Heat Susceptibility
Mostrando 1-12 de 188 artigos, teses e dissertações.
-
1. Does an urban environment affect leaf structure of Eugenia uniflora L. (Myrtaceae)?
ABSTRACT External factors can interfere with the structure and biological activity of plants. Nevertheless, the susceptibility of plants to specific environmental conditions varies, which raises many questions about the behavior of medicinal plants when grown in urban areas. This study aims to detect possible changes induced by exposure of Eugenia uniflora L
Acta Bot. Bras.. Publicado em: 2020-06
-
2. Resistência à Corrosão de Juntas Dissimilares dos Aços AISI 316L e da Liga Inconel 718
Resumo A soldagem dissimilar (Dissimilar Metal Welds – DMWs), união de dois diferentes materiais metálicos, tem muitas aplicações industriais, com destaque para trocadores de calor nas usinas nucleares. Portanto, devem resistir à corrosão e a esforços mecânicos, entre outros requisitos. Neste trabalho foi abordada a susceptibilidade à corrosão d
Soldag. insp.. Publicado em: 21/10/2019
-
3. Nitretação a plasma da junta soldada do aço inoxidável super duplex SAF 2507
RESUMO Os aços inoxidáveis superduplex (AISD) apresentam em sua microestrutura as fases ferrita e austenita, de modo a conciliar boas propriedades mecânicas e de resistência à corrosão. Estes materiais possuem grande aplicação na indústria de extração de petróleo e na petroquímica. Quando estão sujeitos a estas aplicações, os dutos de AISD so
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Avaliação da Adição de Ti, Nb e (Ti+Nb) na Microestrutura e Susceptibilidade à Sensitização de Aços Inoxidáveis Ferríticos Submetidos à Soldagem TIG
Resumo Neste estudo, a microestrutura e a resistência à corrosão intergranular de aços inoxidáveis ferríticos com adições de Nb, Ti e (Ti+Nb) submetidos à soldagem TIG foram investigadas. A caracterização estrutural dos cordões de solda foi realizada através de microscopias óptica (MO) e eletrônica de varredura (MEV) e espectroscopia por energ
Soldag. insp.. Publicado em: 16/05/2019
-
5. Understanding heat stress in beef cattle
ABSTRACT Thermal stress is the result of a misbalance between heat produced or gained from the environment and the amount of heat lost to the environment. The level of thermal stress can range from minor or no effect to death of vulnerable animals. Under summertime conditions, thermal stress results in hyperthermia or heat stress. Heat stress in feedlot catt
R. Bras. Zootec.. Publicado em: 29/11/2018
-
6. Efecto del tratamiento térmico sobre la resistencia mecánica, corrosión intergranular y exfoliación de la aleación de aluminio 7075
ABSTRACT In this study, the effects of heat treatments in the peak aged (T6), overaged (T73) and retrogression and reaging (RRA, retrogression at 200 °C for 10 min) on the microstructure, mechanical strength, exfoliation corrosion and intergranular corrosion of aluminum alloy 7075, has been investigated by optical microscope, scanning electron microscopy, t
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Thermal Transformation and Characterization of Synthetic Al-Substituted Maghemites (γ-Fe2-xAlxO3)
ABSTRACT Burning is a common practice in tropical areas and related changes in mineralogy might affect the chemical and physical behavior of soils. Maghemite is a common iron oxide in soils formed from basic rocks in tropical regions. This mineral and hematite are the main pigments in these soils and exhibit high magnetization stemming from the precursor mag
Rev. Bras. Ciênc. Solo. Publicado em: 03/11/2016
-
8. Comportamiento a la Corrosión del Acero API X70 Soldado por el Proceso de Doble Arco Sumergido Inmerso en Diferentes Medios Corrosivos
Abstract The steels API X70 are applied in construction and fabrication of pipeline for transport of hydrocarbons, however, to lapse time are degrade due to environment to which are exposed, influencing on mode and corrosion rate on surface base metal (BM), heat zone affected (HAZ) and fusion zone (FZ). In order to know and evaluate the corrosion susceptibi
Soldag. insp.. Publicado em: 2016-06
-
9. The use of Mycobacterium tuberculosis HspX and GlcB proteins to identify latent tuberculosis in rheumatoid arthritis patients
Rheumatoid arthritis (RA) is an autoimmune disease characterised by the destruction of articular cartilage and bone damage. The chronic treatment of RA patients causes a higher susceptibility to infectious diseases such as tuberculosis (TB); one-third of the world’s population is latently infected (LTBI) with Mycobacterium tuberculosis(Mtb). The tuberculin
Mem. Inst. Oswaldo Cruz. Publicado em: 2014-02
-
10. Propriedades ópticas, magnéticas e estruturais de monocristais Cs2NaAlF6 dopados com cromo trivalente / Optical, magnetic and structural properties of Cs2NaAlF6 single crystals doped with trivalent chromium
This work is devoted to study the optical, magnetic and structural properties of the elpasolite crystal Cs2NaAlF6 with 0.1, 1.0, 3.0, 10.0, 30.0 and 50.0% of Cr3+ ions. The interest on this material lies on the fact that such system presents a broad, intense band in the visible and infrared regions at room temperature and therefore can be used as a tunable r
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/08/2011
-
11. Comparison of the efficacy of long-lasting insecticidal nets PermaNet® 2.0 and Olyset® against Anopheles albimanus under laboratory conditions
Insecticide-treated nets provide a reduction in human-vector contact through physical barrier, mortality and/or repellent effects that protect both users and non-users, thereby protecting the wider community from vector-borne diseases like malaria. Long-lasting insecticide-treated nets (LLINs) are the best alternative. This study evaluated the bioefficacy of
Memórias do Instituto Oswaldo Cruz. Publicado em: 2011-08
-
12. Influence of phosphorus content and quenching/tempering temperatures on fracture toughness and fatigue life of SAE 5160 steel
This study investigates the influence of quenching/tempering temperatures on the fracture toughness and fatigue life of SAE 5160 steel, considering different phosphorus contents. Quenching and tempering treatments were applied to samples removed from different bars of commercial SAE 5160 steel with different P content. Three different austenitizing temperatu
Materials Research. Publicado em: 2010-12