Ceramic Materials
Mostrando 13-24 de 337 artigos, teses e dissertações.
-
13. Dysplasia of the fibrous sheath with axonemal and centriolar defects combined with lack of mitochondrial activity as associated factors of ICSI failure in primary ciliary dyskinesia syndrome
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
14. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
15. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
16. Effects of sintering temperature on microstructure and properties of sanitaryware ceramic produced with waste material
Abstract This paper aims at exploring the possibility of using a great percentage of recycled materials into vitreous china (VC), thus, contributing to urban waste decrease while lowering the industry’s buying costs, previously optimized, for the sanitaryware production. The recycled blend was introduced in the ceramic slip, Sanitser VC, and used in three
Cerâmica. Publicado em: 2021-03
-
17. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
18. Ceramic Production Technology among the Asurini of Xingu: Technical choices, transformations and enchantment
Resumo Vários trabalhos de antropologia das técnicas e da tecnologia têm enfatizado que para além dos seus aspectos materiais e pragmáticos, as tecnologias são constructos sociais que produzem significados, ou ainda, que os processos técnicos mediam relações entre pessoas (humanas e não-humanas), materiais e substâncias (tangíveis e intangíveis)
Vibrant, Virtual Braz. Anthr.. Publicado em: 28/11/2019
-
19. Study of Structural and Electric Properties of the PZT 52/48 Doped With Er+3
The scientific community has shown a growing interest in relating to the ferroelectric materials and it has made an effort to develop them. Among these several ferroelectric materials, we proposed to investigated Pb(ZrTi)O3 doped with distinct Er+3 concentrations. Our aim was to investigate how the erbium affects the PZT electrical properties. To determine t
Mat. Res.. Publicado em: 25/11/2019
-
20. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
RESUMO Este trabalho investigou o efeito da adição de resíduo de vidro para fabricação de cerâmica de alvenaria. Foram conformados corpos-de-prova cilíndricos de 27 mm de diâmetro por 45 mm de altura, a partir da massa padrão de uma indústria de cerâmica vermelha e outras 3 formulações (5, 10 e 20%) com incorporação de vidro, baseado em estudo
Matéria (Rio J.). Publicado em: 25/11/2019
-
21. Análises de dosagens de concreto asfáltico do tipo Pré Misturado a Frio (PMF) utilizando Resíduos da Construção e Demolição de obras (RCD)
RESUMO Na construção civil, um problema ambiental recorrente é a geração e disposição de Resíduos de Construção e Demolição (RCD) de obras. A utilização do RCD como agregados na composição de concreto asfáltico, do tipo Pré Misturado a Frio (PMF), torna possível a execução de pavimentos rodoviários de baixo tráfego. Diante desses fatos
Matéria (Rio J.). Publicado em: 25/11/2019
-
22. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019
-
23. Characterization of Brazilian Northeastern plastic clays
Resumo Argilas plásticas são uma das principais matérias-primas usadas em tecnologia cerâmica. No entanto, há uma escassez dessas argilas no mundo para o uso em tecnologia de porcelanas. O objetivo deste trabalho foi caracterizar argilas plásticas do nordeste brasileiro. Composições química e mineralógica, distribuição do tamanho de partículas,
Cerâmica. Publicado em: 14/11/2019
-
24. Enrichment of Copper, Lead, and Tin by Mechanical Dry Processing of Obsolete Printed Circuit Board Residues
Waste printed circuit boards (WPCB) residues were mechanically processed to concentrate their metal content aiming to reduce costs of the subsequent recovery of copper, tin, and lead. A fully dry route was proposed to avoid the generation of liquid effluents that would require additional treatment. Firstly, 10.7% of the residue was segregated by magnetic sep
Mat. Res.. Publicado em: 24/10/2019