Calorimeter
Mostrando 1-12 de 73 artigos, teses e dissertações.
-
1. Obtaining and characterization of anthocyanins from Euterpe oleracea (açaí) dry extract for nutraceutical and food preparations
Abstract The main constituents of the Euterpe oleracea Mart., Arecaceae, fruits (açaí) are anthocyanins. This paper aimed to standardize the extraction process and characterize an anthocyanin-rich dry extract obtained from this fruit. A 23 full factorial design was used. The volumes of ethanol 92% and acetic acid and the extraction time were used as factor
Rev. bras. farmacogn.. Publicado em: 09/12/2019
-
2. Experimentos de Calorimetria em Cursos Universitários
Resumo Neste trabalho investigamos em detalhes o experimento de calorimetria tipicamente realizado em cursos universitários. A motivação foi a consistente ocorrência de problemas na determinação por parte dos(as) estudantes do calor específico de uma peça de teste, muitas vezes obtendo-se valores negativos. Exploramos diversas variações do método
Rev. Bras. Ensino Fís.. Publicado em: 31/10/2019
-
3. Experimental Investigation of Isobaric specific heat capacity (Cp) of 9-ethylcarbazole in liquid and solid state
ABSTRACT Liquid organic hydrides, e.g. 9-ethylcarbazole, are potentially interesting hydrogen storage materials because of their reversible hydrogen sorption properties. In this study, the isobaric specific heat capacity of 9-ethylcarbazole in solid and liquid phases was investigated using adiabatic calorimeter. The experimental setup consisting of two basic
Matéria (Rio J.). Publicado em: 10/06/2019
-
4. Influência do uso de cinza volante na elevação adiabática de temperatura e resistência à compressão de concretos
RESUMO A construção de grandes edifícios tem requerido a execução de blocos de fundação de grandes dimensões, com volumes que chegam a milhares de m3 de concreto. Em geral, estas estruturas são executadas em concretos autoadensáveis e/ou de altas resistências, resultando em elevados consumos de aglomerante. Nesses casos, o emprego de cinza volante
Matéria (Rio J.). Publicado em: 10/06/2019
-
5. Complexation and enhancement of temozolomide solubility with cyclodextrins
ABSTRACT Temozolomide is a poorly soluble anti-cancer drug used in the treatment of some brain cancers. Following literature reports about the enhancement of solubility and stability for these kinds of drugs upon complexation with cyclodextrins, we aimed to form an inclusion complex between temozolomide and the different types of cyclodextrins (CDs) to enhan
Braz. J. Pharm. Sci.. Publicado em: 26/07/2018
-
6. Estabilidad de las fases U3Si5, USi2-x y USi2 al incorporar Al en solución. Experiencias de calorimetría diferencial de barrido
ABSTRACT U(Mo) alloys are being studied to be applied as a fuel for research and test reactors. When U(Mo) particles are dispersed in an Al matrix, it is known that an interdiffusion during fabrication process and / or irradiation. In this sense, irradiation tests have shown that this IL has a bad behavior under irradiation coming up the addition of Si to Al
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Superhydrophobic Copper Foam Supported Phase Change Composites with High Thermal Conductivity for Energy Storage
Superhydrophobic and superoleophilic oxidized copper foam (OCF) was prepared by oxidation of copper foam using (NH4)2S2O8 to generate rough surface then followed by modification with low surface energy substance polydimethylsiloxane (PDMS) and stearic acid (SA). Based on sperwetting, form-stable phase change materials (PCMs) composites were obtained by facil
Mat. Res.. Publicado em: 22/03/2018
-
8. Fibrous PCL/PLLA Scaffolds Obtained by Rotary Jet Spinning and Electrospinning
Rotary jet spinning (RJS) and electrospinning are techniques to obtain fibrous scaffolds. RJS is a simple method, which fabricates three-dimensional fibers by exploiting a high-speed rotating nozzle, creating a polymer jet which stretches until solidification, and does not require high voltage. In opposite, electrospinning technique needs the presence of an
Mat. Res.. Publicado em: 15/03/2018
-
9. Hydrogen Uptake Enhancement by the Use of a Magnesium Hydride and Carbon Nanotubes Mixture
Studies show that the carbon nanotubes (CNTs) serve as hydrogen diffusion channels, when used with magnesium hydride. The hydrogen sorption study, of a MgH2 and 5wt% of multiwalled carbon nanotubes mixture, was the main purpose of this work. The samples were analyzed by means of X-ray diffraction (XRD) and also studied in a differential scanning calorimeter
Mat. Res.. Publicado em: 27/11/2017
-
10. Determination of Microstructure, Mechanical, Electrical and Thermal Properties of The Directionally Solidified Al-Si-Co Ternary Alloy
In this work, Al-12.6Si-2Co (wt.%) ternary alloy of near eutectic composition was directionally solidified at a constant temperature gradient (G=7.60 K/mm) in a wide range of growth rates (V=8.35-166.30 µm/s) using by Bridgman type growth apparatus. Flake spacing (λ), microhardness (HV), tensile stress (σ) and electrical resistivity (ρ) were measured fro
Mat. Res.. Publicado em: 26/02/2016
-
11. Thermomechanical Analysis on Ti-Ni Shape Memory Helical Springs Under Cyclic Tensile Loads
Shape memory alloys (SMAs) present some characteristics, which make it unique material to be use in applications that require strength and shape recovery. This alloys was been used to manufacture smart actuators for mechanical industry devices and several other applications in areas as medicine, robotics, aerospace, petroleum and gas industries. However it i
Mat. Res.. Publicado em: 2015-12
-
12. INTERFACIAL ENERGY DURING THE EMULSIFICATION OF WATER-IN-HEAVY CRUDE OIL EMULSIONS
Abstract The aim of this study was to investigate the interfacial energy involved in the production of water-in-oil (W/O) emulsions composed of water and a Brazilian heavy crude oil. For such purpose an experimental set-up was developed to measure the different energy terms involved in the emulsification process. W/O emulsions containing different water volu
Braz. J. Chem. Eng.. Publicado em: 2015-03