Feldspathic
Mostrando 1-12 de 30 artigos, teses e dissertações.
-
1. Colorimetric analysis of dental porcelains: effects of the background color
Abstract This study evaluated how the background (white or gray) affects the color parameter measurements and color difference calculations (∆Eab and ∆E00) of dental ceramics. Disc-shaped feldspathic ceramic specimens were prepared with two shades (enamel and dentin) and stained in red wine (7-day immersion). A spectrophotometer was used to perform color
Cerâmica. Publicado em: 2022
-
2. Influence of hydrofluoric acid etching time and concentration on shear bond strength of metal brackets to ceramic surfaces
Resumo Introdução O tratamento de superfície prévio a colagem de braquetes a cerâmica com ácido fluorídrico, é indicado devido a sua capacidade de promover alterações morfológicas necessárias para a adesão. Objetivo Avaliar a resistência de união ao cisalhamento (RUC) de braquetes metálicos unidos à superfície cerâmica feldspática sob a
Rev. odontol. UNESP. Publicado em: 13/12/2019
-
3. Bond strengths of various resin cements to different ceramics
Abstract This study evaluates the shear bond strength (SBS) of various resin cements to different ceramics. Composite resin cylinders of Z100 were fabricated and cemented to disks of feldspathic ceramic (Creation), leucite-reinforced feldspathic ceramic (Empress I), and densely sintered aluminum oxide ceramic (Procera AllCeram) using five resin cements: Pana
Braz. oral res.. Publicado em: 14/10/2019
-
4. Influence of Pre-Curing Different Adhesives on the Color Stability of Cemented Thin Ceramic Veneers
Resumo O objetivo deste estudo foi avaliar a estabilidade de cor de laminados cerâmicos de espessura fina em função do momento de ativação de diferentes sistemas adesivos na superfície interna das cerâmicas. Foram utilizados 5 sistemas adesivos (Scotchbond Multiuso, Single Bond Universal, Gluma 2 Bond, Ambar and Ambar APS) e o cimento resinoso fotoati
Braz. Dent. J.. Publicado em: 03/06/2019
-
5. Brittleness index and its relationship with materials mechanical properties: Influence on the machinability of CAD/CAM materials
Abstract: The aim of this study is to evaluate the machinability of four CAD/CAM materials (n = 13) assessed by brittleness index, Vickers hardness, and fracture toughness and interaction among such mechanical properties. The materials selected in this in vitro study are Feldspathic ceramic [FC], Lithium-disilicate glass ceramic [LD], leucite-reinforced glas
Braz. oral res.. Publicado em: 04/04/2019
-
6. Influence of ceramic material, thickness of restoration and cement layer on stress distribution of occlusal veneers
Abstract The aim of this study was to evaluate stress distribution in an occlusal veneer according to the restorative material, restoration thickness, and cement layer thickness. A tridimensional model of a human maxillary first molar with an occlusal veneer preparation was constructed using a modeling software of finite element analysis. The model was repli
Braz. oral res.. Publicado em: 29/11/2018
-
7. Can heat-pressed feldspathic ceramic be submitted to multiple heat-pressing?
Abstract The aim of this study was to determine if multiple processing (heat-pressing) of a dental ceramic influences flexural strength, hardness, and microstructure. Ninety bar-shaped specimens (15 mm × 4 mm × 2 mm) of a pressed ceramic (Vita PM9) were fabricated and randomly divided into 6 groups (n = 15) according to the factors “number of pressings�
Braz. oral res.. Publicado em: 25/10/2018
-
8. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations
Abstract This in vitro study evaluated the fatigue strength of different ceramic materials indicated for monolithic restorations. Disc-shaped specimens were made according to ISO 6872 from five different ceramic materials: feldspathic ceramic (FC), polymer-infiltrated ceramic network (PIC), lithium disilicate glass-ceramic (LD), zirconia-reinforced lithium s
Braz. oral res.. Publicado em: 11/06/2018
-
10. Melanite-bearing nepheline syenite fragments and 40Ar/39Ar age of phlogopite megacrysts in conduit breccia from the Poços de Caldas Alkaline Massif (MG/SP), and implications
ABSTRACT: The Poços de Caldas Alkaline Massif, located in southeast Brazil, is composed of tinguaites, as well as phonolites and nepheline syenites (NeS), together with assorted pyroclastic rocks. The latter constitute deposits within the Vale do Quartel, and show fragments of alkaline rocks (NeS, tinguaites), basaltic and ultramafic volcanics/subvolvanics,
Braz. J. Geol.. Publicado em: 2018-06
-
11. Effect of the Cooling Rate on the Properties of Veneer Porcelain for Zirconia Dental Prosthesis
To solve chipping of veneer porcelain in zirconia dental prosthesis it has been studied different cooling rates in firing schedules to control residual stresses generated by differences in thermal properties between the ceramics. However, cooling rates may affect the porcelain, irrespectively of interaction with zirconia. This study analyzed the effect of co
Mat. Res.. Publicado em: 07/08/2017
-
12. Degree of conversion and bond strength of resin-cements to feldspathic ceramic using different curing modes
Abstract Resin cements have led to great advances in dental ceramic restoration techniques because of their ability to bond to both dental structures and restorative materials. Objective The aim of this study was to assess the performance of resin cements when different curing modes are used, by evaluating the degree of conversion and bond strength to a ce
J. Appl. Oral Sci.. Publicado em: 2017-02