Laboratory study of dynamic mechanical characteristic of granite subjected to confining pressure and cyclic blast loading
AUTOR(ES)
He, Chenglong, Yang, Jun
FONTE
Lat. Am. j. solids struct.
DATA DE PUBLICAÇÃO
28/06/2018
RESUMO
Abstract To investigate the deformation characteristic of deep rock under cyclic blasting, the static-dynamic loading experimental equipment was set up. The dynamic strain gauges and high-speed (HS) camera were adopted to obtain strain field and the crack propagation of rock under confining pressure of 0 MPa, 5 MPa and 10 MPa. Under the one-time loading from cylindrical charge, the cracks in crushed zone were generated by shear and tensile failure. Circumference compressive stress is formed around borehole by confining pressure, and it reduces the circumference tensile failure by blast loading. The number of radial cracks and broken radius reduce with confining pressure increase. The reflected stress wave drives the existing fissures further developing. When specimens subjected to cyclic loading from PETN Cord, the rock is controlled by elastic deformation and no damage appeared after the first loading. With the cycle-index increase, the accumulation of plastic strain is observably when the strain exceeds the elastic limit strength of rock. The cumulative damage is nonlinear increased under cyclic loadings. The existing flaws or radial cracks run through specimen when the cumulative damage exceeds the material's yield strength.
Documentos Relacionados
- Dynamic crack propagation of granite subjected to biaxial confining pressure and blast loading
- A study on the response of single and double circular plates subjected to localised blast loading
- Behavior of granite-epoxy composite beams subjected to mechanical vibrations
- Study on Dynamic Compressive Mechanical Properties and Failure Modes of Heat-Treated Granite
- A numerical simulation of metallic cylindrical sandwich shells subjected to air blast loading