Coke
Mostrando 1-12 de 132 artigos, teses e dissertações.
-
1. Processamento de catalisadores gastos de unidade de hidrodessulfurização profunda (ultra-deep HDS)
PROCESSING OF SPENT ULTRA-DEEP HYDRODESULFURIZATION CATALYSTS. This work discusses the recycling of spent NiMo/Al2O3 catalysts from ultra-deep hydrodesulfurization (HDS) units. They contain a refractory coke and fouling elements from the processed feedstocks. Samples were preoxidized (600 ºC) for 12 h using a very slow heating rate to eliminate coke and vol
Química Nova. Publicado em: 2022
-
2. Quality evaluation of metallurgical coke produced with sawdust and different mixtures of coal
Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal fu
REM, Int. Eng. J.. Publicado em: 2021-06
-
3. The importance of education
Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal fu
REM, Int. Eng. J.. Publicado em: 2021-06
-
4. Porosity of CHA Zeolite Driving the Formation of Polyaromatic Coke Species in the Methanol to Olefins Reaction
The pore size of the chabazite structure is exceptionally suitable for the methanol to olefins (MTO) reaction. The reaction has an induction period required for the formation of a hydrocarbon pool (HP), usually composed of aromatic compounds of different sizes. HP is alkylated by methanol and afterward cracked, leading to the formation of olefins. Despite th
J. Braz. Chem. Soc.. Publicado em: 2021-05
-
5. Catalytic Dehydration of Glycerol to Acrolein over Aluminum Phosphate Catalysts
Gas phase conversion of glycerol to acrolein over a variety of aluminum phosphate (AlP) catalysts synthesized by a simple replacement reaction method with a variation in calcination temperature (300-700 ºC, AlP-300, AlP-400, AlP-500, AlP-600, and AlP-700, respectively) has been investigated. The textural properties, acidities and coke contents of the sample
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
6. Effect of high petroleum coke additions on metallurgical coke quality and optical texture
Abstract The objective of the present study was to evaluate the effect of high additions of petroleum coke on the rheological properties of coking coal and the quality of cokes produced on pilot scale at the Usiminas R&D Center. For this purpose, blends using petroleum coke additions of 5%, 10%, 20%, 30% and 40% were produced. The results showed that the ble
REM, Int. Eng. J.. Publicado em: 2020-06
-
7. PREPARATION AND SIMULATION OF THE ON-LINE SiO2/S COATING FOR COKING INHIBITION IN THE INDUSTRIAL CRACKING FURNACE
Abstract Coke formation inside radiant coils is one of the main problems during thermal cracking of hydrocarbons. The on-line preparation of the coating for coking inhibition is a promising technology because it provides more flexibility to the operators on site. The SiO2/S coating was prepared on the inner surface of coils in an 8-year-served GK-VI industri
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
8. Quality of Wood and Charcoal from Eucalyptus Clones for Metallurgical Use
ABSTRACT The objectives of the present work were to determine the properties of wood and charcoal from Eucalyptus clones and assess impacts of charcoal features on the CO2 gasification reactivity and to compare with coke reactivity. Gasification reactivity was performed using charcoal particles in a furnace setup at 820 °C, under CO2 atmosphere. The results
Floresta Ambient.. Publicado em: 03/10/2019
-
9. Life cycle analysis of HCNG light-duty vehicle demonstration project
ABSTRACT The demonstration is an effective initiative to bridge the gap between a premature technology and its large-scale commercialization. A systematic method of LCA was used to perform the well-to-wheel analysis of a CNG light-duty truck operated with 0%, 15%, and 30% blends of hydrogen with compressed natural gas fuel under the system boundary of “per
Matéria (Rio J.). Publicado em: 10/06/2019
-
10. Influence of moisture and particle size on coal blend bulk density
Abstract Coal blend bulk density is an important property in the coking process. Some variables, such as moisture and particle size, which are controlled or measured in the coal beneficiation process in steel mills, exert a strong influence on this feature. This study aims to understand the density variation of coal blends by the influence of moisture and pa
REM, Int. Eng. J.. Publicado em: 2019-06
-
11. CHARACTERIZATION OF SEVERAL GENERATIONS OF NiMo HYDROPROCESSING CATALYSTS EMPLOYED IN THE SAME HYDROTREATER
This work details the chemical characterization of four NiMo/Al2O3 hydroprocessing generation catalysts (1979-1986, 1993-1998, 2003-2008 and 2008-2011) employed to perform hydrodesulfurization (HDS) of diesel fractions in the same hydrotreater of a Brazilian refinery. The basic differences are the quality of the feedstocks and the HDS experimental conditions
Quím. Nova. Publicado em: 27/05/2019
-
12. Performance evaluation of NiCo2O4 spinel as a catalyst for partial oxidation of methane
ABSTRACT The NiCo2O4 catalyst with spinel structure was prepared by a modified polymeric-precursor method using gelatin as an organic-directing agent. The obtained powder was characterized by XRD, TPR and tested on the partial oxidation of methane. The Rietveld analysis performed on the XRD pattern confirmed the crystallization of two phases, the spinel NiCo
Matéria (Rio J.). Publicado em: 20/05/2019