Corrosion Study
Mostrando 13-24 de 340 artigos, teses e dissertações.
-
13. Scanning Electrochemical Microscopy (SECM) Study of the Electrochemical Behavior of Anodized AZ31B Magnesium Alloy in Simulated Body Fluid
In this work, scanning electrochemical microscopy (SECM) was employed to study the corrosion behavior of anodized AZ31B magnesium alloy exposed to simulated body fluid. SECM measurements were carried out in surface generation/tip collection mode. The hydrogen evolution flux caused during corrosion of the magnesium alloy was oxidized at the ultra-microelectro
Mat. Res.. Publicado em: 28/10/2019
-
14. The importance of corrosion resistance test of cannulas in the quality control of hypodermic needles
According to Anvisa risk rating, hypodermic needles offer medium risk to the user’s health. This study discussed the importance of the corrosion resistance test in tubes of hypodermic needles, in the product quality control. A review of cannulas of hypodermic needles was carried out according to ISO 9626:2003 and 9259:1997 ABNT NBR. For the results evaluat
Braz. J. Pharm. Sci.. Publicado em: 24/10/2019
-
15. Nickel and Chromium Ion Levels in Hair and Gingival Crevicular Fluid with the Corrosion of Brackets in Orthodontic Patients: A Longitudinal Study
Abstract Objective: To assess the levels of nickel and chromium ions in hair and Gingival Crevicular Fluid (GCF) of orthodontic patients and to evaluate the corrosion of orthodontic bracket surfaces. Material and Methods: Nickel and chromium ion concentrations were measured in hair and GCF of 15 patients (9 females and 6 males, aged 16-28 years old) who h
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 10/10/2019
-
16. Revisão sobre ensaios acelerados para indução da corrosão desencadeada por cloretos em concreto armado
Resumo A corrosão de armaduras desencadeada por cloretos é um dos principais problemas que afetam as estruturas de concreto armado. Considerando o estudo desse tipo de problema, a velocidade na coleta dos dados, a possibilidade de controle das variáveis que influenciam o processo de corrosão e o baixo custo na realização dos testes têm sido aspectos m
Ambient. constr.. Publicado em: 03/10/2019
-
17. Effect of Sigma Phase Precipitated at 850 °C on Corrosion Behaviour of UNS S82441 Duplex Stainless Steel
ABSTRACT Duplex stainless steels (DSS) are alloys with binary microstructure consisting of ferrite (δ) and austenite (γ), combining high mechanical properties and corrosion resistance by pitting and stress corrosion, due to the two phases austenite/ferrite. However, the formation of secondary and intermetallic phases, during solidification processes, heat
Matéria (Rio J.). Publicado em: 16/09/2019
-
18. Lime Addition Effect on Corrosion of Reinforced Mortar
ABSTRACT This study aims to investigate the effect of lime addition in cement mortar on corrosion resistance of carbon and galvanized steel reinforcements. Mixed mortars were studied containing three contents of lime (6.7, 13.3, and 26.3 wt.%). The water retention, incorporated air, and compression strength of reinforced mortars were determined. Immersion te
Matéria (Rio J.). Publicado em: 16/09/2019
-
19. Study of behavior alloy Ti and 316L in to simulated body fluid by electrochemical techniques
ABSTRACT In this work, Ti-316L stainless steel was produced, and its electrochemical behavior was characterized. Ti-steel alloys were produced using an induction furnace, by mixing commercial Ti and 316L stainless steel. X-ray diffraction analyses showed the presence of both the materials, Ti and 316L, in the samples produced. The elemental composition of th
Matéria (Rio J.). Publicado em: 16/09/2019
-
20. Aço carbono 1040 como indicador de agressividade do solo e da pasta de cimento em sistemas de ancoragem de linhas de transmissão
RESUMO O encapsulamento de hastes de âncora em pasta de cimento reduz o contato dos materiais metálicos com os ambientes agressivos, em torres estaiadas de linhas de transmissão de energia elétrica. Contudo, ainda são reportados casos de falha prematura devido à corrosão do sistema de ancoragem. O íon cloreto é considerado um dos principais respons�
Matéria (Rio J.). Publicado em: 16/09/2019
-
21. Produção e caracterização de revestimentos de ligas metálicas Cu-Sn em banho eletrolítico contendo glicina: ensaios preliminares
RESUMO Os problemas relacionados à corrosão são frequentes, podendo ocorrer nas mais variadas áreas, tais como, nas indústrias química, petroquímica, naval, de construção civil e automobilística, dentre outros setores produtivos. Portanto, métodos para prevenir a corrosão devem ser empregados para evitar a perda de materiais e o uso de revestimen
Matéria (Rio J.). Publicado em: 16/09/2019
-
22. Effects of Aging Temperature, Time, and Pre-Strain on Mechanical Properties of AA7075
Aluminum alloys of the 7xxx series (AA7075) are preferred in the aerospace and automotive industries due to their low densities, high strength, good corrosion resistance properties. Additionally, these alloys show the most effective aging properties among aluminum alloys. For this reason, it is very important to determine the most appropriate aging parameter
Mat. Res.. Publicado em: 12/09/2019
-
23. Effect of moringa and bagasse ash filler particles on basalt/epoxy composites
Abstract This study evaluated the effect of moringa and nano ash filler particles on mechanical, chemical corrosion and moisture absorption of basalt fiber/epoxy composites. Epoxy resin and Araldite HY951 hardener was used as matrix along with the inclusion of filler particles while the bi-directional woven basalt fiber mat was used as the reinforcement in f
Polímeros. Publicado em: 09/09/2019
-
24. Effects of Macrosegregation and Microstructure on the Corrosion Resistance and Hardness of a Directionally Solidified Zn-5.0wt.%Mg Alloy
This study aims to analyze the influence of macrosegregation on microstructure evolution, and of microstructure length scale on the corrosion resistance of a Zn-5.0wt.%Mg alloy casting. The analyzed samples were taken along the length of castings unidirectionally solidified in unsteady state conditions of heat extraction. Microstructure characterization, mic
Mat. Res.. Publicado em: 05/09/2019