Feldspathic
Mostrando 13-24 de 30 artigos, teses e dissertações.
-
13. Use of Feldspathic Porcelain Veneers to Improve Smile Harmony: A 3-Year Follow-up Report
Resumo Este relato de caso descreve um tratamento estético para melhorar a forma e alinhamento dos dentes anteriores, restabelecendo a harmonia do sorriso por meio de laminados de porcelana feldspática. Resultados de acompanhamento clínico longitudinal de 36 meses também são apresentados. As vantagens, desvantagens e limitações da técnica são detalh
Braz. Dent. J.. Publicado em: 2016-12
-
14. Surface Treatments for Repair of Feldspathic, Leucite - and Lithium Disilicate-Reinforced Glass Ceramics Using Composite Resin
O objetivo deste estudo foi avaliar a eficácia de diferentes condicionamentos de superfície na resistência de união de reparos de compósitos restauradores em três tipos de cerâmicas odontológicas: reforçada por dissilicato de lítio, reforçada por leucita e feldspática. Foram confeccionados 12 blocos para cada tipo de cerâmica (n=3) e armazenados
Braz. Dent. J.. Publicado em: 2015-04
-
15. Influence of surrounding wall thickness on the fatigue resistance of molars restored with ceramic inlay
The purpose of this study was to evaluate the influence of buccal and lingual wall thickness on the fatigue resistance of molars restored with CAD/CAM ceramic inlays. Forty human third molars were selected and divided into 4 groups, according to the remaining surrounding wall thickness chosen for inlay preparation (n = 10): G1, 2.0 mm; G2, 1.5 mm; G3, 1.0 mm
Braz. oral res.. Publicado em: 11/06/2014
-
16. Micro-shear bond strength and surface micromorphology of a feldspathic ceramic treated with different cleaning methods after hydrofluoric acid etching
Objective: The aim of this study was to evaluate the effect of feldspathic ceramic surface cleaning on micro-shear bond strength and ceramic surface morphology. Material and Methods: Forty discs of feldspathic ceramic were prepared and etched with 10% hydrofluoric acid for 2 minutes. The discs were randomly distributed into five groups (n=8): C: no tre
J. Appl. Oral Sci.. Publicado em: 2014-04
-
17. Strength of 3Y-TZP and feldspathic porcelain subjected to different cooling methods
AIM: To investigate the effect of the cooling rate on flexural strength of monolayer and bilayer porcelain/zirconia (Y-TZP) bars. METHODS: Forty-five specimens were made for each design group: (PM) monolithic specimens of veneer porcelain Vita VM9 (Vita, Germany); (ZM) monolithic specimens of zirconia (ZiHP; ProtMat, Brazil); (PB) bilayer specimens zir
Braz. J. Oral Sci.. Publicado em: 2014-04
-
18. Production and characterization of colored feldspathic enamel for dental application
In this work we synthesized pigments capable of developing dental shades when mixed with dental porcelain and fired at appropriate temperatures. TiO2-xCeO2 pigments (x = 2, 6, 10, 13 and 18 mol%) were synthesized by the Pechini method. Characterization by thermal analysis revealed the stability of the material at temperatures up to 1200 ºC. X-ray diffractio
Mat. Res.. Publicado em: 18/02/2014
-
19. Influence of the interposition of ceramic spacers on the degree of conversion and the hardness of resin cements
This study evaluated: I) the effect of photo-activation through ceramics on the degree of conversion (DC) and on the Knoop hardness (KHN) of light- and dual-cured resin cements; and II) two different protocols for obtaining the spectra of uncured materials, to determine the DC of a dual-cured resin cement. Thin films of cements were photo-activated through c
Braz. oral res.. Publicado em: 2013-09
-
20. Effects of cement-curing mode and light-curing unit on the bond durability of ceramic cemented to dentin
The aim of this study was to evaluate the effects of different light-curing units and resin cement curing types on the bond durability of a feldspathic ceramic bonded to dentin. The crowns of 40 human molars were sectioned, exposing the dentin. Forty ceramic blocks of VITA VM7 were produced according to the manufacturer's recommendations. The ceramic surface
Braz. oral res.. Publicado em: 01/03/2013
-
21. Efeito do processamento e da inclusão de fibras nas propriedades mecânicas e ópticas de uma porcelana odontológica / The effect of processing methods and fibers incorporation on the optical and mechanical properties of a dental porcelain
The objective was to evaluate the processing methods (conventional sintering and heat pressing) and fibers incorporation on the microstructure, mechanical properties (flexural strength f, and Weibull parameters m, 0 e 5%), slow crack growth parameters (n e f0) and contrast ratio (CR), translucency parameter (TP), opalescence parameter (OP) optical properties
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/08/2011
-
22. Effects of different polishing techniques on the surface roughness of dental porcelains
OBJECTIVE: The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains. MATERIAL AND METHODS: Fifty-five cylindirical specimens (15x2 mm) were prepared for each feldspathic (Vita VMK 95, Ceramco III) and low-fusing dental porcelain (Matchmaker). Fifty-five specimens of machinable felds
Journal of Applied Oral Science. Publicado em: 2010-02
-
23. Avaliação in vitro da resistência ao cisilhamento de três agentes cimentantes em porcelana feldspática / Shear bond strength in vitro evaluation of three ciments in feldspathic porcelain
O presente estudo teve como objetivo comparar as resistências adesivas de três cimentos, entre dentina bovina e uma porcelana (Star Light Ceram) através de ensaio de cisalhamento em dois períodos de tempo. Foram utilizados incisivos bovinos incluídos numa matriz com resina epóxica. Cilíndros de porcelana (5 mm de altura e 6 mm de diâmetro) foram conf
Publicado em: 2009
-
24. Características epigenéticas do depósito de cu-au chapada, arco magmático de goiás
The Cu-Au Chapada deposit is located from 8km of Alto Horizonte-GO. The geologic picture is dominated by metavulcanic sedimentary sequences that integrate the Neoproterozoic Magmatic Arc of Mara Rosa, located in the central portion of the Tocantins Province. The framework of the deposit is represented by an antiform whose core is composed by association of t
Publicado em: 2009