Ceramic Materials
Mostrando 1-12 de 337 artigos, teses e dissertações.
-
1. A review on the ceramic additive manufacturing technologies and availability of equipment and materials
Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metal
Cerâmica. Publicado em: 2022
-
2. A review on the production of porous ceramics using organic and inorganic industrial waste
Abstract The use of industrial waste in compositions of ceramic masses has attracted great interest from the scientific community, as they can be considered abundant and diversified alternative sources of raw materials. At the same time, there is a growing interest in the development of porous ceramics due to their wide possibilities for use in various field
Cerâmica. Publicado em: 2022
-
3. Effects of plaster to water ratio on physical and mechanical properties of ceramic pieces produced by the slip casting process
Abstract In the slip casting process, the relationship between the amount of plaster and water used in the production of molds influences the production of ceramic materials, because the higher the water content in the mixture, the lower the mechanical strength of the mold and higher the water absorption rate. In order to evaluate the influence of the variat
Cerâmica. Publicado em: 2022
-
4. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
5. Development of a ceramic membrane for emulsion water-diesel treatment
Abstract The purpose of this study was the development of a low-cost ceramic tubular membrane, using inexpensive materials, namely natural clay, and graphite as a porogenic agent. Such a low-cost membrane can be used as filters or porous supports for the preparation of multilayer ceramic membranes. Extrusion was used as a shape-forming method for this purpos
Cerâmica. Publicado em: 2022
-
6. Characteristics and utilization prospects of red ceramic waste in lightweight aggregates: a systematic review
Abstract Red ceramic waste (RCW) is one of the main by-products generated by the production of ceramic materials. Its application in lightweight aggregates (LWAs) has not yet been tested. Thus, this review intends to evaluate the perspectives of using RCW in the manufacture of LWAs. The search was carried out in the ScienceDirect database. 47 articles were s
Cerâmica. Publicado em: 2022
-
7. Preparation of Silicon Oxycarbide (SiCO) Ceramics from Different Polymer Architectures and Assessment on the Performance as Electrodic Materials for Voltammetric Sensing of Antioxidant Phenolic Compounds
Silicon oxycarbide (SiCO) ceramics obtained from polymer pyrolysis and with varied carbon contents were prepared and evaluated as new electrodic materials for sensing of tert butylhydroquinone (TBHQ) and butylated hydroxyanisole (BHA) antioxidants. Three polymers were synthesized varying molecular architecture and aromatic carbon groups, followed by pyrolysi
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
9. Dolomite-zirconia reaction sintered bonded coarse magnesia ceramics: effect of the bonding proportion
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Cerâmica. Publicado em: 2021-06
-
10. Editorial Comment: Luts-V: A new simplified score for assessing lower urinary tract symptoms in men
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
11. Oxidative Stress & Male Infertility - A necessary and conflicted indissociable marriage: How and when to call for evaluation?
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
12. Editorial Comment: Vasectomy re-reversal: effectiveness and parameters associated with its success
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06