Fracture Resistance
Mostrando 13-24 de 200 artigos, teses e dissertações.
-
13. Biomechanical development and evaluation of a new framework for all-on-four rehabilitation
Resumo Introdução Para reabilitação de mandíbulas totalmente edêntulas, a opção por carga imediata determina a utilização de próteses provisórias que esplintem os implantes instalados. Apesar de provisórias com reforço proverem as reabilitações com benefícios biomecânicos, a não adoção desta indicação coexiste em diferentes estudos so
Rev. odontol. UNESP. Publicado em: 29/07/2019
-
14. Effects of Gas Nitriding on Fatigue and Crack Initiation of Ti6Al4V produced by Selective Laser Melting
Selective laser melting (SLM) is an additive manufacturing technique which permits fabrication of three dimensional parts by selectively melting consecutive layers of metallic powder. This allows the production of parts with high geometrical complexity. Titanium alloy Ti-6Al-4V (Ti64) is widely used in industry due to its high strength-to-mass ratio, corrosi
Mat. Res.. Publicado em: 15/07/2019
-
15. Fatigue failure analysis of HSLA steel sheets holed by conventional and flow drilling processes
ABSTRACT Flow drilling process produces bushes for removable joints that can be threaded by forming tapping process, reducing stages in production of components of automobile industry and in construction sheds. High strength and low alloy steels (HSLA) are employed on several applications in the processing industry. Benefits provided by these materials make
Matéria (Rio J.). Publicado em: 10/06/2019
-
16. Desempenho balístico de estruturas multicamadas à base de alumina/epóxi
Resumo Alumina é comumente utilizada em blindagens compostas. Apresenta baixa tenacidade à fratura e esta propriedade está relacionada à resistência a múltiplos disparos. Com o intuito de melhorar a durabilidade em campo uma alternativa seria utilizar cerâmicas multicamadas. Neste estudo foi avaliado o desempenho balístico de estruturas multicamadas
Cerâmica. Publicado em: 06/06/2019
-
17. NUMERICAL ANALYSIS OF SHORT AND LONG INSTRUMENTATION IN THE TREATMENT OF THORACOLUMBAR FRACTURES CONSIDERING THE LIGAMENTOUS PORTION
RESUMO Objetivo: Este trabalho tem como objetivo avaliar numericamente o tratamento cirúrgico das fraturas toracolombares, comparando a resistências entre as fixações longas e curtas usando o pedículo da vértebra fraturada, levando-se em conta os ligamentos supra-espinhal, intertransversal e longitudinal anterior. Métodos: Foi realizada uma análise
Coluna/Columna. Publicado em: 01/06/2019
-
18. Oxidation Behavior of Al-Y Coating on γ-TiAl at 900°C
ABSTRACT In this study, an Al-Y coating was applied to enhance the property of oxidation resistance on the surface of γ-TiAl alloys by rf magnetron sputtering. The isothermal oxidation tests were investigated at 900 °C for 100 h. The coating characteristics and microstructure of coating after isothermal oxidation were inspected by XRD and SEM methods respe
Matéria (Rio J.). Publicado em: 20/05/2019
-
19. Experimental studies of short concrete reinforced steel fiber beams under bending
Resumo Este estudo apresenta os resultados do rompimento de dois grupos de vigas de concreto com fibras de aço. Cada grupo foi composto de 4 vigas com vão de 300 mm, 4 com vão de 500 mm e 4 com vão de 800 mm e seção de 15 cm x 15 cm. A variação dos grupos se deu pela quantidade de fibras (I com 40 kg/m³ e II com 60 kg/m³). Foram avaliados o comport
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
20. Cyclic fatigue resistance of novel Genius and Edgefile nickel-titanium reciprocating instruments
Abstract: This study aimed to assess the cyclic fatigue resistance of Genius and EdgeFile X1 reciprocating instruments compared with WaveOne Gold Primary. Twenty Genius (Ultradent) 25.04, 20 Genius 30.04, 20 EdgeFile X1 (EdgeEndo) and 20 WaveOne Gold Primary (Dentsply Maillefer) instruments were included in this study and tested in a static cyclic fatigue te
Braz. oral res.. Publicado em: 11/04/2019
-
21. Volume and/or Time of NaOCl Influences the Fracture Strength of Endodontically Treated Bovine Teeth
Resumo O objetivo desse estudo foi o de avaliar se o aumento de volume e/ou tempo de contato do NaOCl afeta a resistência à fratura de dentes bovinos tratados endodonticamente. Quatro incisivos bovinos de 10 animais foram alocados em 4 grupos usando um desenho experimental de boca dividida. Os canais radiculares foram instrumentados usando uma sequência d
Braz. Dent. J.. Publicado em: 2019-02
-
22. Weibull analysis of tensile tested piassava fibers with different diameters
ABSTRACT Environmental considerations in addition to technical, economical and societal benefits are increasingly promoting the substitution of natural fibers for glass fiber in polymer matrix composites. However, natural fibers are heterogeneous in their dimensions, specially the cross section, which plays an important role in their mechanical strength. It
Matéria (Rio J.). Publicado em: 06/12/2018
-
23. Nickel-Titanium Alloys Welding of Thin Sheets Using GTAW: Comparative Study Between Similar and Dissimilar Welding with AISI 304 Stainless Steel
The objective of the present work was to evaluate welding of thin sheets (thickness < 1 mm) of similar and dissimilar NiTi alloys with AISI 304 stainless steel using the Gas Tungsten Arc Welding (GTAW) process and to study the mechanical and metallurgical properties of the joints with and without post-welding heat treatment (PWHT). The GTAW process was chose
Mat. Res.. Publicado em: 08/11/2018
-
24. Obtención de aceros de baja aleación con diferentes contenidos de Ni y similares microestructuras y propiedades mecánicas
ABSTRACT Low alloy steels are used in many applications in the oil and gas industry. The addition of Ni in these steels improves their low temperature fracture toughness and hardenability, with a low penalty on weldability. However, ISO 15156-2 standard restricts Ni content up to a 1 wt% limit, requiring additional and expensive tests if higher Ni steels are
Matéria (Rio J.). Publicado em: 19/07/2018