Produção de agregado sintético de argila com reaproveitamento de resíduo de vidro

AUTOR(ES)
FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

20/05/2019

RESUMO

RESUMO É objetivo da construção civil, reduzir o peso das estruturas e consequentemente os custos com as fundações. A substituição de britas por agregados leves é a alternativa mais utilizada. No entanto, sobretudo no Brasil, só existe uma única fábrica de agregados leves localizada em São Paulo, sendo oportuna a pesquisa de matériasprimas para disseminação da produção de agregado em outras regiões do Brasil. Proporcionalmente, esse tipo de segmento valoriza o reaproveitamento de resíduos de diversos segmentos. Neste trabalho foi produzido um agregado sintético de argila calcinada com a incorporação de resíduo de vidro de embalagem à base de SiO2, Na2O e CaO, com o intuito de substituir britas para uso em concreto. Foram testadas incorporações de 0 a 20% de vidro e as massas foram caracterizadas por índice de plasticidade, DRX, FRX, DTA/TG, capacidade de troca de cátions e massa específica real. Os corpos de prova foram produzidos por prensagem axial a uma pressão de 30 MPa, em formato cilíndrico com 20 mm de diâmetro e altura de 15 mm. Após queima, os corpos de prova foram caracterizados em ensaios de absorção de água, densidade aparente e resistência mecânica à compressão. Foi observado que à medida que o resíduo de vidro foi incorporado nas formulações, as misturas apresentaram resistência mecânica cada vez maior e absorção de água cada vez menor, devido a incorporação dos óxidos fundentes que favoreceram a formação de fase liquida. No entanto, quanto se atingiu o limite de incorporação de 20% e queima a 1000 ºC, foi observado um aumento de volume devido a maior formação de fase líquida que preencheu os espaços vazios dificultando a saída dos gases que ficaram aprisionados. Concluiu-se que o resíduo de vidro quando incorporado na argila em estudo pode ser utilizada de duas formas: como fundente para acréscimo da resistência mecânica e massa especifica aparente e redução da absorção de água ou ainda com a função de redução da densidade propriedade que é fundamental para produção de agregados leves.ABSTRACT it is the objective of the civil construction, to reduce the weight of the structures and consequently the costs with the foundations. The replacement of brittle by light aggregates is the most commonly used alternative. However, especially in Brazil, there is only a single light aggregate plant located in São Paulo, and the timing of research on raw materials for the dissemination of aggregate production in other regions of Brazil. Proportionally, this type of segment values the reuse of waste from several segments. In this work a synthetic aggregate of calcined clay was produced with the incorporation of glass residue of packing with SiO2, Na2O and CaO base, in order to replace brittle for concrete use. Incorporations of 0 to 20% of glass were tested and the masses were characterized by plasticity index, XRD, FRX, DTA / TG, cation exchange capacity and actual specific mass. The specimens were produced by axial pressing at a pressure of 30 MPa, in a cylindrical format with a diameter of 20 mm and a height of 15 mm. After burning, the specimens were characterized in tests of water absorption, apparent density and mechanical resistance to compression. It was observed that as the glass residue was incorporated into the formulations, the mixtures presented increasing mechanical strength and lower water absorption due to the incorporation of the fluxing oxides that favored the formation of liquid phase. However, when the 20% incorporation limit was reached and the burn at 1000 oC, a volume increase was observed due to the higher liquid phase formation that filled the void spaces, making it difficult to escape the gases trapped. It was concluded that the glass residue when incorporated in the clay under study can be used in two ways: as a flux for addition of mechanical resistance and apparent specific mass and reduction of water absorption or with the function of reducing the property density that is fundamental for the production of lightweight aggregate.

Documentos Relacionados