Copings
Mostrando 13-24 de 40 artigos, teses e dissertações.
-
13. Evaluation of vertical marginal discrepancy of zirconia copings, before and after cementation / Avaliação da discrepância marginal vertical de copings de zircônia, antes e após a cimentação
O objetivo deste trabalho foi avaliar a discrepância marginal vertical de copings zircônia, Zirkonzahn® CAD/CAM (Computer Aided Design/Computer Aided Manufacturing). Foram confeccionados 30 copings de zircônia tetragonal policristalina estabilizada por ítrio (Y-TZP) do sistema CAD/CAM e 30 copings metálicos (grupo controle). Os copings foram cimentados
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/12/2011
-
14. Discrepâncias marginal vertical e interna de infraestruturas cerâmicas de zircônia: influência do tipo de sistema de fresagem e do término cervical
Objetivou-se avaliar o efeito do sistema de fresagem e do tipo de término cervical nas discrepâncias marginal (DM) e interna (DI) de copings de zircônia. A partir de três troquéis metálicos padrões com diferentes terminações cervicais, sessenta copings foram confeccionados (N=60) de acordo com os fatores término cervical (Chanfro Largo/CL; Chanfro
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/12/2011
-
15. Analysis of marginal misfit and strain gauge in implant-supported frameworks using straight line and offset placement with different copings under axial and non-axial load / Análise extensométrica e do desajuste marginal de infra-estruturas implanto-retidas nas configurações linear e compensada com diferentes coifas sob aplicação de cargas axiais e não axiais
O objetivo neste estudo in vitro, foi analisar microscopicamente o desajuste vertical e passivo e quantificar a deformação usando análise de extensometria durante aplicação de carga axial e não-axial em prótese parcial fixa implanto-suportada de três elementos, variando a posição dos implantes, linear (L) ou compensada (C) e o tipo de coifa protét
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/09/2011
-
16. Estudo dos fatores interferentes na adaptação marginal de próteses confeccionadas em titânio comercialmente puro e ligas alternativas / Study of determining factors for the marginal fit of prosthesis made of commercially pure titanium and alternative alloys
O desajuste de copings obtidos por fundição por cera perdida está sujeita à vários fatores tais como: contração de fundição do metal, expansão do revestimento, uso de espaçadores, entre outros. O objetivo do estudo foi avaliar o desajuste marginal pré e pós cimentação de copings obtidos com três ligas de metais básicos - Ni-Cr-Be (VB), Ni-Cr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/04/2011
-
17. Influence of marginal fit and cement types on microleakage of all-ceramic crown systems
The purpose of this study was to evaluate the effects of both marginal fit and cementing with different luting agents on the microleakage of all-ceramic crown systems. Thirty-six extracted upper central incisors were prepared for full-coverage crowns and were divided into three groups. Group 1: CAD/CAM-fabricated ZrO2, Group 2: Heat-pressed lithium-disilicat
Brazilian Oral Research. Publicado em: 2011-06
-
18. Evaluation of the accuracy of different transfer impression techniques for multiple implants
The aim of this study was to evaluate the accuracy of three implant transfer impression techniques. Four groups (n = 5) were defined, according to the technique: TC - tapered copings without splint; SC - square copings without splint; SCS - square copings splinted with dental floss and acrylic resin, and CG (control group) - master model with four external h
Brazilian Oral Research. Publicado em: 2011-04
-
19. Resistência de união da interface coping cerâmico pilar de implante variando o agente cimentante antes e após ciclagem térmica / Bond strength of the ceramic coping-implant abutment interface varying luting agent before and after thermal cycling
Objective: The aim of the present study was to evaluate the bond strength of the ceramic coping-abutment implant interface according to the luting agent, before and after thermal cycling. Methods: A total of forty sets of ceramic copings (IPS e.max) and solid pillar 5.5/ regular analogue were divided according to the luting agent (n=10): (OZ) zinc oxide with
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/10/2010
-
20. Avaliação da adaptação marginal implante/coping cerâmico antes e após ciclagem mecânica / Evaluation of marginal adaptation implant/ceramic coping before and after mechanical cycling
Coroas livres de metal vêm sendo cada vez mais utilizadas e preconizadas na odontologia atual. A grande variedade de cerâmicas e a evolução das propriedades desses materiais suscitaram vários estudos sobre a adaptação marginal, tanto para dente, quanto para implantes com plataforma regular em ombro. No entanto, a plataforma dos implantes Straumann em
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/10/2010
-
21. Machined and plastic copings in three-element prostheses with different types of implantabutment joints: a strain gauge comparative analysis
OBJECTIVE: Using strain gauge (SG) analysis, the aim of this in vitro study was quantify the strain development during the fixation of three-unit screw implant-supported fixed partial dentures, varying the types of implant-abutment joints and the type of prosthetic coping. The hypotheses were that the type of hexagonal connection would generate different mic
Journal of Applied Oral Science. Publicado em: 2010-06
-
22. Comparative study of the adaptation between metallic copings, In-Cream alumina and e.max Press, before and after cementation / Estudo comparativo da adaptação marginal entre copings metalicos, In-Ceram alumina e e.max Press, antes e apos a cimentação
Esse estudo avaliou a adaptação marginal entre copings metálicos, In-Ceram e e.max Press, antes e após cimentação em preparos sobre dentes bovinos, utilizando dois tipos de cimento resinosos. Noventa incisivos bovinos foram fixados em resina acrílica ativada quimicamente e as porções coronárias foram preparadas para coroa total, com expulsividade d
Publicado em: 2010
-
23. Influência do formato do pilar na capacidade retentiva de copings metálicos cimentados sobre implantes
This study evaluated the influence of the abutment design on the retention of cementretained, implant-supported metallic copings. Two abutments of the same system, with the same height, indications and total occlusal convergence, but of different designs were evaluated. Ten RN SynOcta abutments and ten RN solid titanium abutments both manufactured by Strauma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/07/2008
-
24. Effect of cervical relining of acrylic resin copings on the accuracy of stone dies obtained using a polyether impression material
The purpose of this study was to evaluate the accuracy of the respective dies after polyether elastomeric procedure in the presence or absence of cervical contact of the acrylic resin shell with the cervical region, establishing a comparison to dies obtained with stock trays. This study consisted of three groups with 10 specimens each: 1) acrylic copings wit
Journal of Applied Oral Science. Publicado em: 2008-02