Carbon Fibers
Mostrando 37-48 de 108 artigos, teses e dissertações.
-
37. Simulação da propagação de ondas ultrassônicas longitudinais em materiais estruturais aeroespaciais / Simulating the propagation of longitudinal ultrasonic waves in aerospace structural materials
The use of composite materials in the aerospace industry is increasing due to its low ratio between density and mechanical strength. To perform non-destructive testing using ultrasound, it is necessary to know the sound velocity in these materials. It is not always possible to manufacture physical prototypes during the development of a project because of tim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
38. Qualidade da madeira de Eucalyptus para a produção de carvão vegetal / Wood quality of Eucalyptus for charcoal production
The present study aimed to determine the properties of wood and charcoal from different clones of Eucalyptus spp. Six clones at 7.5 years old were evaluated and the samples were from a clonal test of a forestry company, located in the city of Lassance, Minas Gerais, Brazil. For wood, basic density, heart/sapwood ratio, morphological analysis of fibers and po
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/02/2012
-
39. Influence of thermal treatment on porosity formation on carbon fiber from textile PAN
Activated carbon fibers (ACFs) are known as an excellent adsorbent material due to their particular characteristics such as their high speed adsorption rate and for being easy to handle. The ACFs are commercially manufactured from carbon fibers (CF) which receive an additional activation process and can be produced from celluloses, phenolic resin, pitch and
Mat. Res.. Publicado em: 22/11/2012
-
40. Bending investigation on carbon fiber/epoxy composites nano-modified by graphene
An extreme conditions situation, e.g. pre-salt deep sea exploration, requires new materials with even better performance. Nanotechnology is the new paradigm that can lead to the development of these new super materials. The effect of graphene pileups dispersion into carbon fiber/epoxy composites was investigated experimentally. The dispersion process was bas
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-09
-
41. Flexural behavior of Sisal/Castor oil-Based Polyurethane and Sisal/Phenolic Composites
Natural fibers used as reinforcement of polymeric composites are interesting research subjects in polymer technology. Nowadays, these materials are being considered as a way to reinforce timber structures improvement. Fibers with larger structural applications are glass and carbon fibers, however, the use of natural fibers is an economic alternative and pres
Materials Research. Publicado em: 24/02/2012
-
42. Avaliação da aderência entre o concreto e o sistema de reforço com fibra de carbono / Evaluation of the adhesion between concrete and strengthening system with carbon fiber
O reforço de estruturas de concreto armado ou protendido têm sido necessário na construção civil devido às falhas causadas por erros em projetos e execuções de obras, corrosões de armaduras, reabilitação após incêndios ou mudanças na utilização das estruturas projetadas. Os métodos convencionais para reforço de estruturas de concreto estão
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/04/2011
-
43. Enhanced electrochemical activity using vertically aligned carbon nanotube electrodes grown on carbon fiber
Vertically aligned carbon nanotubes were successfully grown on flexible carbon fibers by plasma enhanced chemical vapor deposition. The diameter of the CNT is controllable by adjusting the thickness of the catalyst Ni layer deposited on the fiber. Vertically aligned nanotubes were grown in a Plasma Enhanced Chemical Deposition system (PECVD) at a temperature
Materials Research. Publicado em: 26/08/2011
-
44. Preparação e caracterização de materiais carbonosos termo-resistivos a partir de tecidos de fibras PAN / Thermal and mechanical properties of no-flame carbon materiais
A preocupação com a segurança e a redução de prejuízos diante de um acidente envolvendo fogo tem gerado a busca por materiais que possam ser utilizados nestas situações. Para locais que envolvem altas temperaturas, existem os materiais que não propagam chama. Os materiais que não propagam chama e que atuam como isolantes térmicos possuem inúmeras
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 18/05/2010
-
45. Processamento de nanofibras de poliamida 66 / nanotubos de carbono de múltiplas camadas por eletrofiação / Processing and characterization of polyamide 66 / MWNT nanocomposite by electrospinning
Nanocomposite fibers with polymer matrix have many applications, such as protective clothing, filtration and artificial blood vessels. Many of these applications require that the fiber has nanometric size due to some properties, as high surface area and high aspect ratio. In this research, aligned and non-aligned nanocomposites of polyamide 6,6 with multiwal
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/03/2010
-
46. Synthesis of a boron modified phenolic resin
Abstract: Phenolic resin has long been used as matrix for composites mainly because of its flame retardant behavior and high char yield after pyrolysis, which results in a self supporting structure. The addition of ceramic powders, such as SiC and B4C, as fillers to the phenolic resin, results in better thermo-oxidative stability, but as drawbacks, it has po
J. Aerosp. Technol. Manag.. Publicado em: 2010-08
-
47. Processing of high performance composites based on peek by aqueous suspension prepregging
The use of polyamic acid (PAA) precursor as interphase in polymer composites is one of the many applications of polyimides (PIs). In this work, composites based on poly(ether-ether-ketone) (PEEK) and carbon fibers were prepared using two manufacturing techniques for thermoplastic composites: hot compression molding, and aqueous polymeric suspension prepreggi
Materials Research. Publicado em: 2010-06
-
48. Degradation of carbon-based materials under ablative conditions produced by a high enthalpy plasma jet
Abstract: A stationary experiment was performed to study the degradation of carbon-based materials by immersion in a plasma jet. In the experiment, graphite and C/C composite were chosen as the target materials, and the reactive plasma jet was generated by an air plasma torch. For macroscopic study of the material degradation, the sample's mass losses were m
J. Aerosp. Technol. Manag.. Publicado em: 2010-04