Calcination
Mostrando 25-36 de 201 artigos, teses e dissertações.
-
25. Synthesis of nano-alumina powder via recrystallization of ammonium alum
Resumo No presente estudo, um método de recristalização foi implementado para recuperar pó de alumina a partir de cristais de alúmen de amônio. O alúmen de amônio foi completamente dissolvido em água e tratado por ultrassonicação para evitar a aglomeração do cristal de alúmen. O precipitado branco foi seco a 150 °C por 6 h e as calcinações e
Cerâmica. Publicado em: 06/06/2019
-
26. Study of ZnAl2O4 spinel nanoparticles synthesized using gelatin as organic precursor
Resumo Neste trabalho, pós do espinélio aluminato de zinco foram preparados por um método Pechini modificado, rápido, simples, ambientamento seguro e de baixo custo, utilizando gelatina comercial como precursor orgânico. Os materiais foram calcinados a 600, 700 e 800 °C e caracterizados por análise termogravimétrica, difratometria de raios X (DRX) in
Cerâmica. Publicado em: 06/06/2019
-
27. Study of the structural and morphological properties of copper catalysts supported on Al2O3 and TiO2 synthesized by the impregnation method
ABSTRACT Aluminum oxide and titanium oxide are widely used as catalytic support. Due to their characteristics and properties, they have several applications such as chemical processes, photocatalysis and pollution control. In this work, the catalytic supports of Al2O3 and TiO2 were impregnated with 2% of copper oxide by the method of impregnation. The cataly
Matéria (Rio J.). Publicado em: 20/05/2019
-
28. Estudo de obtenção da membrana cerâmica densa BaCeO3
RESUMO Nos últimos anos, pós cerâmicos à base de óxidos de estrutura do tipo perovskita ganharam atenção considerável devido às suas aplicações tecnológicas na área de membranas permeáveis de oxigênio. O óxido misto BaCeO3 apesenta-se como um material amplamente estudado em uma grande diversidade de aplicações, seja como materiais eletrolí
Matéria (Rio J.). Publicado em: 20/05/2019
-
29. IRON OXIDE AND Fe2O3/Al2O3 USED TO CATALYZE REMOVING HYDROGEN FROM TAIL CHLORINE AT LOW TEMPERATURE
The transition metal oxide, such as iron oxide and Fe2O3/Al2O3 is cheap and industrialized that are widely used to catalyze the reaction of chlorine and oxygen with hydrogen in mixture gas to remove hydrogen from tail chlorine at low temperature. The reaction gas was prepared by the same composition with industrial tail chlorine, namely Cl2 (65% ~ 80%), O2 (
Quím. Nova. Publicado em: 02/05/2019
-
30. Intrinsic Orientation of Hydroxyapatite Grains on the Surface of Dense Pellets Produced by Uniaxial Pressing
Bioceramics synthesized in laboratories must undergo biological tests that consider the final format and all the processing steps involved in the production of the final device. However, in many cases, the synthesized materials are characterized in formats very different from those that will ultimately be implanted into the body. Once living cells are direct
Mat. Res.. Publicado em: 08/04/2019
-
31. Effect of sol-gel processing parameters on structure of zirconia
Abstract The present study reports the experimental results regarding the effect of molar ratio of hydrolysis water used in the sol-gel synthesis upon the structure of zirconia. The ZrO2 materials were synthesized via simple metal-chelate route using zirconium n-propoxide [Zr(OCH2CH2CH3)4], n-propanol, acetic acid, and deionized water. Thermogravimetric anal
Cerâmica. Publicado em: 2019-01
-
32. Impacto do uso de resíduo de vermiculita no estado endurecido de argamassas
Resumo No processo de beneficiamento da vermiculita é gerado um resíduo fino para o qual atualmente ainda não foi desenvolvida uma aplicação que possibilite a utilização em larga escala. Uma alternativa que vem sendo estudada é a associação com cimento Portland em composições de argamassas e concretos, em função da composição química do res�
Cerâmica. Publicado em: 2019-01
-
33. Avaliação do tratamento térmico no catalisador magnético Ni0,5Zn0,5Fe2O4 e sua atividade catalítica na produção de biodiesel por transesterificação e esterificação simultânea do óleo de fritura
Resumo O objetivo deste trabalho foi avaliar o efeito do tratamento térmico na síntese do catalisador Ni0,5Zn0,5Fe2O4 e o desempenho catalítico em reações de transesterificação e esterificação simultânea (TES) do óleo de fritura. Os catalisadores foram sintetizados por reação de combustão sem e com tratamento térmico sequencial a 800 °C com t
Cerâmica. Publicado em: 2019-01
-
34. Synthesis of Modified Silica Aerogel Nanoparticles for Remediation of Vietnamese Crude Oil Spilled on Water
New application of modified silica aerogel nanoparticles was carried out for adsorption of Vietnamese spilled crude oil obtained from Bach-Ho field. The aerogel was synthesized by atmospheric drying method without critical extraction procedure in liquefied CO2 followed by surface modification using polydimethylsiloxane precursor in n-hexane solvent. The synt
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
35. De-NOx Performance and Mechanism of Mn-Based Low-Temperature SCR Catalysts Supported on Foamed Metal Nickel
A series of manganese-based catalysts supported on foamed metal nickel (FMN) with various Mn/Ni ratios was prepared for low-temperature selective catalytic reduction (SCR) of NO with NH3 (NH3-SCR). The effects of calcination temperature, amount of added Mn, optimal operating conditions, and H2O on the elimination of nitrogen oxides (de-NOx) performance of ca
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
36. Síntesis de sílice mesoestructurada: determinación de las condiciones óptimas de extracción del templato
ABSTRACT Ordered mesoporous silica was synthesized by the sol-gel process using tetraethoxysilane (TEOS) as silica source and hexadecyltrimethyl ammonium bromide (CTAB) as structure directing agent. Post-synthesis surfactant removal was conducted by two techniques: calcination, with progressive increases in temperature up to 550 ºC and solvent extraction us
Matéria (Rio J.). Publicado em: 19/07/2018