Flux Density
Mostrando 1-12 de 204 artigos, teses e dissertações.
-
1. Determination of Electric and Magnetic Field Calculation Uncertainty in the Vicinity of Overhead Transmission Lines
Abstract This paper presents a new approach for uncertainty determination of the electric field intensity and magnetic flux density calculation in the vicinity of overhead transmission lines. The proposed method is based on the law of propagation of uncertainty as defined in the Guide to the expression of Uncertainty in Measurement. A mathematical model is d
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Radially Periodic Metasurface Lenses for Magnetic Field Collimation in Resonant Wireless Power Transfer Applications
Abstract In this paper, a new procedure and topology of magnetic metasurface lens are proposed for improving the performance of Resonant Wireless Power Transfer systems. Firstly, three subwave-length unit cells are optimized in order to get negative magnetic permeability in the same frequency, each one with a different refractive index, and they are experime
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Low intensity extracorporeal shockwave Therapy shifts PDE5i nonresponders to responders
ABSTRACT To evaluate the efficiency of an energy density of 0.05mj/mm2 of low intensity extracorporeal shockwave therapy (Li-ESWT) on erectile dysfunction (ED) patients.A total of 45 ED patients met the inclusion criteria, including 7 PDE5i responders and 38 nonresponders. All the patients have already been delivered 10000 shockwaves of total seven treatment
Int. braz j urol.. Publicado em: 2020-12
-
4. On-load Back-EMF Optimization Based on the Back-EMF MST Method and Parametric Optimization
Abstract This paper proposes an optimal design for a surface mounted permanent magnet synchronous machine (SM-PMSM) based on parametric optimization process to reduce the on-load Back-EMF distortions caused by an increase in the electromagnetic load and in the saturation. Unlike conventional methods described in the literature, the optimization approach prop
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
5. Produção de agregado sintético de argila com reaproveitamento de resíduo de vidro
RESUMO É objetivo da construção civil, reduzir o peso das estruturas e consequentemente os custos com as fundações. A substituição de britas por agregados leves é a alternativa mais utilizada. No entanto, sobretudo no Brasil, só existe uma única fábrica de agregados leves localizada em São Paulo, sendo oportuna a pesquisa de matériasprimas para
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Plumas em escoamento uniforme com estratificação de duas camadas
RESUMO Plumas ocorrem quando um fluido é descarregado em outro fluido com densidade diferente, como poluentes na atmosfera. Neste trabalho, desenvolveu-se um estudo experimental em um tanque de água e modelagem matemática usando a abordagem integral com o intuito de investigar o escoamento gerado por plumas salinas em escoamento uniforme e com estratifica
Eng. Sanit. Ambient.. Publicado em: 08/04/2019
-
7. Identificación de precipitados en aleaciones U-Nb-Zr tratadas térmicamente a 850 ºC
ABSTRACT At the present, the international goal is to develop and qualify a very high U density fuel for high flux research reactors. The selected U-alloy must present an isotropic crystalline structure at the end of the fuel fabrication process. These types of structures exhibit stable behavior under irradiation. In particular, it is wanted to retain as met
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Temporal Variation of Soil Physical Quality under Conventional and No-Till Systems
ABSTRACT: Determination of soil physical quality (SPQ) is very important because it is related to many important soil processes. However, it is not clear which indicators should be considered in this evaluation, and information about temporal variation of SPQ under different soil tillage systems is scarce. The aim of this study was to determine the effects o
Rev. Bras. Ciênc. Solo. Publicado em: 16/04/2018
-
9. Magnetic topology with axial flux concentration: a technique to improve permanent-magnet motor performance
Abstract This article presents a different topology for the magnetic circuit of permanent-magnet motors, using the concept of Axial Flux Concentration. By means of longitudinal extension of the rotor length beyond the stator core, a substantial increase in the flux per pole is enabled, improving the general performance of the machine. Even in low cost motors
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-12
-
10. Incorporation of Lead Containing TV Tube Glass Waste in Aluminous Porcelain
The aim of this work was to study the incorporation of lead containing TV tube glass waste as a method to provide alternative raw material for aluminous electrical porcelain. For this purpose, aluminous porcelain formulations containing up to 30 wt.% of TV tube glass waste as a replacement for traditional flux material (sodium feldspar) were pressed and fire
Mat. Res.. Publicado em: 21/09/2017
-
11. Thermodynamic bounds for existence of normal shock in compressible fluid flow in pipes
Abstract The present paper is concerned with the thermodynamic theory of the normal shock in compressible fluid flow in pipes, in the lights of the pioneering works of Lord Rayleigh and G. Fanno. The theory of normal shock in pipes is currently presented in terms of the Rayleigh and Fanno curves, which are shown to cross each other in two points, one corresp
An. Acad. Bras. Ciênc.. Publicado em: 2017-06
-
12. Development of an Analytical Method to Predict the Behaviour of the Magnetic Field in PM Linear Motors with Halbach Array
Abstract This paper describes the application of the method of separation of variables and the use of Fourier series for solving the Laplace's and Poisson's equations on the study and analysis of the magnetic field produced in a linear motor with Halbach array. Equations for predicting the 2D magnetic flux density distribution produced in the air gap were de
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-03