Hydraulic Turbines
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Vibration control device for steel tubular towers of Horizontal Axis Wind Turbines
Abstract This paper presents and discusses the design of a vibration control device for a 120 m high steel tubular tower of onshore Horizontal Axis Wind Turbine (HAWT). The tower is modeled using beam (own code), and shell and solid finite elements (via ANSYS). The Dynamic Vibration Absorber (DVA) is designed to be attached to the tower top, aiming to analyz
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
2. Microstructure and Mechanical Properties of ASTM A743 CA6NM Steel Welded by FCAW Process
CA6NM steel is widely used in the manufacture of hydraulic turbines metallic parts, due to its resistance to corrosion and cavitation damage, combined with good weldability and fatigue properties. However, welding of this type of steel is complex and to ensure a minimum residual stress after welding it is necessary perform a post welding heat treatment (PWHT
Mat. Res.. Publicado em: 21/09/2017
-
3. Desenvolvimento de um modelo termohidrodinâmico para análise em mancais segmentados / Development of a thermohydrodynamic model for analysis in tilting pad journal bearings
Este trabalho tem por objetivo analisar o comportamento termohidrodinâmico de mancais hidrodinâmicos segmentados e avaliar a influência da temperatura nas características dinâmicas (coeficiente equivalente de rigidez e de amortecimento) desses mancais. Por esse motivo, foi desenvolvido um modelo termohidrodinâmico para análise em mancais segmentados,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/07/2012
-
4. Estudo experimental de uma bomba operando como turbina para acionamento de bombas centrífugas submersas / Experimental study of a pump as turbine to drive centrifugal submersible pumps
O método de elevação artificial através do bombeio centrífugo submerso (BCS) é amplamente conhecido na produção de petróleo. Uma alternativa a este método é o hydraulic submersible pump (HSP) que consiste de uma bomba submersa acoplada ao mesmo eixo de uma turbina hidráulica, que é acionada através do fluido a elevada pressão fornecido por uma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
5. Technical regulation to obtain better efficiency in the mechanization of small power plant in Brazil / Regulação técnica para se obter melhor eficiência na motorização de pequenas centrais hidrelétricas no Brasil
O propósito deste estudo é discutir um eventual aumento na produção de energia elétrica que é definida para as pequenas centrais hidrelétricas (PCH), tornando a escolha do tipo de turbina uma ferramenta para ampliar a oferta de energia de um mesmo aproveitamento hidrelétrico. O trabalho está voltado para as chamadas baixas quedas dágua e destaca es
Publicado em: 2009
-
6. Modificação técnica e conceitual no sistema de segurança dos geradores e condutos forçados ns 1 e 2 da usina Henry Borden
This study aims to propose a technical and conceptual modification in the safety system of generators and forced ducts n 1 and 2 of Henry Borden hydroelectric power plant, in Cubatão - Sao Paulo, with the main objective of reducing the water hammer in the forced ducts. This work starts with a concise review on hydraulic turbines, with emphasis on the most c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/03/2008
-
7. Minimum pressure coefficient criterion applied in axial-flow hydraulic turbines
The recent development of computer-based tools with more efficient algorithms has allowed a substantial improvement in hydraulic turbine design. The definition of an initial geometry capable to assist certain characteristics of turbine performance is a first step for useful numerical turbine analysis. This paper presents an application of the minimum pressur
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2008-03
-
8. Migrações ascendentes de peixes neotropicais e hidrelétricas: proteção a jusante de turbinas e vertedouros e sistemas de transposição. / Upstream migrations of neotropical fishes and hidroelectric dams: protection downstream from turbines and from spillways and fish passages.
This work aims to examine engineering, mainly hydraulic engineering, aspects related to the effects of hydroelectric dams on upstream fish migration, identifying possible measures for the reduction of fish mortality, inside turbines draft tubes and in the region downstream from spillways, and describing the most common upstream fish passages, mainly vertical
Publicado em: 2008
-
9. Metodologia para desenvolvimento de base de conhecimento aplicada à manutenção baseada em condição de usinas hidrelétricas
This work presents a methodology for the development of knowledge bases applied to the condition based maintenance and implementation of an intelligent system. The methodology describes a detailed method that includes since the collection of the data until the implementation of the rules. The work starts with the data collection. The knowledge engineering id
Publicado em: 2008
-
10. Method ot get obtains of the governor s parameters by a hydraulic turbine / Metodo de obtenção dos parametros do regulador de uma turbina hidraulica
This work presents a new proposal to obtain the parameters of the regulator of a hydraulic turbine, looking for the goal to increase the operational control of a hydroelectric power plant. Among many existing methods, the Ziegler-Nichols shows itself adequate because in the determination of the parameters of the regulator simulations are carried out witch co
Publicado em: 2007
-
11. Real-time simulator for hydroturbine governor tests. / Simulador em tempo real para teste de reguladores de velocidade de turbinas hidráulicas.
Esta dissertação descreve um simulador em tempo real para aplicação em testes de reguladores de velocidade de hidrelétricas. O simulador é implementado num hardware que permite a conexão física de todos os sinais que o regulador teria na usina. As dimensões e o perfil hidráulico da usina, dados das máquinas e unidade de força hidráulica são ins
Publicado em: 2006
-
12. Model predictive control for Francis hydro turbine generators / Controle preditivo baseado em modelo para turbo-geradores hidraulicos tipo Francis
Despite being used in the industry for more than 20 years, Model Predictive Control (MPC) has not found many applications in the field of rotating machinery controI. The majority of the applications today are chemical and petrochemical processes. However, some results obtained by other authors for the control of gas and steam turbines, suggest that its use c
Publicado em: 2006