Casting
Mostrando 25-36 de 570 artigos, teses e dissertações.
-
25. Effect of Squeeze Casting on Microhardness and Microstructure of Al-3Cu-xSi Alloy
Aluminum alloys of the ANSI series 319 present Si and Cu as the main alloying elements and the mechanical strength of these alloys can be improved by the precipitation of the metastable Al2Cu phase. Squeeze Casting is a casting process in which the cast metal is deposited in a metal mold and solidified under certain pressure exerted by a punch. This process
Mat. Res.. Publicado em: 30/09/2019
-
26. Effect of Y Content on Properties of Extruded Zn-1.5Mg-xY Alloys for Medical Applications
In this work, we investigated the effect of yttrium(Y) on microstructure, the mechanical and corrosion properties and the cytotoxicity of Zn-1.5Mg-xY(x=0, 0.2, 0.5wt%) alloys prepared by casting and extrusion. The results showed that the microstructure of extruded Zn-1.5Mg-xY alloys consisted of α-Zn matrix, Mg2Zn11 particles and Y containing blocks. The te
Mat. Res.. Publicado em: 30/09/2019
-
27. Effect of Ca Content on Properties of Extruded Mg-3Zn-0.5Sr-xCa Alloys for Medical Applications
Mg-3Zn-0.5Sr-xCa(wt.%) (x=0, 0.2, 0.5) alloys were fabricated by casting and hot extrusion. X-ray diffraction (XRD) and optical microscopy observation showed that the microstructure of Mg-3Zn-0.5Sr-xCa alloys was composed of α-Mg matrix and Mg17Sr2 phase precipitated along grain boundaries. The tensile strength of the alloy increased from 255MPa to 305MPa w
Mat. Res.. Publicado em: 30/09/2019
-
28. Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
ABSTRACT Zirconia (ZrO2) dispersed aluminum alloy metal matrix composites produced by stir casting techniques. Using stir casting techniques, aluminium based composites with varying amounts of 3%, 6%, 9%, and 12% of zirconia by weight are fabricated. The prepared samples were subjected to physical, mechanical,tribiology and microstructure investigation. The
Matéria (Rio J.). Publicado em: 16/09/2019
-
29. Tensile and fatigue properties, machinability and machined surface roughness of Al-Si-Cu alloys
ABSTRACT In this paper, the aim was to determine if ASC91 (9 % Al, 1 % Cu) could be replaced with ASC73 (7 % Al, 3 % Cu) aluminium alloy, with presumably improved machinability due to lower silicon content (9 to 7 %) and retained mechanical properties due to a higher copper content (1 to 3 %). The test samples were excised from cylinder heads produced by the
Matéria (Rio J.). Publicado em: 16/09/2019
-
30. Análise da geração de energia elétrica por meio da utilização de conversores do tipo TEG em lingotamento contínuo de aços
RESUMO A fabricação do aço é um processo que requer enormes quantidades de recursos, como por exemplo combustíveis, minério de ferro, carvão, entre outros. Com a crescente preocupação com o meio ambiente, seja pelas cargas ambientais ou pelo aquecimento global, cresce também a necessidade do desenvolvimento de novas tecnologias que possibilitem um
Matéria (Rio J.). Publicado em: 16/09/2019
-
31. Estudo do envelhecimento e do tratamento térmico de rejuvenescimento da superliga GTD111
RESUMO A superliga de níquel GTD111 é comumente utilizada na fabricação de pás de turbinas a gás, destinadas a geração de energia e aplicações aeronáuticas. O presente estudo investiga o comportamento desta superliga “como fornecida” pelo fabricante e previamente tratada termicamente à fim de diminuir o tamanho de γ’ e transformá-lo de mo
Matéria (Rio J.). Publicado em: 16/09/2019
-
32. Avaliação da utilização da pós cura nas propriedades térmicas e mecânicas de um sistema epóxi de cura à temperatura ambiente
RESUMO Neste trabalho, uma resina epóxi de cura a temperatura ambiente foi submetida a ciclos térmicos de pós cura para verificar as alterações nas propriedades térmicas e mecânicas finais do material. As amostras foram obtidas por vazamento em molde metálico e os ciclos de pós cura foram realizados a 75°C, 90°C, 110°C por uma hora e um ciclo de
Matéria (Rio J.). Publicado em: 16/09/2019
-
33. Effects of Macrosegregation and Microstructure on the Corrosion Resistance and Hardness of a Directionally Solidified Zn-5.0wt.%Mg Alloy
This study aims to analyze the influence of macrosegregation on microstructure evolution, and of microstructure length scale on the corrosion resistance of a Zn-5.0wt.%Mg alloy casting. The analyzed samples were taken along the length of castings unidirectionally solidified in unsteady state conditions of heat extraction. Microstructure characterization, mic
Mat. Res.. Publicado em: 05/09/2019
-
34. Investigation of Thermal Parameters Effects on the Microstructure, Microhardness and Microsegregation of Cu-Sn alloy Directionally Solidified under Transient Heat Flow Conditions
The microstructure and mechanical properties of cast materials are strongly dependent on the thermal history during solidification process. The global casting industry has faced major challenges, i.e., customers increasingly demand completely finished cast parts as well as complexity of casting alloys are rising. Therefore, the previous knowledge the solidif
Mat. Res.. Publicado em: 19/08/2019
-
35. A tradução de Die Verneinung para o Português e uma nova hipótese
Os autores realizam, a partir da análise de diferentes versões e traduções do artigo freudiano Die Verneinung (1925), uma investigação sobre fundamentais termos e concepções empregados por Freud, possibilitando um novo exame sobre alguns fenômenos clínicos e impasses diagnósticos.(The translation of “Die Verneinung” into Portuguese and a new h
Rev. latinoam. psicopatol. fundam.. Publicado em: 29/07/2019
-
36. Avaliação do grau de orientação de fibras de aço induzida na moldagem de elementos planos com concreto autoadensável
RESUMO O uso de concreto autoadensável (CAA) aliado ao concreto reforçado com fibras (CRF) tem sido objeto de várias pesquisas recentes. A combinação da fluidez do CAA com o uso de fibras aumenta a probabilidade de que, no processo de lançamento, seja possível causar orientação preferencial nas fibras, inclusive em elementos planos. Isto pode ser be
Matéria (Rio J.). Publicado em: 10/06/2019