Drilling Fluids
Mostrando 1-12 de 43 artigos, teses e dissertações.
-
1. Avaliação de amidos modificados empregados na mineração para aplicação em fluidos de perfuração de poços de petróleo
RESUMO Amidos e seus derivados são utilizados em praticamente todos os setores industriais. Na indústria petrolífera podem ser empregados como aditivos controladores de filtrado, os quais controlam eficazmente a perda de fluido para a formação rochosa adjacente. O presente trabalho teve como objetivo avaliar o uso de amidos, de mandioca e de milho, util
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Influence of reactivity and mineralogical composition on instability due to the disintegration of shales from Paraíba and Ceará States, Brazil
Resumo Este trabalho teve como objetivo correlacionar a reatividade e composição mineralógica de folhelhos à sua desintegração. Para tanto, foram caracterizadas cinco amostras de folhelho das Bacias do Rio do Peixe e Araripe, localizadas nos estados brasileiros da Paraíba e Ceará e, para fins de comparação, foi utilizada uma amostra de argila bento
Cerâmica. Publicado em: 15/08/2019
-
3. Influence of Ca2+ in the rheological properties and filtration of bentonitic clay dispersions in aqueous drilling fluids
Resumo As características físico-químicas dos cátions podem ser capazes de modificar as propriedades reológicas das argilas bentoníticas, como suas cargas, tamanhos dos cátions trocáveis adsorvidos nos argilominerais, comportamentos de hidratação e diferentes intercalações com as camadas estruturais da bentonita, sendo um fator importante conside
Cerâmica. Publicado em: 06/06/2019
-
4. Evaluación reológica de fluidos de perforación base agua con nanosílice
ABSTRACT Generally, drilling fluids may be defined as fluids with a composition that can assist the generation and removal of cuttings from the borehole to the surface. They are classified according to their base as water based mud (WBM), oil based mud (OBM) or gas. Polymers, densifiers, brines, surfactants, among others are the primary components of drillin
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Study of Continuous Rheological Measurements in Drilling Fluids
Abstract Drilling an oil well involves using drilling fluids that perform cleaning and cooling functions, but that most importantly maintain the fluids of the geological formation contained by hydraulic pressure. A fundamental role in predicting the hydraulic pressure of the well consists of monitoring the fluid’s rheological behavior. This paper summarize
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
6. Rheological Characterization of Bentonite Dispersions with Xanthan for Oil Well Drilling Fluids
Shear tests using a coaxial cylinders viscometer were performed in order to determine the rheological and thixotropic properties of xanthan gum dispersions with sodium bentonite in the presence of high salt concentrations of sodium and calcium chlorides. The dispersions rheology with different temperatures and concentrations of NaCl, CaCl2 and xanthan gum we
Mat. Res.. Publicado em: 05/06/2017
-
7. AVALIAÇÃO DO POTENCIAL USO DE BIOGLICERINA COMO BASE PARA FORMULAÇÃO DE FLUIDOS DE PERFURAÇÃO AQUOSOS PARA POÇOS DE PETRÓLEO E GÁS
The growing global concern about the environment associated with academic and government efforts are enabling a number of alternatives for sustainable development. Within this perspective one can include the search for value-added products using waste from renewable energy sources, such as those from the production of biodiesel. The rapid development of biod
Quím. Nova. Publicado em: 2017-05
-
8. SMART MONITORING AND DECISION MAKING FOR REGULATING ANNULUS BOTTOM HOLE PRESSURE WHILE DRILLING OIL WELLS
Abstract Real time measurements and development of sensor technology are research issues associated with robustness and safety during oil well drilling operations, making feasible the diagnosis of problems and the development of a regulatory strategy. The major objective of this paper is to use an experimental plant and also field data, collected from a basi
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
9. NUMERICAL INVESTIGATION OF NON-NEWTONIAN DRILLING FLUIDS DURING THE OCCURRENCE OF A GAS KICK IN A PETROLEUM RESERVOIR
Abstract In this work, a simplified kick simulator is developed using the ANSYS® CFX software in order to better understand the phenomena called kick. This simulator is based on the modeling of a petroleum well where a gas kick occurs. Dynamic behavior of some variables like pressure, viscosity, density and volume fraction of the fluid is analyzed in the fi
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
10. MODELING AND ANALYSIS OF UNSTEADY FLOW BEHAVIOR IN DEEPWATER CONTROLLED MUD-CAP DRILLING
Abstract A new mathematical model was developed in this study to simulate the unsteady flow in controlled mud-cap drilling systems. The model can predict the time-dependent flow inside the drill string and annulus after a circulation break. This model consists of the continuity and momentum equations solved using the explicit Euler method. The model consider
Braz. J. Chem. Eng.. Publicado em: 2016-03
-
11. The effect of the inner cylinder rotation on the fluid dynamics of non-Newtonian fluids in concentric and eccentric annuli
Helical flow in an annular space occurs during oil drilling operations. The correct prediction of flow of drilling fluid in an annular space between the wellbore wall and the drill pipe is essential to determine the variation in fluid pressure within the wellbore. This paper presents experimental and CFD simulation results of the pressure drop in the flow of
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
12. Invasão de fluidos de perfuração e fluxo reverso de óleo em reservatórios de arenito e de carbonato / Invasion of drilling fluids and oil backflow in sandstone and carbonate reservoirs
As recentes descobertas do pré-sal no Brasil trouxeram novos desafios para as atividades de explotação de petróleo. Perfuração em formações carbonáticas apresentam grandes diferenças em relação a perfurações em rochas areníticas. Enquanto arenitos são mais homogeneos, rochas carbonáticas podem apresentar significativas variações em relaç�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2012