Compressibility
Mostrando 13-24 de 161 artigos, teses e dissertações.
-
13. Effect of the properties of natural resin binder in a high friction composite material
In this paper, a high-friction composite material based on the combination of binder, friction modifiers, fibers and fillers is investigated. In the binder, up to 20% of phenol are replaced by cardanol with various weight ratios of 100/0, 95/5, 90/10, 85/15, 80/20. Cardanol may react both through the phenolic group and the double bond of the side chain yield
Polímeros. Publicado em: 2014
-
14. A numerical simulation of metallic cylindrical sandwich shells subjected to air blast loading
The dynamic response of cylindrical sandwich shells with aluminum foam cores subjected to air blast loading was investigated numerically in this paper. According to KNR theory, the nonlinear compressibility of the air and finite shock conditions were taken into account in the finite element model. Numerical simulation results show that the compression strain
Lat. Am. j. solids struct.. Publicado em: 2013-05
-
15. Caracterização de biomassas brasileiras para fins de aproveitamento energético / Characterization of brazilian biomasses for energy recovery
New energetic alternatives have been the subject of discussion about conservation of natural resources. Such discourses are based mainly on reducing emissions of greenhouse gases and other pollutants, caused mostly by the use of fossil fuels, major source of energy today. In view of the applicability of biomass as energy input, this paper presents an experim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
16. Análise de dados de testes de formação frente aos efeitos de maré / Analysis of well test data against tide effects
Efeito de maré é o nome dado a um fenômeno observado em dados de pressão registrados em acumulações de fluido, incluindo reservatórios de petróleo, e que tem origem na variação do potencial gravitacional a que as massas estão submetidas. As primeiras citações do efeito de maré observado em reservatórios de petróleo ocorreram em meados da déc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/02/2012
-
17. Development of tablets containing semipurified extract of guaraná (Paullinia cupana)
This study evaluated the technological feasibility of producing a semipurified extract of guaraná (Paullinia cupana Kunth, Sapindaceae) in tablet form, using a direct-compression process. Maltodextrin and gum arabic were used to produce the extract microparticles, in order to protect the microparticles against such factors as temperature, oxidation, and hum
Rev. bras. farmacogn.. Publicado em: 14/12/2012
-
18. Technological development of Cecropia glaziovi extract pellets by extrusion-spheronization
Cecropia glaziovi Snethl., Urticaceae, is commonly used in South America and is one of the species included in the Brazilian Medicinal Plants Research Program. Pharmacological studies have led to reports of the potential of C. glaziovi as a hypotensive, antiasthmatic and anxiolytic agent. The strict requirements regarding the quality, safety and effectivenes
Rev. bras. farmacogn.. Publicado em: 11/10/2012
-
19. Spray drying of Eugenia dysenterica extract: effects of in-process parameters on product quality
A 2³ full factorial design was used to assess the impact of spraying air flow rate (30-50 L/min), drying air inlet temperature (90-150 ºC) and extract feed rate (4-6 g/min) on the quality of Eugenia dysenterica DC., Myrtaceae, spray-dried extracts. Response surface methodology (RSM) was applied to analyze the significance of the effects of process factors
Rev. bras. farmacogn.. Publicado em: 18/09/2012
-
20. Estudo da relação entre propriedades de compósitos de fricção aplicados a sistemas de freio a disco e a propensão à ocorrência de Squeal Noise
Automotive brake systems are very often susceptible to generate high frequency noise as a result of a self excited vibration. This phenomenon is generically nominated brake squeal noise and is the subject of many studies which intend to identify and describe its exciting mechanism and to propose counter measures to avoid its occurrence. One key subject yet t
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
21. Consolidação de um rejeito de mineração de areia e modelação do enchimento de um reservatório para sua disposição / Sand-mining waste disposal consolidation and a waste reservoir filling process modeling for its storage
Mining waste is frequently disposed of in the form of mud. The storage capacity of a collection reservoir of mining waste depends on its dimensions and on its operational processes, which are based on the physical characteristics of the mud and its compressibility and hydraulic conductivity. This research focuses on the study of the consolidation characteris
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/04/2011
-
22. PROPRIEDADES FÍSICAS DE UMA TOPOSSEQUÊNCIA ARGISSOLO-GLEISSOLO / PHYSICAL PROPERTIES OF A TOPOSEQUENCE GLEY-PODZOLIC
Os solos da Depressão Central Gaúcha são constituidos porareia, silte e argila. A região tem cotas entre 40 à 100 m, nas mais baixas (várzea) predominam os Gleissolos e nas coxilhas predominam os Argissolos. O objetivo deste trabalho foi avaliar o comportamento compressivo (capacidade de suporte e susceptibilidade a compactação) do solo, e a influên
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/03/2011
-
23. Entropy variation in isothermal fluid flow considering real gas effects
Abstract The present paper concerns on the estimative of the pressure loss and entropy variation in an isothermal fluid flow, considering real gas effects. The 1D formulation is based on the isothermal compressibility module and on the thermal expansion coefficient in order to be applicable for both gas and liquid as pure substances. It is emphasized on the
J. Aerosp. Technol. Manag.. Publicado em: 2011-04
-
24. Efeito da moagem de alta energia na morfologia e compressibilidade do compósito WC-Ni = Effect of high energy milling on the morphology and compressibility of WC-Ni composite powder / Effect of high energy milling on the morphology and compressibility of WC-Ni composite powder
Este trabalho tem por objetivo a investigação do efeito da moagem de alta energia sobre a morfologia, tamanho de partícula e compressibilidade do compósito WC-Ni. O metal duro é um material compósito utilizado em diversas áreas de usinagem, mineração e construção civil, podendo ser aplicado diretamente em componentes de equipamentos de perfuraçã
Publicado em: 2011