Cohesive Strength
Mostrando 1-12 de 72 artigos, teses e dissertações.
-
1. Soil stabilization with lime for erosion control in solar plants
Abstract The installation of solar parks requires extensive areas and results in soil erosion in many cases. One suitable solution is applying lime to improve soil characteristics, such as mechanical strength, stability, workability, durability, and internal and surface erosion resistance. This soil treatment is of particular importance when dealing with hyd
REM, Int. Eng. J.. Publicado em: 2021-09
-
2. Stabilization of sandy soil with high content of asphalt emulsion
Abstract The purpose of this article is to evaluate the shear strength parameters of mixtures of sandy soil with high asphalt emulsion contents for their use in geotechnical structures, such as zoned earth dams, embankments, etc. The methodology adopted consisted of: collecting and characterizing samples of sandy soil to be laboratory tested; compacting the
REM, Int. Eng. J.. Publicado em: 2020-06
-
3. Poesia. A glorificação do sensível
resumo Este ensaio busca ressaltar algumas características da extensa obra lírica de Johann Wolfgang von Goethe, desde os versos de “ocasião” com que saúda os avós maternos no Ano Novo de 1757, até pouco antes de sua morte em março de 1832. Distinguindo-se por profícua interpenetração de estilos, formas, motivos e também de várias tradições
Estud. av.. Publicado em: 12/08/2019
-
4. Mechanical and histological evaluation of a titanium device for orthodontic anchorage, placed with or without cyanoacrylate adhesive
RESUMO Objetivos: este estudo teve como objetivo realizar uma avaliação histológica de um mini-implante para ancoragem em Ortodontia. Avaliou-se, também, a carga de cisalhamento e o padrão de fratura imediatamente e após 30 e 60 dias da sua inserção, com ou sem o uso do adesivo N-butil-2-cianoacrilato. Métodos: noventa e seis mini-implantes (Arro
Dental Press J. Orthod.. Publicado em: 01/08/2019
-
5. Effect of Glass Fiber Post Adaptation on Push-Out Bond Strength to Root Dentin
Resumo O objetivo neste estudo foi avaliar o impacto de diferentes diâmetros de pinos de fibra de vidro (PFVs) na resistência de união à dentina. Quarenta dentes humanos unirradiculares foram tratados endodonticamente e utilizados para cimentação de PFVs (White Post DC, FGM) com diferentes diâmetros (n=10): P1 - ø 1,6 mm coronal x 0,85 mm apical; P2
Braz. Dent. J.. Publicado em: 22/07/2019
-
6. Fatigue survival and damage modes of lithium disilicate and resin nanoceramic crowns
Abstract Polymer-based composite materials have been proposed as an alternative for single unit restorations, due to their resilient and shock absorbing behavior, in contrast to the brittleness of ceramic materials that could result in failure by fracture. Objective: To evaluate the fatigue strength and damage modes of monolithic posterior resin nanoceramic
J. Appl. Oral Sci.. Publicado em: 30/05/2019
-
7. Estimation of precompression stress in an Ultisol cultivated with sugarcane
RESUMO Propriedades compressivas do solo são frequentemente utilizadas para entender o processo de compactação. Alternativamente a ensaios laboratoriais, funções de pedo-transferência têm sido usadas para estimar o comportamento mecânico em função de parâmetros físicos do solo. Este trabalho objetivou examinar o impacto da densidade (BD) e do con
Rev. bras. eng. agríc. ambient.. Publicado em: 06/05/2019
-
8. PHYSICAL, MECHANICAL AND THERMAL BEHAVIOR OF ADOBE STABILIZED WITH “SYNTHETIC TERMITE SALIVA”
ABSTRACT Adobe is an efficient construction material for several reasons, such as its thermal comfort, sustainability, and lower energy cost, as well as the simplicity of its production and execution. However, challenges such as water absorption, capillarity, and compressive strength should be investigated to improve its physical and mechanical properties. �
Eng. Agríc.. Publicado em: 25/04/2019
-
9. Tooth whitening affects bond strength of adhesive systems in enamel
ABSTRACT This study presents how the tooth whitening affects the bond strength and fracture type of three distinct adhesives — a conventional, a self-etching, and a universal adhesive — in enamel. Health bovine incisors were prepared by flattening the labial surface; part of these teeth was submitted to whitening treatment with a peroxide-based product (
Matéria (Rio J.). Publicado em: 06/12/2018
-
10. Bonding properties and crystallization kinetics of thermoplastic polyurethane adhesive
ABSTRACT The advantages of heterophasic thermoplastic polyurethanes (TPUs), such as their phase behavior and mechanical properties, make these materials an important class of adhesives. Whereas the amorphous phase contributes to good adhesion properties, the crystalline phase is responsible for the cohesive force of TPU adhesives. This work investigates the
Matéria (Rio J.). Publicado em: 06/12/2018
-
11. How to improve root canal filling in teeth subjected to radiation therapy for cancer
Abstract The aim of this study was to evaluate the influence of radiation therapy on root canal sealer push-out bond strength (BS) to dentin and the sealer/dentin interface after different final irrigation solutions (NaOCl, EDTA, and chitosan). Sixty-four maxillary canines were distributed into two groups (n=30): non-irradiated and irradiated with 60 Gy. Can
Braz. oral res.. Publicado em: 29/11/2018
-
12. Obtención y caracterización de recubrimientos de biovidrio sobre la aleación de Mg AZ31
ABSTRACT The ideal material for a metal bone prosthesis must undergo a gradual corrosion in vivo, without releasing toxic components, while acting as a support and facilitating the growth of bone tissue, until a replacement is completed by the regenerated bone. . Biodegradable magnesium alloys have been studied because of their excellent mechanical propertie
Matéria (Rio J.). Publicado em: 19/07/2018