NUMERICAL ANALYSIS OF SHORT AND LONG INSTRUMENTATION IN THE TREATMENT OF THORACOLUMBAR FRACTURES CONSIDERING THE LIGAMENTOUS PORTION

AUTOR(ES)
FONTE

Coluna/Columna

DATA DE PUBLICAÇÃO

01/06/2019

RESUMO

RESUMO Objetivo: Este trabalho tem como objetivo avaliar numericamente o tratamento cirúrgico das fraturas toracolombares, comparando a resistências entre as fixações longas e curtas usando o pedículo da vértebra fraturada, levando-se em conta os ligamentos supra-espinhal, intertransversal e longitudinal anterior. Métodos: Foi realizada uma análise numérica das técnicas de fixação longa e curta deumafratura da coluna toracolombar, utilizando-se imagens de tomografia computadorizada que foram convertidas em modelos tridimensionais e analisados através do programa ANSYS. Os dois tipos de tratamentos foram analisados considerando-se as tensões geradas no período pós operatório imediato, quando a fratura ainda não está consolidada. Foram adicionados os ligamentos longitudinal anterior, posterior, supra-espinhal e intertransversal, além de se considerar diferentes geometrias vertebrais. Resultados: Levando em consideração que a tensão máxima de ruptura do material utilizado no implante metálico, no caso o titânio, ser de 960 MPa, a maior tensão encontrada na análise da instrumentação curta foi de 346,83 MPa, atingindo apenas 36,13% da carga que o material suporta, estando, portanto, dentro de um limite de segurança. A análise realizada na coluna com instrumentação longa verificou o valor de tensão mais elevado de 229,22 MPa. Conclusão: Considerando os valores encontrados e a resistência do material de síntese utilizado, a utilização da fixação curta e longa podem ser consideradas no tratamento das fraturas toracolombares apresentando similaridade e um bom coeficiente de segurança. Nível de Evidência III; Caso-Controle.ABSTRACT Objective: This study aims to numerically evaluate the surgical treatment of thoracolumbar fractures, comparing the strengths between the long and short fixations using the pedicle of the fractured vertebra, taking into account the supraspinous, intertransverse, and anterior longitudinal ligaments. Methods: A numerical analysis of the techniques of long and short fixation of a thoracolumbar spine fracture was performed using computed tomography images that were converted into three-dimensional models and analyzed through the ANSYS program. The two types of treatments were analyzed considering the tensions generated in the immediate postoperative period, when the fracture has not yet been consolidated. The anterior, posterior, supraspinal and intertransverse longitudinal ligaments were added, in addition to considering different vertebral geometries. Results: Taking into account that the maximum tensile stress of the material used in the metal implant, in the case of titanium, was 960 MPa, the highest tension found in the analysis of the short instrumentation was 346.83 MPa, reaching only 36.13% of the load the material supports, being, therefore, within a safety limit. The analysis performed in the spine with long instrumentation showed the highest tension value of 229.22 MPa. Conclusions: Considering the values found and the resistance of the synthesis material used, the short and long fixation can be considered in the treatment of thoracolumbar fractures with similarity and a good safety coefficient. Level of Evidence III; Case-Control.

Documentos Relacionados