Fiber Composites
Mostrando 1-12 de 278 artigos, teses e dissertações.
-
1. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
2. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
3. Study of the Moisture Absorption in Polymer Composites Reinforced with Vegetal Fiber Using Langmuir’s Model
This work aims to numerically study the moisture absorption in polymer composites reinforced with vegetal fiber, using the diffusive model of Langmuir, which considers the existence of water molecules inside the material free to diffuse and adsorb at the capillaries walls, in the solid. A three-dimensional and transient mathematical modelling to describe the
Mat. Res.. Publicado em: 11/11/2019
-
4. Evaluation of the Projectile's loss of Energy in Polyester Composite Reinforced with Fique Fiber and Fabric
Firearms threat has always been a matter of personal concern, especially to soldiers in armed conflicts as well as police officers and civilians involved with public security. A multilayered armor system (MAS) is intended to personal protection against high kinetic energy ammunition, such as that used in rifles. MAS layers are normally composed of a front ce
Mat. Res.. Publicado em: 21/10/2019
-
5. Crosslinking starch/oat hull mixtures for use in composites with PLA
Abstract Modification of composite components has been proposed as a tool to improve their functional properties. The present work studied crosslinking of a starch/oat hull mixture by reactive extrusion with sodium trimetaphosphate (STMP), for application in composites with polylactic acid (PLA). The treated mixture was characterized regarding degree of subs
Polímeros. Publicado em: 10/10/2019
-
6. Influence of coupling agents on the adhesion force of dissimilar overmolded polymers: a digital image correlation analysis
ABSTRACT The increase in the technical and functional requirements of plastic items has led the development of multimaterials. To achieve a good performance in the adhesion of dissimilar materials, in this case, polypropylene and coconut fiber composites, it is fundamental to understand the phenomena related to the specific interface. This work aims to evalu
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Genetic diversity and nonparametric statistics to identify possible ISSR marker association with fiber quality of pineapple
Abstract: Due to the increasing search for renewable resources, plant fibers have become an alternative when creating new products. Studies demonstrate the potential use of pineapple fibers in composites. The objective of this work was to evaluate the genetic diversity and verify any association between ISSR (Inter Simple Sequence Repeats) bands and quality
An. Acad. Bras. Ciênc.. Publicado em: 16/09/2019
-
8. Influência de interfases sobre a condutividade térmica efetiva de compósitos periódicos reforçados por fibras
RESUMO Os materiais compósitos comumente apresentam delgadas regiões ou interfases localizadas entre a matriz e as inclusões. Estas interfases têm influência no comportamento efetivo do compósito. Em diversas aplicações, os compósitos estão sujeitos a variações significativas de temperatura e, consequentemente, a condutividade térmica efetiva de
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Comportamento térmico de compósitos de poliestireno reciclado reforçado com celulose de bagaço de cana
RESUMO O poliestireno expandido (EPS) é um polímero reciclável amplamente utilizado na fabricação de embalagens para isolamento acústico, proteção de bens de consumo duráveis e na indústria da construção civil. O PS é facilmente reciclável com o aumento da temperatura, podendo dar origem a novos materiais. Entretanto suas propriedades térmicas
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Effect of moringa and bagasse ash filler particles on basalt/epoxy composites
Abstract This study evaluated the effect of moringa and nano ash filler particles on mechanical, chemical corrosion and moisture absorption of basalt fiber/epoxy composites. Epoxy resin and Araldite HY951 hardener was used as matrix along with the inclusion of filler particles while the bi-directional woven basalt fiber mat was used as the reinforcement in f
Polímeros. Publicado em: 09/09/2019
-
11. Cellulose Nanocrystals and Jute Fiber-reinforced Natural Rubber Composites: Cure Characteristics and Mechanical Properties
A comparative study was conducted for three natural rubber (NR) composites: one containing raw jute fibers, one containing bleached jute fibers, and one containing cellulose nanocrystals (CNCs). The composites were prepared by adding each filler at 5 or 10 phr to the latex before chemical coagulation, and the composites were processed in a two-roll mixing mi
Mat. Res.. Publicado em: 26/08/2019
-
12. Fragmentation model for the tensile response of unidirectional composites based on the critical number of fiber breaks and the correction of the fiber-matrix interfacial strength.
Abstract A fragmentation model based on global load sharing (GLS) theory is developed to obtain stress-strain curves that describe the mechanical behavior of unidirectional composites. The model is named C N B + τ * because it is based on the Critical Number of Breaks model (CNB) and on the correction of the fiber matrix interfacial strength, τ *
Lat. Am. j. solids struct.. Publicado em: 15/08/2019