Ductility
Mostrando 13-24 de 134 artigos, teses e dissertações.
-
13. EXPERIMENTAL INVESTIGATION ON CONCRETE FILLED STEEL TUBULAR COLUMN TO FOUNDATION CONNECTIONS SUBJECTED TO COMBINED AXIAL AND LATERAL CYCLIC LOADING
Abstract This study focuses on performance of CFT column to foundation connections subjected to combined axial and lateral cyclic loading. Experimental investigations were carried out on five specimens with exposed column base and embedded column base connections. The parameters considered were number of stiffeners and embedment depth of CFT column. The forc
Lat. Am. j. solids struct.. Publicado em: 01/07/2019
-
14. PM versus IM Ti-5Al-5V-5Mo-3Cr Alloy in Mechanical Properties and Fracture Behaviour
The comparisons of mechanical properties and fracture behaviour between as-consolidated PM Ti-5553 alloy and as-cast IM Ti-5553 alloy were investigated through tensile, fracture toughness and impact toughness tests in this research. The slightly higher strength but much higher ductility and toughness can be identified in IM alloy specimens, which is also con
Mat. Res.. Publicado em: 27/06/2019
-
15. Experimental Studies on Shear Resistance Performances for the Shear key of H Shape Steel Spatial Grid Roofs
Abstract In this paper, a new type of structure was introduced. The spatial steel grid structure was composed of the top layer, lower layer H-shaped steel ribs and square steel tubes. The shear key is the key part of the structure.Based on the real dimensions of a practical prototype,two sets of full-scale shear key specimens were made, one of which has vert
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
16. On the mechanical behavior of an Al 7075 alloy deformed by asymmetrical and conventional rolling
ABSTRACT Samples of the Al 7075 naturally and artificially aged were processed by conventional and asymmetrical rolling with 5% of thickness reduction. The rolling processes were evaluated under room temperature and under warm condition (130°C). Mechanical properties were evaluated by uniaxial tensile and Vickers microhardness tests. Microstructure evolutio
Matéria (Rio J.). Publicado em: 20/05/2019
-
17. Mechanical Properties and Microstructural Evolution of CuZn Alloys via Pre-Torsional Deformation
Mechanical properties and microstructural evolution of Cu-10wt.%Zn and Cu-30wt.%Zn alloys after pre-torsional deformation have been investigated in this study. The results indicated that pre-torsional deformation can significantly enhance the strength of both Cu-10wt.%Zn and Cu-30wt.%Zn alloys without changing their shape and size, but with the sacrifice of
Mat. Res.. Publicado em: 18/04/2019
-
18. Mechanical Behavior of Multiwalled Carbon Nanotube Reinforced 7075 Aluminum Alloy Composites Prepared by Mechanical Milling and Hot Extrusion
In this paper, multiwalled carbon nanotubes (MWCNTs) were synthesized by spray pyrolysis to be used later as material reinforcement in the production of MWCNTs/Al7075 aluminum composites. Both, MWCNTs and MWCNTs/Al7075 composites were microstructurally and mechanically characterized. Scanning electron microscopy (SEM) analysis shows MWCNTs formed by multiple
Mat. Res.. Publicado em: 31/01/2019
-
19. Crystallization, thermal and mechanical behavior of oligosebacate plasticized poly(lactic acid) films
Abstract The biodegradable aliphatic oligoester oligo(trimethylene separate) (OTS) was synthesized by polycondensation and used to plasticize poly(lactic acid) (PLA). Casting films of PLA and PLA/OTS with concentrations of 1, 5 and 10 wt.% were prepared, and these films were characterized by thermal analyses, crystallinity, rheology and mechanical tests. DS
Polímeros. Publicado em: 29/11/2018
-
20. Experimental and numerical study of I-shape slit dampers in connections
Abstract This paper proposes a new beam to column connection which has slit dampers to increase ductility and moment capacity of structures. After Northridge and Kobe earthquakes, many researchers have tried to achieve more ductile connections. Ductility of connections causes to dissipate more energy before failure of connections. Also, some researchers have
Lat. Am. j. solids struct.. Publicado em: 14/11/2018
-
21. The Effectiveness of Back Pressure in Superplastic Blow Forming of Aluminum Alloy AA 5083 Performed at Very Favorable Conditions for Cavitation Growth
Many components for aerospace and automotive industries are currently manufactured using superplastic forming, being the fine-grained aluminum alloy AA5083 widely used for this proposes. However, the development of cavitation voids is inherent in this process and reduces the ductility of the alloy. Back pressure can be used to diminish the growth of cavitati
Mat. Res.. Publicado em: 26/07/2018
-
22. Simulación computacional de un ensayo Erichsen aplicado a una chapa de acero DC-06
ABSTRACT Nowadays, the use of computer simulation on forming processes as stamping and its variants, is an habitual development activity of big industries, and also it is slowly being introduced in SME (Small and Mediumsize Enterprise). One of the main advantages of it is application lies-in the reduction of costs regarding new projects, products and process
Matéria (Rio J.). Publicado em: 19/07/2018
-
23. Monitoreo mediante Emisión Acústica de vigas de hormigón de alta resistencia con y sin fibras expuesto a alta temperatura
ABSTRACT The addition of fibers to the cementitious matrix, giving rise to fiber-reinforced concrete, aims to improve the low ductility observed in concrete mechanical response under different load scenarios, particularly under direct tension. In this work, cracking and mechanical degradation processes of concrete elements using acoustic emission technique a
Matéria (Rio J.). Publicado em: 19/07/2018
-
24. Determinación de los parámetros de austenización intercrítica para el desarrollo de aceros multifásicos mediante análisis dilatométrico
ABSTRACT The Multiphase steels are materials with exceptional mechanical properties including high strength, excellent ductility and hardening coefficient and good conformability. These properties are related with the microstructure, which can be a combination of ferrite and martensite (Dual phase steels) or more complex microstructures with ferrite, bainite
Matéria (Rio J.). Publicado em: 19/07/2018