Avaliação da Adição de Ti, Nb e (Ti+Nb) na Microestrutura e Susceptibilidade à Sensitização de Aços Inoxidáveis Ferríticos Submetidos à Soldagem TIG

AUTOR(ES)
FONTE

Soldag. insp.

DATA DE PUBLICAÇÃO

16/05/2019

RESUMO

Resumo Neste estudo, a microestrutura e a resistência à corrosão intergranular de aços inoxidáveis ferríticos com adições de Nb, Ti e (Ti+Nb) submetidos à soldagem TIG foram investigadas. A caracterização estrutural dos cordões de solda foi realizada através de microscopias óptica (MO) e eletrônica de varredura (MEV) e espectroscopia por energia dispersiva (EDS). A susceptibilidade à sensitização foi avaliada qualitativamente através da Prática W da norma ASTM 763 e quantitativamente através da técnica DL-EPR. Observou-se uma rede de martensita nos contornos de grão na região da solda do aço não estabilizado e uma microestrutura completamente ferrítica nas amostras dos aços com adições de estabilizantes. A Prática W revelou corrosão generalizada no interior dos grãos do aço AISI 430 e a presença de valas no AISI 430 Ti e concomitantemente com a técnica DL-EPR constatou-se que esses aços foram sensitizados pela soldagem. Já as amostras dos aços com adições de Nb e (Ti+Nb) mantiveram boa resistência à corrosão, estando livres de sensitização após a soldagem.Abstract In this study the microstructure and the resistance to intergranular corrosion of ferritic stainless steels with additions of Nb, Ti and (Ti+Nb) submitted to the TIG welding were investigated. The microstructure of the weld beads was characterized by optical (MO) and scanning electron (SEM) microscopies and by energy dispersive x-ray spectroscopy (EDS). The susceptibility to sensitization was assessed qualitatively by Practice W of ASTM 763 and quantitatively by the DL-EPR technique. Martensite was observed at the ferrite grain boundaries in the fusion and heat affected zones of the non-stabilized steel and a completely ferritic microstructure in the steels samples with addition of stabilizers. Practice W revealed general corrosion inside the grains of the AISI 430 steel and the presence of ditches in the AISI 430 Ti. Concomitantly, with the DL-EPR technique, it was found that the weld region of these steels was sensitized. On the other hand, the samples of the steels with Nb and (Ti + Nb) additions maintained good resistance to corrosion and presented no sensitization after welding.

Documentos Relacionados