Electrical Properties
Mostrando 25-36 de 835 artigos, teses e dissertações.
-
25. Thermal, dielectric and catalytic behavior of palladium doped PVC films
Abstract The present paper discusses the aspects of synthesizing palladium (Pd) doped (Pd+2 and Pd0) poly(vinyl chloride) (PVC) using simple solution cast technique. The Pd loading to PVC was altered from 2.5% to 10.0% and the material properties were studied using UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscop
Polímeros. Publicado em: 04/07/2019
-
26. Establishment of homogeneous zones in a soil of alluvial origin
RESUMO A capacidade do solo para manter o crescimento da planta e a actividade biológica reside nas suas propriedades físicas e químicas. O objectivo deste estudo foi observar a distribuição espacial das propriedades químicas do solo como pH, matéria orgânica (MO), condutividade eléctrica (CE), capacidade de troca catiônica eficaz (CTCE) e conteúd
Ciênc. agrotec.. Publicado em: 19/06/2019
-
27. Characterization of Algerian kaolins for utilization as a raw material in electrical insulators
Resumo O objetivo desta investigação foi caracterizar três amostras de caulim (DD1, DD2 e DD3) coletadas do depósito de Djebel Debbagh (leste da Argélia) para serem utilizadas em isoladores elétricos de porcelana. Análise granulométrica, fluorescência de raios X, difração de raios X, microscopia eletrônica de varredura e análise térmica (TG-ATD
Cerâmica. Publicado em: 06/06/2019
-
28. Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization
Resumo Hexaferritas de estrôncio com adição de Y3+ com composição química SrYxFe12-xO19 (x= 0,0, 0,5, 1,0, 1,5) foram sintetizadas com sucesso pelo método sol-gel com autocombustão. Os estudos estruturais e morfológicos das amostras preparadas foram investigados usando a técnica de difração de raios X, espectroscopia de energia dispersiva, micros
Cerâmica. Publicado em: 06/06/2019
-
29. Al-doping and Properties of AZO Thin Films Grown at Room Temperature: Sputtering Pressure Effect
Aluminum zinc oxide (AZO) thin films were synthesized on glass substrates by radio frequency (rf) magnetron sputtering from a metallic Zn-Al (5 at. %) target at room temperature. The morphological, structural, electrical and optical properties of the films were studied as a function of the sputtering pressure, which was varied from 0.1 to 6.7 Pa. X-ray diffr
Mat. Res.. Publicado em: 09/05/2019
-
30. SPATIALIZATION OF ELECTRICAL CONDUCTIVITY AND PHYSICAL HYDRAULIC PARAMETERS OF SOILS UNDER DIFFERENT USES IN AN ALLUVIAL VALLEY
RESUMO A caracterização da estrutura de variabilidade espacial de propriedades hidráulicas e da salinidade do solo é de grande importância para um adequado manejo agrícola de vales aluviais e para proteção da vegetação ciliar. Dessa forma, o objetivo deste trabalho foi a verificação da precisão de medições indiretas da condutividade elétrica
Rev. Caatinga. Publicado em: 09/05/2019
-
31. SOIL CHEMICAL PROPERTIES IN BANANA CROPS FERTIGATED WITH TREATED WASTEWATER
RESUMO Estabelecer os efeitos da aplicação de águas residuárias nos atributos químicos do solo permite o reúso agrícola seguro desses efluentes. Objetivou-se avaliar as alterações nos atributos químicos de um Latossolo no semiárido, cultivado com banana 'Prata-Anã' fertirrigada com diferentes doses de água residuária sanitária após tratamento
Rev. Caatinga. Publicado em: 09/05/2019
-
32. Contrastive Research on Electrical Contact Performance for Contact Materials of Cu-SnO2 and Cu-ZnO2 Alloys
Herein, SnO2- and ZnO2-doped (1.5 wt.%) composite Cu powder was prepared by mechanical alloying (MA) respectively, and both the contact materials of oxide-doped Cu alloys were subsequently obtained by canned hot-pressing powder sintering with hot extrusion combined. Scanning electron microscopy (SEM), laser scanning confocal microscopy (LSCM) and self-design
Mat. Res.. Publicado em: 25/04/2019
-
33. Surface modification of activated carbon by corona treatment
Surface modification may lead activated carbon (AC) to take on different properties. This study aimed to promote surface modification of activated carbons using corona treatment (electrical discharge). In this study, powdered commercial activated carbon was used. Activated carbons were subjected to corona treatment at different exposure times (2, 5, 8 and 10
An. Acad. Bras. Ciênc.. Publicado em: 21/03/2019
-
34. The Modification of (Nd0.5Ta0.5)4+ Complex-Ions on Structure and Electrical Properties of Bi0.5Na0.5TiO3-BaTiO3 Ceramics
The (Bi0.5Na0.5)0.94Ba0.06Ti1-x (Nd0.5Ta0.5) xO3 (0.01≤x≤0.05) lead-free ceramics (BNBT-xNT) used (Nd0.5Ta0.5)4+ complex-ions to modify its structure and electrical properties. The BNBT-xNT ceramics exhibit the coexistence of tetragonal and rhombohedral phase. The (Nd0.5Ta0.5)4+ complex-ions prohibit grain growth, and its average grain size decreases fro
Mat. Res.. Publicado em: 14/03/2019
-
35. Temperature Dependence of Electrical Resistance in Ge-Sb-Te Thin Films
Nowadays, the Ge-Sb-Te system is studied extensively for use in the field of both electrical and optical non-volatile memories. The key of this application is based on the changes in the physical properties (electrical conductivity or refractive index) of these films as a result of structural transformation between amorphous and crystalline states. Both stat
Mat. Res.. Publicado em: 18/02/2019
-
36. Nb-doped Ti2O3 Films Deposited Through Grid-Assisted Magnetron Sputtering on Glass Substrate: Electrical and Optical Analysis
Abstract Niobium doped dititanium trioxide (Ti2O3:Nb) films were deposited on glass substrates, through grid-assisted magnetron sputtering. The Ti2O3:Nb films were characterized by X-ray diffraction (XRD), electrical conductivity and optical properties. Film deposition was carried out in two different substrate bias modes: DC and unipolar pulsed. Results sho
Mat. Res.. Publicado em: 24/01/2019