Cyclic Voltammetry
Mostrando 25-36 de 273 artigos, teses e dissertações.
-
25. Facile One-Step Electrodeposition Fabrication of Amorphous MoS2 Catalysts in Titanium for Hydrogen Evolution Reaction
Hydrogen is seen as a future energy carrier that will assist the global energy fuel demand. However, it is still necessary to study efficient and inexpensive catalysts that can be used on a large scale to make this technology practical. In this paper the electrodeposition of molybdenum disulfide (MoS2) film on titanium (Ti) substrate was performed by cyclic
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
26. Uncured Polydimethylsiloxane as Binder Agent for Carbon Paste Electrodes: Application to the Quantification of Propranolol
This study describes the use of uncured polydimethylsiloxane (PDMS) as a binder agent to prepare carbon paste electrodes (CPEs). A comparative study between the properties of CPEs prepared with PDMS and mineral oil Nujol®, the most common binder agent for CPEs, was carried out. Cyclic voltammetry, electrochemical impedance spectroscopy, and chronoamperometr
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
27. Development and Characterization of PbI2 Nanoparticles for all Solid-State Flexible Supercapacitor Purposes
The development and utilization of new energy sources has been extensively studied in the world. Here, we report the development of flexible self-supported metal-free electrodes based on non-oxidized graphene multilayer (MLG) paper containing the lead iodide nanoparticles (PbI2-NPs). The PbI2-NPs was obtained and characterized by X-ray diffraction (XDR) and
Mat. Res.. Publicado em: 20/05/2019
-
28. Influência da adição de Sn na resistência à corrosão e na capacidade de recarga da liga Pb-1,5%Sn para grade positiva de baterias chumbo-ácido
RESUMO O presente trabalho teve como objetivo avaliar o processo de corrosão do Pb e da liga Pb-1,5%Sn quando submetidos à condição de ciclagem em meio de ácido sulfúrico, visando compreender a influência da adição de Sn na resistência à corrosão e na capacidade de recarga para grades positivas de baterias do Pb-ácido. As amostras de estudo fora
Matéria (Rio J.). Publicado em: 20/05/2019
-
29. New Synthesis Method for a Core-Shell Composite Based on α-Bi2O3 @PPy and its Electrochemical Behavior as Supercapacitor Electrode
New composite based on polypyrrole (PPy) and bismuth oxide (α-Bi2O3) was investigated as supercapacitor electrode. The α-Bi2O3 was obtained by hydrothermal route at 500 ºC for 2 h. Cyclic voltammetry was used to electropolymerize PPy on graphite electrode (GE) or on GE/α-Bi2O3. The X-ray diffraction profile of Bi2O3 revealed the α-Bi2O3 monoclinic struc
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
30. Influence of Electrooxidation of Ni Wire Electrodes on the Kinetics of Oxygen Evolution Reaction Studied in 0.1 mol dm-3 NaOH
This work reports on oxygen evolution reaction (OER), studied at nickel wire electrode material. Electrocatalytic behavior of non-oxidized and electrooxidized Ni wire samples was evaluated in 0.1 mol dm-3 NaOH solution for the potential range: 1600-2000 mV vs. RHE. The performance of nickel electrodes was examined by alternating current (a.c.) impedance spec
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
31. Recombination Study of Dye Sensitized Solar Cells with Natural Extracts
Natural dyes can be used in dye sensitized solar cells (DSSCs) to generate low-cost devices, although with low light harvesting because of energy losses from the recombination process. This study investigates recombination reactions in DSSCs with natural dyes extracted from eggplants, plums, and hibiscus flowers. Titanium dioxide films were coated on a fluor
J. Braz. Chem. Soc.. Publicado em: 2019-02
-
32. Ag@Activated Carbon Felt Composite as Electrode for Supercapacitors and a Study of Three Different Aqueous Electrolytes
The main challenge for the development of a high efficiency supercapacitor is the electrode material. Developing electrode materials with high specific electrical capacitance and low electrical resistance enables an increase in the energy accumulated in the device. In addition, it is expected that the electrode material presents a simple procedure for prepar
Mat. Res.. Publicado em: 08/11/2018
-
33. Evaluating the Electrochemical Characteristics of Babassu Coconut Mesocarp Ethanol Produced to Be Used in Fuel Cells
The aim of the present study is to assess the potential of ethanol deriving from the mesocarp of babassu coconut to be used in fuel cells. Babassu ethanol was generated through hydrolysis and fermentation processes. The Pt, PtRh and PtRu electrodes were prepared in carbon Vulcan XC72R through the reduction method and applied as electrocatalysts in ethanol ox
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
34. Determinación del área de superficie real de electrodos de titanio modificado con platino por voltamperometría cíclica
ABSTRACT The surface area of Ti/TiO2-Pt electrodes (ASr) in contact with 0.010 M HClO4 solutions was determined by Cyclic Voltammetry (CV) and Atomic Force Microscopy (AFM) techniques. The Ti/Pt/TiO2 electrodes with different amounts of electrodeposited Pt (1, 5 and 10 seconds) were polarized up to 1.5 V vs. Ag/AgCl (sat. KCl) and stabilized at the final pot
Matéria (Rio J.). Publicado em: 19/07/2018
-
35. Nanoestructura de perovskita doble La2NiMnO6 obtenido por ruta de citrato para supercapacitores
ABSTRACT In this paper, the study of double perovskite La2NiMnO6 as electrode material for supercapacitors is presented. The mixed oxide was prepared by citrate precursor route (CIT). The sample was calcined for 4 hours at 800 °C. The material was characterized by PXRD, SEM and FTIR spectroscopy. Cyclic voltammetry and galvanostatic charge/discharge measure
Matéria (Rio J.). Publicado em: 19/07/2018
-
36. Efecto de la concentración del silano MTMO sobre la protección contra la corrosión de acero electrocincado
ABSTRACT Superficial pretreatments based on silanes are one of the prominent alternatives to replace chromates as temporary protectors from the action of aggressive environments to metallic substrates. The barrier effect afforded by the silane film makes porosity, thickness and film homogeneity important issues in the protective effect. In the present work,
Matéria (Rio J.). Publicado em: 19/07/2018