A review on the ceramic additive manufacturing technologies and availability of equipment and materials

AUTOR(ES)

Camargo, I. L. de; Fortulan, C. A.; Colorado, H. A.

FONTE

Cerâmica

DATA DE PUBLICAÇÃO

2022

RESUMO

Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metals, which is related to the limited availability and costs of equipment and materials for such applications. This review examined the advantages and limitations of each process (binder jetting, direct ink writing, directed energy deposition, fused deposition, material jetting, selective laser sintering, selective laser melting, and vat photopolymerization), discussing their particularities. It also summarized the commercially available 3D printers and raw materials for ceramic processing, pointing out to trends and challenges of each technology.

Documentos Relacionados

• Decision support method to apply Additive Manufacturing Technologies for plastic components in the aircraft industry
• Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
• Selection methodologies of materials and manufacturing processes
• Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants
• Simulation-Based Analysis of Additive Manufacturing Systems for Fuel Nozzles