Drilling Fluids
Mostrando 13-24 de 43 artigos, teses e dissertações.
-
13. Influência da argila na invasão de fluidos de perfuração em reservatórios de petróleo / Clay influence on drilling fluids invasion in petroleum reservoir
A perfuração de poços de petróleo pode danificar fortemente a formação, incluindo a região de interesse: o reservatório. Perfurar sem que se danifique o reservatório caracteriza-se como um grande desafio, e por isso, tem sido estimulado o desenvolvimento de tecnologias de fluidos e otimização de processos de perfuração, incluindo, por exemplo, o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2012
-
14. Influence of EP additive on tool wear in drilling of compacted graphite iron
Compacted Graphite Iron (CGI) is a good option for the manufacturing of engine blocks, because of the possibilities to decrease the wall thickness and to operate at higher pressures. However, due to its greater tensile strength and hardness compared with grey cast iron, the pearlitic CGI structure makes its machining more difficult. Thus, the aim of this pap
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-06
-
15. Empirical study regarding the effects of minimum quantity lubricant utilization on performance characteristics in the drilling of Al 7075
Cutting fluids are difficult and expensive to recycle. These drawbacks mentioned can be reduced or eliminated by performing the cutting operations with minimum quantity lubrication or without using any cutting fluid. In this study, the effects of different cutting parameters on performance characteristics are studied empirically during the drilling of Al7075
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-03
-
16. Estudo do comportamento PVT de misturas de metano e fluidos de perfuração base éster / Study of the PVT behavior of methane and ester based drilling fluids mixtures
During conventional drilling operations, it is necessary to maintain the wellbore pressure greater than the reservoir pore pressure, otherwise a kick may occur. If the well control procedure is not effective during the circulation of the formation influx out of the well, a blowout could happen, which is a dangerous event concerning safety and environmental i
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/06/2010
-
17. EXPERIMENTAL EVALUATION OF TRANSPORT PARAMETERS IN SHALES / AVALIAÇÃO EXPERIMENTAL DOS PARÂMETROS DE TRANSPORTE EM FOLHELHOS
The majority of the problems related to wellbore stability occur when argillaceous rocks, such as shales, are drilled. Such problems are believed, in general, to be caused by the physical-chemical interaction between drilling fluids and the referred rocks. This dissertation focuses on the experimental study of the behavior of shales exposed to different sali
Publicado em: 2010
-
18. LIQUID-LIQUID DISPLACEMENT FLOWS IN A HELE-SHAW CELL INCLUDING NON-NEWTONIAN EFFECTS / DESLOCAMENTO DE LÍQUIDOS EM CÉLULA DE HELE-SHAW CONSIDERANDO EFEITOS NÃO NEWTONIANOS
This work studied the displacement of fluids in porous media using a Hele-Shaw cell. Specifically, was investigated experimentally the displacement of a non-Newtonian fluid by a Newtonian in a rectangular Hele-Shaw cell. The Saffman-Taylor or viscous fingering instability occurs when one fluid pushes a more viscous one, and a Hele-Shaw is a convenient tool t
Publicado em: 2010
-
19. Burr produced on the drilling process as a function of tool wear and lubricant-coolant conditions
This work shows the resulting height and shape of the burrs produced by drilling holes with ratio L/D = 3. The tool used in the tests was the solid twist HSS drill coated with TiAlN, with diameter of 10 mm, to drill the microalloyed steel DIN 38MnS6. The height of the burr was studied under different lubricant/coolant systems, namely: dry machining, use of M
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-03
-
20. Modificação química de argilas: desafios científicos e tecnológicos para obtenção de novos produtos com maior valor agregado
Chemical modification of clays is possible due to their ion-exchange and adsorption capacities, which allows the adjustment of the physicochemical properties of the surfaces of their layers. This modification makes possible the use of clays to produce a great number of new materials, which range from coarse applications such as oil based drilling fluids to r
Quím. Nova. Publicado em: 2009
-
21. Avaliação da perda de carga e do fator de atrito no escoamento de fluidos de perfuração em geometrias circular e anulares concêntricos / Load loss and friction factor in the disposal of drilling fluids in circular geometry and concentric rings
The constant search for new technologies of drilling oil wells has reinforced the research and development of drilling fluids and the specific study of their disposal, particularly with regard to the load loss caused by the different geometries. Within this context, this study focused on the load loss and friction factor in the disposal of the drilling fluid
Publicado em: 2008
-
22. Efeito do BÃrio e CÃdmio no desenvolvimento populacional de Pellioditis marina ( Bastian, 1865) ( Nematoda, Rhabtidae) e Diplollaimeloides oschei Meyl, 1954 ( Nematoda, Monhysteridae)
Oil and gas drilling activities usually involve the use of fluids that contain several heavymetals, among those, barium and cadmium, which can affect the biota from the surrounding area. Nematodes are the most abundant metazoan, and play an important role on the food web and in the carbon flux. The aim of this work was to analyze the population development o
Publicado em: 2008
-
23. Modelagem de controle de poço com fluidos de perfuração não aquosos e estudos de casos / Nonaqueous drilign fluid well control modeling and case studies
O trabalho apresenta uma revisão da literatura sobre poços HPHT, abordando o desafio na construção dos mesmos, com ênfase no aspecto de segurança de poço. Do ponto de vista de desenvolvimento, o trabalho envolveu a implementação de um modelo de controle de poços com fluidos de perfuração não aquosos em software existente (Unikick), que incorpora
Publicado em: 2008
-
24. Avaliação e modelagem reológica de fluido de perfuração base água
A determinação do comportamento reológico dos fluidos de perfuração é de fundamental importância para se determinar a melhor composição e o melhor tratamento a ser aplicado nesses fluidos. Este trabalho apresenta um estudo sobre o comportamento reológico de aditivos utilizados como viscosificantes em fluidos de perfuração de base água. Os aditiv
Publicado em: 2008