Dynamic High Pressure
Mostrando 1-12 de 96 artigos, teses e dissertações.
-
1. Application of self-organizing maps to evaluate the influence and behavior of the film formed during salting of Prato cheese
Abstract Problems related to high blood pressure have led consumers to choose foods with low levels of sodium chloride, and an alternative to reduce the salt content of this salt is its partial replacement with KCl. In order to not affect the sensory properties of cheese, salting was performed using a solution containing 70% of NaCl and 30% of KCl in a stati
Food Sci. Technol. Publicado em: 2020-12
-
2. Aço de alta dureza para aplicação balística: propriedades mecânicas
RESUMO Blindagens balísticas são projetadas a resistir determinadas ameaças, que dependem da aplicação. Estas ameaças podem ser geradas por projéteis de armas de fogo ou estilhaços provenientes de explosões com diferentes energias cinéticas. Os materiais normalmente utilizados para este propósito são metálicos, não metálicos e compósitos, sen
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Pastas de ultra-alto desempenho submetidas a cura sob pressão
Resumo A aplicação de pressão em misturas cimentícias tem efeitos positivos no desenvolvimento da microestrutura e nas propriedades mecânicas da matriz endurecida. Contudo, os benefícios têm sido estudados em níveis altos de pressão ou combinados com cura térmica. Este artigo está inserido em uma pesquisa em que foi proposto um equipamento alterna
Ambient. constr.. Publicado em: 10/06/2019
-
4. Experimental study of brass properties through perforation tests using a thermal chamber for elevated temperatures
Abstract Experimental analysis on standard brass alloy has been carried out using a high pressure gas gun. Perforation tests have been performed for a variety of impact velocities from 40 to 120 m/s in order to study the material behaviour and to define failure modes. The main aim of the study has been to provide results using an innovative thermal chamber t
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
5. Cardiorespiratory and metabolic determinants during moderate and high resistance exercise intensities until exhaustion using dynamic leg press: comparison with critical load
The objective of this study was to assess cardiovascular, respiratory, and metabolic responses during a commonly used dynamic leg press resistance exercise until exhaustion (TEx) at different intensities and compare with critical load (CL). This was a prospective, cross-sectional, controlled, and crossover study. Twelve healthy young men (23±2.5 years old)
Braz J Med Biol Res. Publicado em: 11/10/2018
-
6. Simulación matemática para la optimización del patrón de flujo entregado por una buza para el molde de colada continua de planchón delgado
ABSTRACT Understanding the behavior of the oscillations of the jets into the mold of thin slab funnel is essential to ensure a constant supply of liquid steel, improve control of the flow patterns and consequently increase plant productivity and the final product quality. To achieve this, we conducted a study of the effect of the internal design of the nozzl
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Dynamic crack propagation of granite subjected to biaxial confining pressure and blast loading
Abstract To great understanding the dynamic crack propagation of rock under in-situ stress and blasting, the static-dynamic loading experimental platform was built. With different confining pressure (0MPa, 2MPa, 4MPa, 6MPa, 8MPa) and different ratios (K) of horizontal-to-vertical pressure (0, 0.25, 0.5, 0.75, 1), nine texts have been carried out in quadrate
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
8. Laboratory study of dynamic mechanical characteristic of granite subjected to confining pressure and cyclic blast loading
Abstract To investigate the deformation characteristic of deep rock under cyclic blasting, the static-dynamic loading experimental equipment was set up. The dynamic strain gauges and high-speed (HS) camera were adopted to obtain strain field and the crack propagation of rock under confining pressure of 0 MPa, 5 MPa and 10 MPa. Under the one-time loading fro
Lat. Am. j. solids struct.. Publicado em: 28/06/2018
-
9. Dynamic Properties of High Volume Fly Ash Nanosilica (HVFANS) Concrete Subjected to Combined Effect of High Strain Rate and Temperature
Abstract The study aims to determine the dynamic properties of high volume fly ash nanosilica (HVFANS) concrete exposed to strain rates between 30.12 to 101.42 s-1 and temperatures of 25, 400, and 700 oC by using split Hopkinson pressure bar (SHPB) machine. The static and dynamic compressive strengths of HVFANS concrete were slightly lower than plain concre
Lat. Am. j. solids struct.. Publicado em: 23/04/2018
-
10. Microstructure and Hardness Evolution in Magnesium Processed by HPT
High pressure torsion provides an opportunity to process materials with low formability such as magnesium at room temperature. The present work shows the microstructure evolution in commercially pure magnesium processed using a pressure of 6.0 GPa up to 10 turns of rotation. The microstructure evolution is evaluated using electron microscopy and the hardness
Mat. Res.. Publicado em: 12/09/2017
-
11. Strain Rate Dependent Behavior and Modeling for Compression Response of Hybrid Fiber Reinforced Concrete
Abstract This paper investigates the stress-strain characteristics of Hybrid fiber reinforced concrete (HFRC) composites under dynamic compression using Split Hopkinson Pressure Bar (SHPB) for strain rates in the range of 25 to 125 s-1. Three types of fibers - hooked ended steel fibers, monofilament crimped polypropylene fibers and staple Kevlar fibers were
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
12. Experimentally Validated Combustion and Piston Fatigue Life Evaluation Procedures for the Bi-Fuel Engines, Using an Integral-Type Fatigue Criterion
Abstract A relatively complete procedure for high cycle fatigue life assessment of the engine components is outlined in the present paper. The piston is examined as a typical component of the engine. In this regard, combustion process and transient heat transfer simulations, determination of the instantaneous variations of the pressure and temperature in the
Lat. Am. j. solids struct.. Publicado em: 2016-06