Composite Materials Engineering
Mostrando 1-12 de 27 artigos, teses e dissertações.
-
1. Upconversion 3D Printed Composite with Multifunctional Applications for Tissue Engineering and Photodynamic Therapy
Upconversion nanoparticles (UCNPs) are suitable materials for bioapplications due to their ability to emit visible light under near infrared (NIR) excitation, in the biological transparency range. Polycaprolactone(PCL)-based scaffolds are widely used in tissue engineering in combination with inorganic compounds to improve bioactivity and osteoconductive prop
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
2. Seismic resistance performance of a utility tunnel in saline soil foundation based on new cementitious composite materials
Abstract Because soluble salt in saline soil dissolves with water, utility tunnels built in saline soil foundation are more likely to damage due to by groundwater and earthquake. In this study, new cementitious composite materials were developed by using slag, building gypsum, quicklime, and magnesia. The unconfined compressive strengths of the saline soil s
Lat. Am. j. solids struct.. Publicado em: 10/01/2020
-
3. HYDROXYAPATITE - CARBON NANOTUBE COMPOSITES FOR DRUG DELIVERY APPLICATIONS
Abstract The aim of this study was the synthesis of composites containing hydroxyapatite (Hap) or silicon substituted hydroxyapatite (HapSi), carboxyl functionalized carbon nanotubes (fMWCNT) and gelatin (G) in different ratios. Ibuprofen (IBU) was chosen as a model drug for the formulation of extended-release dosage forms. The obtained composites were chara
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
4. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
5. Analysis of Failure Criteria in Laminas Reinforced with Unidirectional Curaua Fiber Fabric
Natural fibers are increasingly used as composite reinforcement in different fields of engineering. Caraua fiber stands out for its good mechanical properties and adherence to resin; however, little is known about its behavior in the manufacture of a composite or whether classic failure theory applies in this case. The present study assesses the mechanical p
Mat. Res.. Publicado em: 25/04/2019
-
6. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
7. New mathematical modelling for grain size distribution adjustment in concrete
Abstract Concrete used in civil engineering is a composite obtained from the combination of coarse and fine aggregates, cement and water, and its cost and quality are normally associated to the proportion of its constituents (ceramic formulation), as well as the reduction of water consumption. The aggregates used in concrete may have diverse origins, and the
Cerâmica. Publicado em: 2019-01
-
8. Análisis comparativo de las propiedades mecánicas de un material compuesto reforzado con fibras de carbono y las de su matriz polimérica de resina epóxica
ABSTRACT In recent years composite materials have been developed for different applications in engineering areas. This paper first presents the tensile properties of a polymer, in this case an epoxy resin, to be used as the matrix of a fiber reinforced composite material. A study of the mechanical properties is presented, which was carried out by performing
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Polypropylene Composites Manufactured from Recycled Carbon Fibers from Aeronautic Materials Waste
Carbon fiber composites are used in several industries such as, aerospace, automotive, civil engineering, sports goods and technical applications due to its low-weight, strength and stiffness. However, the technology of recycling of these thermosetting polymer composites remains an engineering challenge because of their cross-linked structures that impede th
Mat. Res.. Publicado em: 23/10/2017
-
10. Flexural Behavior of Epoxy Matrix Composites Reinforced with Malva Fiber
Polymer composites reinforced with natural fibers have been increasingly investigated and applied as engineering materials owing to their economical, technical, societal and environmental advantages. The malva fiber, particularly an important resource in the Amazon region in Brazil, only recently begin to be investigated as possible composite reinforcement f
Mat. Res.. Publicado em: 17/11/2015
-
11. BIOMATERIAIS: TIPOS, APLICAÇÕES E MERCADO
AbstractThe types of compounds used in the production of biomaterials, namely metals, ceramics, synthetic and natural polymers, as well as composite materials, are discussed in the present work, together with details of their application and evolution from biocompatible to bioactive, biodegradable, and biomimetic clinical products. The chemical structure, th
Quím. Nova. Publicado em: 2015-08
-
12. Simulação da propagação de ondas ultrassônicas longitudinais em materiais estruturais aeroespaciais / Simulating the propagation of longitudinal ultrasonic waves in aerospace structural materials
The use of composite materials in the aerospace industry is increasing due to its low ratio between density and mechanical strength. To perform non-destructive testing using ultrasound, it is necessary to know the sound velocity in these materials. It is not always possible to manufacture physical prototypes during the development of a project because of tim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012