Finite Difference Methods
Mostrando 1-12 de 51 artigos, teses e dissertações.
-
1. Simulation of Stress Distribution on the Upper First Molar and Alveolar Bone with the Transpalatal Arch and Upper Second Molar Using Finite Element Analysis
Abstract Objective: To evaluate the differences in the stress distribution on the upper first molar with and without transpalatal arch and a second molar when a 150 g force is applied during canine distalization using finite element analysis. Material and Methods: We constructed several models with data obtained by scanning human skulls using cone beam com
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 13/01/2020
-
2. Smart Graphene-Based Frequency Selective Surface Designed to Act as Single or Dual Band Device with Reconfigurable Operation Bands
Abstract In this paper, a finite-difference time-domain (FDTD) formulation, based on the exponential matrix and on thin material sheet methods is developed for modeling subcellular thin graphene sheets. This formulation is validated by reproducing graphene frequency selective surfaces (FSS) known from literature. Then, we propose in this work a smart graphen
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 11/11/2019
-
3. Rediscutindo Soluções Numéricas de Equações de Onda
Resumo Nesta contribuição, é nosso principal objetivo apresentar um método numérico de solução da equação de onda, seja esta de origem mecânica ou eletromagnética. Baseando-nos nesta solução, podemos avaliar o comportamento destas ondas sob diferentes aspectos e condições, visto que, as ondas eletromagnéticas conseguem se propagar no vácuo,
Rev. Bras. Ensino Fís.. Publicado em: 27/06/2019
-
4. An Extended Linear Discontinuous Method for One-group Fixed Source Discrete Ordinates Problems with Isotropic Scattering in Slab Geometry
RESUMO Atualmente, a obtenção de uma solução numérica precisa para problemas de fonte fixa em ordenadas discretas é relevante em muitas áreas da engenharia e das ciências. Neste trabalho, estendemos o método híbrido Elementos Finitos-Espectro Nodal (FEM-SGF), que foi originalmente desenvolvido para resolver problemas de autovalores de difusão, par
TEMA (São Carlos). Publicado em: 30/05/2019
-
5. Comparison of two asymmetric headgear force systems: A finite element analysis
Resumo Objetivo: o objetivo desse estudo foi usar o método de elementos finitos 3D para avaliar o efeito no padrão de deslocamento dos molares em resposta ao uso de aparelhos extrabucais com diferentes forças assimétricas. Métodos: foram confeccionados 25 aparelhos extrabucais (AEB) com diferenças, entre os lados direito e esquerdo, quanto ao compri
Dental Press J. Orthod.. Publicado em: 20/05/2019
-
6. Realistic deformable 3D numeric phantom for transcutaneous ultrasound
Abstract Introduction Numerical phantoms are important tools to design, calibrate and evaluate several methods in various image-processing applications, such as echocardiography and mammography. We present a framework for creating ultrasound numerical deformable phantoms based on Finite Element Method (FEM), Linear Isomorphism and Field II. The proposed met
Res. Biomed. Eng.. Publicado em: 16/03/2017
-
7. CFD 2D Description of Local Flow of Polymer Workpiece through a modified U-Shaped Die During Equal Channel Multiple Angular Extrusion
The present article is focused on a 2D computational fluid mechanics study of local viscous flow dynamics and the formation character of rotary modes of deformation during Equal Channel Multiple Angular Extrusion (ECMAE) of a polymer workpiece fluid model through a U-shaped die with parallel slants in channel intersection zones. The present local flow proble
Mat. Res.. Publicado em: 08/04/2016
-
8. Parametric Model Method and Deployment Simulation of Inflatable Antenna Structures
ABSTRACT: In this paper, we develop a parametric model method and simulate the deployment mechanism of inflatable antenna structures. Different folded methods are developed for the primary members of inflatable antenna structures, which include inflatable tubes, an inflatable torus, a reflector etc. The unstressed configuration and the folded configuration o
J. Aerosp. Technol. Manag.. Publicado em: 2015-06
-
9. Simulação computacional de escoamentos reativos com baixo número Mach aplicando técnicas de refinamento adaptativo de malhas / Computational simulation of low Mach number reacting flows applying adaptive mesh refinement techniques.
It is the main goal of the present work to extend a numerical methodology based on both the use of an adaptive mesh refinement technique (AMR) and the use of a multistep, implicit-explicit time-step strategy (IMEX) to applications involving low Mach number reactive flows. Originally developed for incompressible flows, the Eulerian formulation of that methodo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/06/2012
-
10. Evaluation of radiances generated by solving the radiative-transfer equation with different approaches
Radiative transfer is the main phenomenon in the basis of several relevant problems of scientific and technological interest. Examples of application of the mathematical and computational modeling of such phenomenon can be found in astronomy, environmental sciences, engineering and medicine among many different areas. The integro-differential equation known
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-06
-
11. Estudos de métodos numéricos para a simulação de escoamentos viscoelásticos com superfície livre / Numerical methods for viscoelastic free surface flows
Neste projeto, é apresentado um método numérico com uma abordagem do tipoMAC para a simulação de escoamentos viscoelásticos incompressíveis tridimensionais com superfície livre governados pelo modelo de fluido SXPP. A formulação apresentada nesse trabalho é uma extensão dos resultados obtidos por Oishi et al. (2011), sobre o estudo de métodos nu
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/08/2011
-
12. Numerical solution of the Falkner-Skan equation using third-order and high-order-compact finite difference schemes
We present a computational study of the solution of the Falkner-Skan equation (a thirdorder boundary value problem arising in boundary-layer theory) using high-order and high-order-compact finite differences schemes. There are a number of previously reported solution approaches that adopt a reduced-order system of equations, and numerical methods such as: sh
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-12