Bone Biomechanics
Mostrando 1-12 de 34 artigos, teses e dissertações.
-
1. TOMOGRAPHIC STUDY OF THE S2-ALAR-ILIAC SCREW TECHNIQUE IN BRAZILIAN MEN
RESUMO Objetivo O uso de parafusos pediculares foi um marco para a cirurgia moderna de coluna vertebral. Esse tipo de fixação, devido a sua biomecânica superior, deu maior poder de fixação, maior capacidade de resistir às forças de arrancamento e, portanto, maior estabilidade e menores taxas de pseudoartrose. A fixação da junção lombossacra, mesm
Coluna/Columna. Publicado em: 02/09/2019
-
2. BIOMECHANICS OF BONE BLOCK GRAFT MODELS OF DIFFERENT GEOMETRY
RESUMO Objetivo: Avaliar o comportamento mecânico de enxertos ósseos em blocos com geometrias diferentes usando modelos de madeira. Métodos: Montagens com “enxertos” de perfil retangular (G1) e trapezoidal (G2), fixadas com placas de compressão dinâmica de 3,5 mm e oito orifícios, foram submetidas a ensaios não destrutivos de flexão, com a carg
Acta ortop. bras.. Publicado em: 30/05/2019
-
3. SACROPELVIC FIXATION USING ILIAC SCREWS: EVALUATION OF TECHNIQUE AND COMPLICATIONS
RESUMO A fixação sacropélvica surgiu como uma necessidade de proteção à instrumentação sacral em construções longas, devido as falhas na interface implante- osso, e ao tratamento de doenças, nas quais não há possibilidades de fixação sacral, como infecções e tumores. Devido às dificuldades anatômicas e à complexa biomecânica espino-pélv
Coluna/Columna. Publicado em: 2019-03
-
4. Investigation of the influence of design details on short implant biomechanics using colorimetric photoelastic analysis: a pilot study
Introduction : The clinical survival of a dental implant is directly related to its biomechanical behavior. Since short implants present lower bone/implant contact area, their design may be more critical to stress distribution to surrounding tissues. Photoelastic analysis is a biomechanical method that uses either simple qualitative results or complex calcul
Res. Biomed. Eng.. Publicado em: 27/11/2015
-
5. Influência do material de infraestrutura e do desajuste vertical de próteses parciais fixas implantossuportadas nas tensões transmitidas às estruturas protéticas e ao tecido ósseo peri-implantar / Influence of framework material and vertical misfit of implant-suported partial prostheses on the stresses in prosthetic structures and peri-implant bone tissue
O objetivo neste estudo foi avaliar a influência do material de infraestrutura e diferentes níves de desajuste vertical na concentração de tensões em prótese parcial fixa implantossuportada (infraestrutura e porcelana de cobertura), parafuso de retenção e tecido ósseo peri-implantar durante o assentamento protético e frente à aplicação de carga
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/02/2012
-
6. Avaliação in vitro da transmissão de carga oclusal em próteses sobre implantes em função da inclinação de implantes através de análise fotoelástica / In vitro evaluation of occlusal load transmission in prosthetic implant according to the inclination of implants by photoelastic analysis
The All-on-Four technique was conceived in order to decrease the length of the cantilever in the rehabilitation of edentulous patients with implant-supported prosthesis. However, still persist questions related to the biomechanical behavior of implants and the proper technique All-on-Four, since issues such as peri-implant bone loss and failure of the prosth
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/09/2011
-
7. Avaliação da deformação média gerada nos intermediários e na região peri-implantar durante as etapas de confecção da prótese parcial fixa parafusada: análise com strain gauges / Evaluation of abutment and simulated bone tissue mean deformation around dental implants, during fabrication stages of screw-retained fixed partial prostheses: strain gauges analysis
A adaptação passiva e estabilidade têm se tornado os dois pré-requisitos de maior importância na escolha dos materiais e técnicas de confecção em prótese implantossuportada. A proposta deste trabalho foi avaliar, com auxílio dos strain gauges ou extensômetros lineares elétricos, a deformação média ocorrida nos intermediários e na região peri
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/05/2011
-
8. Análise tridimensional por elemento finito do comportamento biomecânico de próteses totais fixas implantossuportadas : efeito do tipo de conexão protética, cargas oclusais e número de implantes / Three-dimensional finite element analysis of biomechanics of implant-supported fixed prostheses : effect of connection system, occlusal load, and number of implants
The purpose of this study was to analyze the stress and strain distribution by three-dimensional finite element method in implant supported fixed prostheses and peri-implantar bone region, using two types of implant-abutment connection internal and external, correlated to the effect of axial loadings and number of implants. Virtual models were developed by s
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/04/2011
-
9. Avaliação por elementos finitos de tensões no tecido ósseo peri-implantar durante a osseointegração / Finite element analysis of stresses in peri-implant bone tissue during osseointegration
Forças aplicadas por próteses totais a implantes submersos durante o período deosseointegração podem, em alguns casos, levar ao insucesso clínico. Até o momento não existe trabalho na literatura que quantifique e/ou verifique a distribuição das forças mastigatórias em implantes submersos durante a ação mastigatória de próteses totais convenci
Publicado em: 2011
-
10. ANALYSIS EX VIVO BIOMECHANICS OF TWO METHODS OF OSTEOSYNTHESIS OF PELVIS IN DOGS / ANÁLISE BIOMECÂNICA EX VIVO DE DOIS MÉTODOS DE OSTEOSSÍNTESE DE PELVE EM CÃES
Approximately 25% of all fractures in dogs involve the pelvis, of which 18-46% are iliac fractures. Conservative treatment can be performed in simple cases where minimum displacement occurs fractured fragments. However when there is severe displacement of the fragments, pelvic canal narrowing and involvement of weight bearing, surgical fixation is indicated.
Publicado em: 2010
-
11. Evaluation of abutment and perimplantar region deformation of implant-supported screwed prostheses: an study using strain gauges / Avaliação da deformação do intermediário e região perimplantar de próteses implanto-suportada unitárias parafusada: estudo através da extensometria
The dental implant depends on the supporting bone for its stability and functional longevity. Mechanical behavior and trabecular bone structure affect the interface with the implant. Such knowledge may provide a basis for improvements in the current implant function and design, decreasing bone crest resorption and failure at bone-implant junction. Adequate q
Publicado em: 2010
-
12. ANÃLISE DE SISTEMAS DE IMPLANTES DENTÃRIOS EM MANDÃBULAS EDÃNTULAS COM APLICAÃÃO DE CARREGAMENTO IMEDIATO / Study of the systems of dental implantations for edentulous mandibula with immediate load
The present study aimed at obtaining comparative elements among the guided systems of fixed complete denture with 4 osseointegrated implants with immediate loading, considering the importance of understanding the implant project as a process where biomaterials and biomechanics are assessed. The three-dimensional finite element method was used to analyze the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/10/2009