Computational Engineering
Mostrando 1-12 de 179 artigos, teses e dissertações.
-
1. Finite strip method computer application for buckling analysis of thin-walled structures with arbitrary cross-sections
Abstract The Direct Strength Method (DSM) is a well-known formulation presented in the Brazilian standard ABNT NBR 14762:2010, that estimates the strength capacity of cold-formed steel (CFS) members. However, this formulation requires the elastic critical buckling loads as point of departure, regarding local (L), distortional (D) and global (G) modes, which
REM, Int. Eng. J.. Publicado em: 2021-09
-
2. Error Analysis of the Numerical Method for Correcting the Propagation of EM waves in the Troposphere
Abstract Electromagnetic (EM) waves do not travel in straight lines in the troposphere due to refraction. This leads to errors in many engineering applications. In order to correct these errors, a numerical solution based on the difference method has been proposed, which can reveal the degree of EM wave bending owing to atmospheric refraction, moreover, it c
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
3. Two-dimensional beams in rectangular coordinates using the radial point interpolation method
Abstract The three-dimensional Theory of Elasticity equations lead to a complex solution for most problems in engineering. Therefore, the solutions are typically developed for reduced systems, usually symmetrical or two-dimensional. In this context, computational resources allow the reduction of these simplifications. The most recognized methods of algebraic
REM, Int. Eng. J.. Publicado em: 2020-03
-
4. Influences of the mesh in the CAE simulation for plastic injection molding
Abstract Although computer-aided engineering (CAE) software has been used for many years in the plastic industry, identifying the most appropriate mesh geometry and density remains a challenge. It can affect the accuracy of the simulation, the time and the costs. The evaluation of the most suitable mesh is not easy because the difficulties to obtain the real
Polímeros. Publicado em: 04/11/2019
-
5. SORM DG - an efficient SORM based on differential geometry
Abstract The first order reliability method (FORM) efficiently performs first order structural reliability analysis, but with limited accuracy. On the other hand, the traditional second order reliability method (SORM) was established to improve the results of FORM, but with a supplementary computational process. Proposed herein, is a new SORM, based on diffe
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
6. Special Issue on Computational Methods in Engineering (CILAMCE 2018 - Paris/Compiegne)
Abstract This special issue contains selected papers first presented in a short format at the Congress CILAMCE 2018 (39th Ibero-Latin American Congress on Computational Methods in Engineering) held in Paris and in Compiègne, France, from 11 to 14 November 2018.
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
7. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
8. SENSITIVITY ANALYSIS FOR MODEL COMPARISON AND SELECTION IN TISSUE ENGINEERING
ABSTRACT Computational modeling has been proven to be very useful in tissue engineering over the past years. Because the model is a simplification of the experimental system, the processes accounted for in the model should be analyzed carefully. However, new and complex models are usually proposed without a clear comparison with the basic ones. In this study
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
9. Uma interface de controle para a Fluidodinâmica Computacional
Resumo Neste artigo apresentaremos uma proposta para a utilização da dinâmica de fluidos computacional sob uma perspectiva educacional, tendo como alvo as disciplinas de mecânica dos fluidos e fenômenos de transporte, nos períodos iniciais de cursos de Engenharia e Física. A importância da utilização da simulação na formação de base é amplamen
Rev. Bras. Ensino Fís.. Publicado em: 27/06/2019
-
10. An Extended Linear Discontinuous Method for One-group Fixed Source Discrete Ordinates Problems with Isotropic Scattering in Slab Geometry
RESUMO Atualmente, a obtenção de uma solução numérica precisa para problemas de fonte fixa em ordenadas discretas é relevante em muitas áreas da engenharia e das ciências. Neste trabalho, estendemos o método híbrido Elementos Finitos-Espectro Nodal (FEM-SGF), que foi originalmente desenvolvido para resolver problemas de autovalores de difusão, par
TEMA (São Carlos). Publicado em: 30/05/2019
-
11. Multiobjective and Multicase Optimization of a Spacecraft Radiator
ABSTRACT Optimization is now an established tool for obtaining better solutions in engineering design. Nevertheless, the multiplicity of possible applications and the continuing search for better computational performance has motivated researchers in continuing to propose new methods, as well as improvements on existing ones. Not only optimization has allowe
J. Aerosp. Technol. Manag.. Publicado em: 07/01/2019
-
12. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018