H20 Beams
Mostrando 1-11 de 11 artigos, teses e dissertações.
-
1. Revised formula for predicting the long-term deflection multiplier of normal and high strength concrete
Abstract High strength concrete (HSC) has found many applications in civil engineering structures such as in high-rise buildings, and bridges. The mechanical properties of HSC are sometimes different than of normal strength concrete (NSC). In particular, HSC possess lower creep strains compared to NSC. As a result, members constructed using HSC have been fou
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
2. Impact of Alloy Composition and Thermal Stabilization on Martensitic Phase Transformation Structures in CuAlMn Shape Memory Alloys
Alloys of CuAlMn are known as cheap, high strength shape memory alloys with an excellent damping capacity within their austenitic-martensitic phase transformation, compared to alloy systems like NiTi, CuZnAl or MnCu. But CuAlMn alloys have disadvantage due to generation of voids by a high shrinkage which further increases the existing proneness to stress cra
Mat. Res.. Publicado em: 19/07/2018
-
3. Processos de modificação molecular em polímeros irradiados com feixe de íons. / Processes of molecular modification of polymers irradiated with ion beam.
Diante da crescente necessidade de materiais com melhores propriedades para aplicações nos diversos campos da ciência e da tecnologia, a irradiação com feixes iônicos mostra-se como uma importante ferramenta de modicação de materiais. A irradiação de polímeros, em especial, fornece sempre novas perspectivas de aplicabilidade para esses materiais.
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/01/2012
-
4. Theoretical and experimental analysis of wood I-beams for formwork purpose / Análise teórica e experimental de vigas de madeira de seção transversal "I" para uso em fôrmas para concreto
Due to the importance of wood in construction and the concern about the environmental impact, engineers have worried about the rationalization of its use through the development of engineered products, seeking the improvement of the technical properties. In this study, the I-beams built with reforestation wood were used for concrete formwork purpose. Their m
Publicado em: 2010
-
5. STUDY OF CARBONATION OF THE COVERCRETE LAYER OF PROTOTYPES OF CONCRETE WITH HIGH ADDITIONS CONTENTS AND LIME HYDRATED / ESTUDO DA CARBONATAÇÃO DA CAMADA DE COBRIMENTO DE PROTÓTIPOS DE CONCRETO COM ALTOS TEORES DE ADIÇÕES MINERAIS E CAL HIDRATADA
In this study deals the covercrete structural concrete layer with the use of hydrated lime in substitution in mass of the sand in ternary mixture of 70% of blast-furnace slag, 20%-fly ash and 10% of cement CPV-ARI (EVC) in comparison to reference with 100% CPV-ARI (R) and other ternary mixture of 70%-ground granulated blast-furnace slag, 20%-fly ash and 10%-
Publicado em: 2008
-
6. Microdosimetric studies using a filtered fast neutron irradiation system of research reactor to application in radiation biology / Estudos microdosimétricos usando um sistema de irradiação de nêutrons rápidos filtrados de reator de pesquisa para aplicação de radiobiologia
In this work, microdosimetric measurements were performed using a Wall-less Tissue Equivalent Proportional Counter - TEPC was filled with spherical cavity with an inner diameter of 1.27 cm. The TEPC was tilled with pure propane gas, C3H8 at 5.6 kPa (42 Torr) pressure, which is equi\\alent to 1.3μm in diameter of unit density tissue. The microdosimetric me
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/06/2007
-
7. Efeito da armazenagem em NaOCl na degradação morfologica da interface adesiva e na resistencia de união em diferentes substratos / Effect of NaOCl storage on morphologic degradation of adhesive interface and bond strength in different substrates
The purpose of this in vitro study was to investigate the fast effect of the 10 % hypochrorite sodium storage in simulation to hydrolytic degradation and adhesive interface aged for long time, through to evaluate the bond strength of microtensile bond test. The 10% NaOCl solution used in short periods of time (hours) resulting in a significant decrease in bo
Publicado em: 2007
-
8. Fragmentation of exotic oxygen isotopes
Abrasion-ablation models and the empirical EPAX parametrization of projectile fragmentation are described. Their cross section predictions are compared to recent data of the fragmentation of secondary beams of neutron-rich, unstable 19,20,21O isotopes at beam energies near 600 MeV/nucleon as well as data for stable 17,18O beams.
Brazilian Journal of Physics. Publicado em: 2003-06
-
9. Efeito da associação composito-materiais resilientes sobre a resistencia da união dentina/composito em modelos experimentais bi e tridimensionais
T he aim of this in vitro study was to assess the effect of different { resin composites and elastic layers on resin/dentin bond strength on " the buccal wall of Class I cavities. Ninety-six caries-free third molars were ground flat to expose the dentin surface under running water. Class I cavities (C-factor = 4.5, 4 mm mesial-distal, 3 mm buccal-lingual and
Publicado em: 2003
-
10. Cristalização uniforme e seletiva de materiais semicondutores amorfos utilizando pulsos curtos de uma fonte de luz laser
We have investigated the laser induced crystallization of amorphous semiconductors using short-pulses (5-7 ns wide) from the second harmonic (l = 532 nm) of a Nd:Yag laser source. The main studied material was the amorphous germanium (a-Ge), while some alloys like its hydrogenated counterpart (a-Ge:H), silicon-germanium (a-SiGe) and germanium nitride (a-GeN)
Publicado em: 1998
-
11. Monte Carlo-based adaptive EPID dose kernel accounting for different field size responses of imagers
The aim of this study is to present an efficient method to generate imager-specific Monte Carlo (MC)-based dose kernels for amorphous silicon-based electronic portal image device dose prediction and determine the effective backscattering thicknesses for such imagers. EPID field size-dependent responses were measured for five matched Varian accelerators from
American Association of Physicists in Medicine.