida. A argila expandida é produzida a partir de argilas que produzam expansão piroplástica, que são utilizadas como agregado le
Publicado em: 2006