Dendritic Structure
Mostrando 1-12 de 82 artigos, teses e dissertações.
-
1. Effect of Extrusion and Heat Treatment on Microstructure and Mechanical Properties of Hypereutectic A390-0.3wt%Nd Alloy
An hypereutectic aluminium alloy with a composition of 16-18wt%Si, 4-5wt%Cu, 0.45-0.65wt%Mg, 0.3wt%Nd and Al balance (A390-0.3wt%Nd alloy) was processed by extrusion and aging at 200ºC for 10 hours. The effect of the thermomechanical processing and heat treatment on microstructure and mechanical properties was investigated for A390-0.3wt%Nd alloy. It was sh
Mat. Res.. Publicado em: 10/06/2019
-
2. Effect of Solid Solution + Double Ageing on Microstructure and Properties in the Layer by Layer of the Z-Y Interface of Inconel 718 alloys Fabricated by SLM
The microstructure in the Z-Y surface of Inconel 718 alloys fabricated by selective laser melting (SLM) shows the relatively homogeneous and irregular fine grain structure after the heat treatment process of 1050ºC solid solution + double ageing. A large number of bulk precipitates were observed on the grain boundary, and the typical dendritic crystallizati
Mat. Res.. Publicado em: 11/10/2018
-
3. An Experimental Study of the Solidification Thermal Parameters Influence upon Microstructure and Mechanical Properties of Al-Si-Cu Alloys
Metals solidification involves the transformation of the molten metal back into the solid state. Solidification structures impact heavily on the final product's characteristics. The microstructure effects on metallic alloys properties have been highlighted in various studies and particularly the dendrite arm spacing influence upon the mechanical properties s
Mat. Res.. Publicado em: 18/06/2018
-
4. Correlations of microstructure and mechanical properties of the ternary Sn-9wt%Zn-2wt%Cu solder alloy
The microstructure length-scales (dendritic and eutectic), morphologies and tensile properties of a ternary Sn-9wt.%Zn-2wt.%Cu alloy are compared with those of a binary eutectic Sn-9wt.%Zn alloy. The following experimental/analytical steps were performed: transient directional solidification experiments of the Sn-9wt.%Zn-2wt.%Cu alloy; measurements of second
Mat. Res.. Publicado em: 11/01/2018
-
5. Microstructural characterization of the A356 alloy in different processing routes used in the thixoforming process
ABSTRACT This work aims to evaluate different routes of raw material production to be used in thixoforming process. The semisolid materials exhibit particular structural characteristics, such the characteristic non dendritic structure. The studies for the production of near-net-shape parts have progressed together with the studies of material weight reductio
Matéria (Rio J.). Publicado em: 02/10/2017
-
6. Predicting Secondary-Dendrite Arm Spacing of the Al-4.5wt%Cu Alloy During Unidirectional Solidification
Mechanical properties and performance of metallic materials depend on their microstructures. In order to develop engineering materials that match prescribed criteria and to enable design with multifunctional materials, it is essential to be able to predict their microstructural patterns, such as size, shape, and spacing of the dendritic structures observed i
Mat. Res.. Publicado em: 24/11/2016
-
7. Effect of phase transformations on hardness in Zn-Al-Cu Alloys
Sixteen Zn-Al-Cu alloy compositions were prepared by melting pure elements. The as-cast alloys were homogenized at 350 °C for 180 h. Both the as-cast and homogenized alloys were analyzed with X-ray diffractometer and EDX-scanning electron microscope. The Rockwell “B” hardness of both the as-cast and homogenized alloys was determined using the standard p
Mat. Res.. Publicado em: 22/09/2014
-
8. Efeitos da restrição proteica gestacional em hipocampo de ratos machos adultos : avaliação da estrutura dendrítica tridimensional, do comportamento e de componentes neuroquímicos = Effects of gestational protein restriction in hippocampus of adult male rats / Effects of gestational protein restriction in hippocampus of adult male rats : evaluation of three-dimensional dendritic structure of hippocampal neurons, behavior and neurochemical components
Studies have demonstrated that maternal nutritional restriction during pregnancy or in early postnatal life results in hippocampus cognitive impairment and structural abnormalities in the 16-wk-old offspring. In an attempt to analyze whether gestational protein restriction might induce learning and memory impairment associated with structural changes in the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/07/2012
-
9. Rapid solidification of an Al-5Ni alloy processed by spray forming
Recently, intermetallic compounds have attracted much attention due to their potential technological applications as high-temperature materials. In particular the intermetallic compounds, associated with the Al-Ni binary system stand out as promising candidates for high-temperature materials for the use in harsh environments. It is expected that a bulk Al-Ni
Mat. Res.. Publicado em: 08/05/2012
-
10. Expression of non-TLR pattern recognition receptors in the spleen of BALB/c mice infected with Plasmodium yoelii and Plasmodium chabaudi chabaudi AS
The spleen plays a crucial role in the development of immunity to malaria, but the role of pattern recognition receptors (PRRs) in splenic effector cells during malaria infection is poorly understood. In the present study, we analysed the expression of selected PRRs in splenic effector cells from BALB/c mice infected with the lethal and non-lethal Plasmodium
Mem. Inst. Oswaldo Cruz. Publicado em: 2012-05
-
11. Phase transformations in an AISI 410S stainless steel observed in directional and laser-induced cooling regimes
The applications of the chromium ferritic stainless steel AISI 410S have been considerably increased in the last years in many technical fields as chemical industries and oil or gas transportation. However, the phase transformation temperatures are, currently, unknown for this alloy. The aim of this work is to determine the alpha to gamma transformation temp
Materials Research. Publicado em: 31/01/2012
-
12. Efeito da Taxa de Resfriamento e dos Tratamentos Térmicos sobre as Propriedades Mecânicas da Liga Al-Si-Mg (A356.0) Fundida / Efeito da Taxa de Resfriamento e dos Tratamentos Térmicos sobre as Propriedades Mecânicas da Liga Al-Si-Mg (A356.0) Fundida
The A356.0 alloy is widely used in aerospace and automotive industry and other structural applications which require high mechanical strength. The control of solidification cooling rate and heat treatments are necessary to obtain more appropriate microstructures resulting in improvement of their properties. In this paper was evaluated the influence of coolin
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/12/2011